• [00:02:28] <rcn-ee> Max_Galemin, 110F on mine under high load, with a dvm's thermo probe..
  • [00:04:12] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Quit: Verlassend)
  • [00:06:46] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [00:08:47] <Max_Galemin> rcn-ee: thanks! I definitely have problems with power consumption
  • [00:08:53] * kanru (~kanru@61-228-153-104.dynamic.hinet.net) Quit (Ping timeout: 245 seconds)
  • [00:10:27] <rcn-ee> i did about the same thing as you, tweaked your patch for 2.6.35 and enabled vdd1 1.35... it's pretty warm, i'm thinking of either heatsinking the chip, or just waiting til the pm power scaling hits tmlind..
  • [00:12:14] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) has joined #beagle
  • [00:15:38] * CMoH (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [00:16:58] <Max_Galemin> rcn-ee: yep, I agree with you... the reason why I'm playing with .36 - I want a kernel with lttng support
  • [00:20:58] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) Quit (Ping timeout: 245 seconds)
  • [00:22:41] <Max_Galemin> but I see that it takes too much time to get everything working, so probably good and stable 2.6.32 without lttng is better than unstable 2.6.36 with lttng :)
  • [00:23:56] <rcn-ee> you should give 2.6.27-rc's a try.. much better then 2.6.36...
  • [00:24:07] <rcn-ee> eh... 2.6.37-rc's...
  • [00:25:43] <Max_Galemin> rcn-ee: well, I can try new kernels forever... but life is short :)
  • [00:26:56] <rcn-ee> true, it's just there was a lot of omap stuff merged for 2.6.37, so it's much closer to 2.6.32-bsp..
  • [00:27:41] * topfs2 (~topfs2@xbmc/staff/topfs2) Quit (Remote host closed the connection)
  • [00:28:17] <Max_Galemin> hmm... ok, i'll try, thanks :)
  • [00:29:43] * topfs2 (~topfs2@xbmc/staff/topfs2) has joined #beagle
  • [00:29:51] * Crofton (~balister@adsl-75-37-22-143.dsl.pltn13.sbcglobal.net) Quit (Quit: Leaving)
  • [00:33:51] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) has joined #beagle
  • [00:39:32] <thurbad> can anyone think of a reason that 'd be getting invald argument when trying to insert cmemk these are the relevant settings http://pastebin.com/QWQu1CQa dmesg sasys there's an overlap from 0x80000000->0x8e300000
  • [00:41:45] * killring (~killring@76.226.227.91) Quit (Ping timeout: 245 seconds)
  • [00:45:02] * HokieTux (~bhilburn@wireless-5192.wireless.ece.vt.edu) Quit (Read error: Connection reset by peer)
  • [00:45:47] * killring (~killring@76.226.227.91) has joined #beagle
  • [00:46:27] * HokieTux (~bhilburn@wireless-5192.wireless.ece.vt.edu) has joined #beagle
  • [00:52:30] <thurbad> that kernel space seems wrong to me
  • [00:53:10] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Quit: Leaving.)
  • [00:54:19] <thurbad> it's like the memory hole is not a hole at all
  • [00:54:45] <thurbad> it's the correct total memory, but it shouldn't be contiguous
  • [00:55:16] * jayabharath (~jayabhara@76.237.233.208) has joined #beagle
  • [00:56:29] * mrj10 (~mrj10@63.252.64.254) Quit (Ping timeout: 255 seconds)
  • [01:01:13] * jayabharath1 (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) has joined #beagle
  • [01:01:37] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [01:02:49] * jayabharath (~jayabhara@76.237.233.208) Quit (Ping timeout: 265 seconds)
  • [01:04:24] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [01:04:38] * DesktopMa (~DesktopMa@82.116.73.185) Quit (Ping timeout: 276 seconds)
  • [01:05:40] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Client Quit)
  • [01:06:07] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [01:06:48] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Client Quit)
  • [01:06:48] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) Quit (Ping timeout: 245 seconds)
  • [01:07:14] * jayabharath1 (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) Quit (Ping timeout: 264 seconds)
  • [01:08:53] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [01:10:45] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) has joined #beagle
  • [01:12:05] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Client Quit)
  • [01:12:32] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) has joined #beagle
  • [01:13:27] * mrj10 (~mrj10@63.252.64.254) has joined #beagle
  • [01:17:42] * Crofton (~balister@207.47.37.2.static.nextweb.net) has joined #beagle
  • [01:18:25] <thurbad> no ideas?
  • [01:18:26] * DesktopMa (~DesktopMa@82.116.73.185) has joined #beagle
  • [01:19:48] * peabody124 (~peabody12@128.249.96.21) Quit (Quit: peabody124)
  • [01:23:14] * rick_ (~rick@118-160-41-39.dynamic.hinet.net) has joined #beagle
  • [01:30:01] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) has joined #beagle
  • [01:32:43] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [01:44:43] * PsyX (~PsyX@wireless-128-62-165-158.public.utexas.edu) Quit (Ping timeout: 245 seconds)
  • [01:47:26] * Crofton (~balister@207.47.37.2.static.nextweb.net) Quit (Ping timeout: 264 seconds)
  • [01:48:14] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [01:53:38] * Max_Galemin (~Max@203.192.146.149) has left #beagle
  • [02:06:02] * gdm (~gdm@186.18.69.144) has joined #beagle
  • [02:10:12] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [02:26:12] * theholyduck (~holyduck@82.147.59.59) Quit (Read error: Connection reset by peer)
  • [02:27:10] * Guest67520 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [02:42:47] * Zoxc (Zoxc@ti0128a380-dhcp0526.bb.online.no) Quit ()
  • [02:43:12] * Xerion_ (~xerion@54194281.cm-5-2b.dynamic.ziggo.nl) has joined #beagle
  • [02:43:12] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) Quit (Quit: Leaving)
  • [02:44:59] * Xerion (~xerion@54194281.cm-5-2b.dynamic.ziggo.nl) Quit (Ping timeout: 240 seconds)
  • [02:44:59] * Xerion_ is now known as Xerion
  • [02:49:15] * Guest67520 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [02:54:44] * chiques (~tony@pool-98-112-74-151.lsanca.fios.verizon.net) has joined #beagle
  • [02:55:41] <chiques> What is the difference between J4 GPIO Signals and J4 LCD Signals?
  • [03:39:02] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Read error: Connection reset by peer)
  • [04:00:33] * cody_ (~cody@dslb-084-056-077-037.pools.arcor-ip.net) has joined #beagle
  • [04:03:43] * cody (~cody@dslb-084-056-112-252.pools.arcor-ip.net) Quit (Ping timeout: 250 seconds)
  • [04:04:32] * dscience (~chatzilla@202.155.233.94) has joined #beagle
  • [04:07:19] <thurbad> interesting.. I assigned memory to fb1 and my video went away
  • [04:08:06] <thurbad> not all video just my video that was in an SDL overlay
  • [04:09:27] * Max_Galemin (~Max@203.192.146.149) has joined #beagle
  • [04:11:30] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Quit: Lost terminal)
  • [04:11:54] * prpplague (~danders@nat/ti/x-odjsanxzrybxilxy) Quit (Quit: Leaving)
  • [04:14:11] * GPSFan (~kenm@64.92.145.112) Quit (Quit: Leaving)
  • [04:21:04] * xxiao (~xxiao@70.114.141.218) has joined #beagle
  • [04:25:06] * aholler_ (~aholler@p57B201DC.dip0.t-ipconnect.de) has joined #beagle
  • [04:27:01] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [04:27:10] <xxiao> fatload mmc 0:1 80300000 uImage shows "reading uImage", then it stops there forever, what could go wrong?
  • [04:28:19] * aholler (~aholler@p57B2083B.dip0.t-ipconnect.de) Quit (Ping timeout: 240 seconds)
  • [04:30:40] <buZz> corrupt file?
  • [04:32:29] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [04:35:17] <thurbad> are you in a u-boot command shell?
  • [04:35:34] <xxiao> buZz: don't know, i'm using B5, still it should load the file then exits i think
  • [04:35:35] * dscience (~chatzilla@202.155.233.94) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026200743])
  • [04:36:12] <thurbad> do you have a log you could post at pastebin?
  • [04:36:12] * amitk (~amit@122.169.41.226) has joined #beagle
  • [04:36:20] <xxiao> MLO loads u-boot.bin from mmc just fine, also mmc part 0 showed fat32 partition and fatinfo also showed normal
  • [04:36:55] <xxiao> it seems i don't need press user button to trigger boot-from-mmc?
  • [04:37:03] * Max_Galemin (~Max@203.192.146.149) has left #beagle
  • [04:37:16] <thurbad> nope, shouldn't need to do that
  • [04:43:01] <xxiao> why can't read uImage while it's fine for MLO to load u-boot.bin remains a mystery
  • [04:44:19] <thurbad> hard to say if you won't answer background questions
  • [04:46:05] <xxiao> http://pastebin.com/J1nN9NvS
  • [04:46:34] * Zenton``` (~user@236.Red-79-149-83.staticIP.rima-tde.net) has joined #beagle
  • [04:47:17] * Cru_N_cher (~luls_lol@dslb-088-068-152-247.pools.arcor-ip.net) Quit (Ping timeout: 265 seconds)
  • [04:47:21] <xxiao> thurbad: http://pastebin.com/ufSZqfrq
  • [04:47:55] * Zenton`` (~user@213.99.203.38) Quit (Ping timeout: 240 seconds)
  • [04:49:22] <thurbad> where are you doing fatload?
  • [04:49:55] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) Quit (Quit: Leaving.)
  • [04:50:02] <xxiao> the first partition of the mmc
  • [04:50:08] <xxiao> load it from mmc to memory
  • [04:50:24] <xxiao> the second pastebin is more detailed
  • [04:50:28] <xxiao> done manually
  • [04:51:21] <thurbad> try just 'fatload 0 80200000 uImage'
  • [04:51:28] * CruNcher (~luls_lol@dslb-188-097-130-067.pools.arcor-ip.net) has joined #beagle
  • [04:54:33] <xxiao> thurbad: the same, it hangs there
  • [04:54:43] <xxiao> fatload mmc 0 80200000 uImage
  • [04:55:12] <thurbad> and you're sure that uImage is on your first SD partition?
  • [04:55:24] <xxiao> yes, MLO/u-boot.bin/uImage
  • [04:56:08] <xxiao> i can use 'fatls mmc 0 /' to see it
  • [04:56:24] <xxiao> or shoot, it's uimage
  • [04:57:10] <xxiao> it's all lower case, does it matter in fat32?
  • [04:57:18] <xxiao> mlo, u-boot.bin, uimage
  • [04:57:49] * Gopal (7376e0a3@gateway/web/freenode/ip.115.118.224.163) has joined #beagle
  • [04:58:23] <thurbad> try fatload mmc 0 80200000 uimage
  • [04:58:42] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [04:58:43] <thurbad> if that works then case still matters
  • [04:59:07] <xxiao> still hang there, let me go back and fix those cases, don't know what happened
  • [04:59:29] <thurbad> I wouldn't think that it would because it is fat32, but you never know how much of the driver is actually present in u-boot
  • [05:00:38] <xxiao> i'm using a fairly new u-boot i would assume that should be fine now, only concern is that, i'm B5, and unsure if the mmc card matters here
  • [05:00:59] <xxiao> again mmc loads u-boot and ran
  • [05:01:45] <xxiao> SD version 1.10, Bus Width: 4-bit, based on mmcinfo
  • [05:02:03] <xxiao> it's 1GB and non high capacity
  • [05:06:19] <xxiao> it's strange that the FAT32 partition under my host still shows uImage, but under u-boot it's uimage
  • [05:06:46] <thurbad> is it the right size?
  • [05:07:32] <xxiao> yes
  • [05:07:52] <xxiao> i'm trying to make the second partition ext2 and see if i can load anything under u-boot
  • [05:08:55] * BThompsonGR (~bernie@cpe-76-183-65-93.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [05:10:09] <xxiao> do you happen to recall how long for mmc to load uImage(2.5MB), normally?
  • [05:13:20] <xxiao> ext2load mmc 0:2 80200000 init 107460, also pause forever
  • [05:13:46] <xxiao> somehow i can not load stuff from this SD card with the newest u-boot
  • [05:14:04] <thurbad> a recent uimage is more like 3.1M last I looked
  • [05:14:45] <xxiao> could be, the problem is that it should at least loads then die at boot time
  • [05:15:11] <thurbad> what kernel version are you using?
  • [05:15:45] <xxiao> 2.6.32
  • [05:15:48] <xxiao> for android
  • [05:15:57] <Gopal> Hi, has anyone tried ubuntu 10.04 from "rcn-eee.net"? I am having a small problem - the desktop does not show any icons or panel. I am seeing it via VNC server
  • [05:17:01] <thurbad> xxiao, you've double checked that the size is correct for that file?
  • [05:17:19] <xxiao> yes, same bytes
  • [05:17:28] <thurbad> might want to check the md5sum as well if you haven't already
  • [05:17:35] <xxiao> just filename changes to all lower case
  • [05:17:42] <xxiao> will do that now
  • [05:19:50] * kkurbjun (~kkurbjun@c-24-9-122-9.hsd1.co.comcast.net) has left #beagle
  • [05:20:36] <xxiao> md5sum sane
  • [05:22:18] <xxiao> why 80200000 while elinux says 8030000 everywhere
  • [05:22:40] <xxiao> trying a different u-boot.bin now, either it's u-boot.bin or my MMC card i guess
  • [05:23:02] <thurbad> maybe it's different for android, I've used 8020000 for angstrom the whole time
  • [05:24:37] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [05:24:50] <hitlin37> gm
  • [05:25:54] <xxiao> thurbad: tried a u-boot from my Oct.20 built, and fatload works now kernel boots.
  • [05:26:05] <xxiao> thanks for helping me to debug
  • [05:29:56] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [05:34:54] <xxiao> android runs well.
  • [05:36:52] * zodttd (~me@user-0c90n0l.cable.mindspring.com) Quit (Ping timeout: 265 seconds)
  • [05:37:06] <Gopal> Hi, has anyone tried ubuntu 10.04 from "rcn-eee.net"? I am having a small problem - the desktop does not show any icons or panel. I am seeing it via VNC server
  • [05:37:21] * xxiao (~xxiao@70.114.141.218) has left #beagle
  • [05:38:14] * rick_ (~rick@118-160-41-39.dynamic.hinet.net) Quit (Remote host closed the connection)
  • [05:38:15] * mIKEjONES (~mIKEjONES@orbital.rh.rit.edu) Quit (Quit: leaving)
  • [05:44:08] <thurbad> I imagine rcn-ee has.. if he's around
  • [05:55:00] * lifeeth (~praneeth@202.3.77.232) has joined #beagle
  • [05:55:00] * lifeeth (~praneeth@202.3.77.232) Quit (Changing host)
  • [05:55:00] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  • [06:02:05] * russ (foobar@ip70-176-251-1.ph.ph.cox.net) has joined #beagle
  • [06:06:13] * mrc3_ (~mrc3@nat/ti/x-bleyqtwlwzjznold) Quit (Remote host closed the connection)
  • [06:06:46] * mrc3_ (~mrc3@nat/ti/x-erxgmbyeymjlsmqt) has joined #beagle
  • [06:11:23] * Zenton``` (~user@236.Red-79-149-83.staticIP.rima-tde.net) Quit (Ping timeout: 245 seconds)
  • [06:12:03] * tdh2002 (~tdh2002@58.63.95.240) has joined #beagle
  • [06:17:43] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) has joined #beagle
  • [06:17:47] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) Quit (Read error: Connection reset by peer)
  • [06:26:59] * sog (~sog@123.50.41.179) has joined #beagle
  • [06:27:12] * sog is now known as Sog
  • [06:27:47] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) has joined #beagle
  • [06:28:44] * amitk (~amit@122.169.41.226) Quit (Remote host closed the connection)
  • [06:28:56] * amitk (~amit@122.169.41.226) has joined #beagle
  • [06:29:33] * amitk (~amit@122.169.41.226) Quit (Client Quit)
  • [06:29:54] * amitk (~amit@122.169.41.226) has joined #beagle
  • [06:30:55] <Sog> Hi, all, it's passiable I turn off power for Beagleboard IIC2 controller by PRCM? It's it wake up feature ?
  • [06:31:22] <_av500_> what does the TRM say?
  • [06:34:57] <Sog> I check TRM.
  • [06:36:28] <Sog> It's seems wake up or enable feature.
  • [06:37:20] <Sog> I would like use the feature by echo command.
  • [06:39:37] <Sog> Enable is for I2C2 clock enable and another is I2C Wake-up event enable/disalbe (PM_WKEN1_CORE EN_I2C2).
  • [06:47:25] * tassleho1f (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [06:52:19] * ant_ (~andrea@host191-253-dynamic.16-79-r.retail.telecomitalia.it) Quit (Remote host closed the connection)
  • [07:02:32] * amitk is now known as amitk-afk
  • [07:03:24] * Openfree` (~Openfreer@116.228.88.131) Quit (Read error: Connection reset by peer)
  • [07:04:39] * Openfree` (~Openfreer@116.228.88.131) has joined #beagle
  • [07:07:17] * syno (~oz@nat/ti/x-rfnyhmgsdavraibo) Quit (Remote host closed the connection)
  • [07:07:33] * syno (~oz@nat/ti/x-llxzxotuhgipbhjo) has joined #beagle
  • [07:25:01] * russ (foobar@ip70-176-251-1.ph.ph.cox.net) Quit (Ping timeout: 252 seconds)
  • [07:28:13] <hitlin37> whats T2EE extension?
  • [07:29:25] * amitk-afk (~amit@122.169.41.226) Quit (Ping timeout: 252 seconds)
  • [07:36:31] <_av500_> something for trustzone i guess
  • [07:37:52] <ds2> extension to support the terminator's team of EE's?
  • [07:37:53] <ds2> :D
  • [07:38:56] <tub_girl> dammit
  • [07:39:02] <tub_girl> i do not need to start racing dirt bikes too
  • [07:39:06] <tub_girl> snowmobiles are expensive enough
  • [07:39:29] * tub_girl is now known as Animule
  • [07:39:48] <hitlin37> ok
  • [07:41:21] <mru> t2ee is not tz related
  • [07:43:11] * amitk (~amit@122.169.41.226) has joined #beagle
  • [07:45:07] * Gopal (7376e0a3@gateway/web/freenode/ip.115.118.224.163) Quit (Ping timeout: 265 seconds)
  • [07:46:02] * leo_ (~leo@n116484130.netvigator.com) has joined #beagle
  • [07:46:15] <hitlin37> then ...something with eabi?
  • [07:46:59] <ds2> T2EE is time zone invariant? :D
  • [07:47:01] * leo_ (~leo@n116484130.netvigator.com) Quit (Client Quit)
  • [07:50:00] <hitlin37> a tag described as "intended use of optional architectural extensions"
  • [07:53:41] * rick_ (~rick@118-160-41-39.dynamic.hinet.net) has joined #beagle
  • [07:56:35] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) Quit (Remote host closed the connection)
  • [07:57:23] * bibr (~ahan@2001:470:dc88:2:5eff:35ff:fe05:806a) Quit (Remote host closed the connection)
  • [07:57:38] * _av500_ trusts mru on tz
  • [07:58:48] * L_3_0 (~chatzilla@202.155.233.94) has joined #beagle
  • [08:02:50] * tassleho1f is now known as tasslehoff
  • [08:04:15] * Guest67520 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [08:04:27] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 265 seconds)
  • [08:04:43] * L_3_0 (~chatzilla@202.155.233.94) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026200743])
  • [08:07:03] <mru> t2ee = thumb2 execution environment
  • [08:07:32] * Proxyles (~henrik@c-0890e255.56-4-64736c14.cust.bredbandsbolaget.se) has joined #beagle
  • [08:09:54] <mru> it's a mode with some extra checks meant to support managed code environments
  • [08:12:56] * Entasis (~Jarred@ppp118-210-113-58.lns20.adl2.internode.on.net) has joined #beagle
  • [08:13:29] * courville (~courville@archos.rain.fr) has joined #beagle
  • [08:15:23] <ds2> but the terminator needs a team of EEs too
  • [08:17:44] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) has joined #beagle
  • [08:18:28] <mru> I suppose he does
  • [08:19:54] * jpsaman (~jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:30:27] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [08:31:28] * L_3_0 (~chatzilla@202.155.233.94) has joined #beagle
  • [08:32:53] * L_3_0 (~chatzilla@202.155.233.94) Quit (Client Quit)
  • [08:36:56] * dscience (~leo@n116484130.netvigator.com) Quit (Quit: leaving)
  • [08:37:41] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [08:39:17] * gadiyar (~chatzilla@192.163.20.231) has joined #beagle
  • [08:39:23] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) Quit (Quit: Leaving)
  • [08:40:24] * dscience (~leo@n116484130.netvigator.com) Quit (Client Quit)
  • [08:41:20] * bibr (~ahan@2001:470:dc88:2:5eff:35ff:fe05:806a) has joined #beagle
  • [08:47:45] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [08:48:28] * niclas (~niclas@nat/ti/x-titogxkpdmwtsodh) has joined #beagle
  • [08:48:48] * dscience (~leo@n116484130.netvigator.com) Quit (Client Quit)
  • [08:51:35] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [08:51:46] * dscience (~leo@n116484130.netvigator.com) Quit (Client Quit)
  • [08:52:05] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [08:56:40] * _koen_ (~x0115699@nat/ti/x-zqempqsucrzbtmfd) has joined #beagle
  • [08:57:58] <mru> morning _koen_
  • [09:02:33] <av500> morning _koen_
  • [09:03:28] <_koen_> good morning all
  • [09:03:51] <av500> _koen_: you did not mention you were at electronica
  • [09:06:26] <_koen_> because I wasn't
  • [09:06:33] <_koen_> the wall was, but I wasn't
  • [09:07:31] <av500> ic
  • [09:07:37] <mru> I bet he was hiding behind the wall all the time
  • [09:07:43] <av500> i missunderstood ssc then
  • [09:09:13] * ceyusa (~vjaquez@95.61.238.167) has joined #beagle
  • [09:10:59] <ds2> hehe
  • [09:15:35] <tdh2002> i am going to get off .
  • [09:15:43] <tdh2002> You just wake up - -
  • [09:22:14] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [09:24:43] * Beagle3 (~Beagle3@61.191.143.66) has joined #beagle
  • [09:25:13] * Beagle3 (~Beagle3@61.191.143.66) Quit (Client Quit)
  • [09:25:45] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [09:25:50] * l_3_0 (~chatzilla@202.155.233.94) has joined #beagle
  • [09:26:54] * l_3_0 (~chatzilla@202.155.233.94) Quit (Client Quit)
  • [09:30:36] * florian_kc (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [09:30:47] * florian_kc is now known as florian
  • [09:34:59] * dscience (~leo@n116484130.netvigator.com) Quit (Quit: leaving)
  • [09:38:03] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
  • [09:38:59] * tdh2002 (~tdh2002@58.63.95.240) has left #beagle
  • [09:40:21] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) has joined #beagle
  • [09:49:21] * raster (raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [09:52:07] * raster (raster@enlightenment/developer/raster) has joined #beagle
  • [09:52:44] * raster (raster@enlightenment/developer/raster) Quit (Remote host closed the connection)
  • [09:54:39] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 265 seconds)
  • [09:56:04] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [09:57:13] * faLUCE (~ocs@83.139.194.194) has joined #beagle
  • [09:57:52] <faLUCE> hi. I have to choose between a pico-itx and a beagleboard. what are the advantages of choosing a beagleboard? thanks
  • [10:06:19] * An (75c3260a@gateway/web/freenode/ip.117.195.38.10) has joined #beagle
  • [10:06:45] * An is now known as Guest72336
  • [10:07:19] * jpirko (~jirka@nat/redhat/x-gbxerjbfxifhmnyj) has joined #beagle
  • [10:12:32] * Guest72336 (75c3260a@gateway/web/freenode/ip.117.195.38.10) Quit (Ping timeout: 265 seconds)
  • [10:16:10] * amitk is now known as amitk-afk
  • [10:19:46] * aholler_ is now known as aholler
  • [10:22:13] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Ping timeout: 245 seconds)
  • [10:22:24] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [10:32:08] * Sog (~sog@123.50.41.179) Quit (Read error: Connection reset by peer)
  • [10:34:57] * CMoH-office (~cipi@89.238.251.90) has joined #beagle
  • [10:34:57] * CMoH-office (~cipi@89.238.251.90) Quit (Changing host)
  • [10:34:57] * CMoH-office (~cipi@unaffiliated/c-moh) has joined #beagle
  • [10:36:51] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) has joined #beagle
  • [10:39:02] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Quit: peabody124)
  • [10:48:27] * amitk-afk is now known as amitk
  • [10:54:38] * markos_ (~markos@athedsl-427436.home.otenet.gr) has joined #beagle
  • [10:55:55] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) has joined #beagle
  • [10:56:18] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [11:00:22] * dscience (~leo@n116484130.netvigator.com) has left #beagle
  • [11:09:18] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Ping timeout: 245 seconds)
  • [11:11:31] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) has joined #beagle
  • [11:25:33] * lifeeth (~praneeth@202.3.77.232) has joined #beagle
  • [11:25:33] * lifeeth (~praneeth@202.3.77.232) Quit (Changing host)
  • [11:25:33] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  • [11:28:54] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) Quit (Ping timeout: 265 seconds)
  • [11:29:36] * naeg_ (~naeg@194.208.239.170) has joined #beagle
  • [11:30:25] * naeg (~naeg@194.208.239.170) Quit (Read error: Connection reset by peer)
  • [11:32:50] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) has joined #beagle
  • [11:34:12] * ScriptRipper__ (~mmohring@p4FDBAE3F.dip.t-dialin.net) has joined #beagle
  • [11:34:13] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [11:43:03] * naeg_ (~naeg@194.208.239.170) Quit (Ping timeout: 245 seconds)
  • [11:47:01] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
  • [11:48:04] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  • [11:48:23] * pcacjr (~pcacjr@187.113.114.206) has joined #beagle
  • [11:48:23] * pcacjr (~pcacjr@187.113.114.206) Quit (Changing host)
  • [11:48:23] * pcacjr (~pcacjr@unaffiliated/pcacjr) has joined #beagle
  • [11:50:45] * lifeeth_ (~praneeth@202.3.77.232) has joined #beagle
  • [11:50:45] * lifeeth_ (~praneeth@202.3.77.232) Quit (Changing host)
  • [11:50:45] * lifeeth_ (~praneeth@unaffiliated/lifeeth) has joined #beagle
  • [11:50:49] * lifeeth_ (~praneeth@unaffiliated/lifeeth) Quit (Remote host closed the connection)
  • [11:56:03] * naeg_ (~naeg@194.208.239.170) has joined #beagle
  • [12:23:04] * drakkan1000 (~drakkan@62.123.237.207) Quit (Ping timeout: 265 seconds)
  • [12:32:59] * drakkan1000 (~drakkan@62.123.237.207) has joined #beagle
  • [12:35:44] * ksinkar (~ksinkar@static-mum-59.181.108.105.mtnl.net.in) Quit (Remote host closed the connection)
  • [12:36:57] * lifeeth (~praneeth@unaffiliated/lifeeth) Quit (Quit: Up and at 'em, Atom Ant!)
  • [12:42:09] * CruNcher (~luls_lol@dslb-188-097-130-067.pools.arcor-ip.net) Quit ()
  • [12:42:23] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [12:43:03] * slchen_ (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [12:43:04] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Read error: Connection reset by peer)
  • [12:43:05] * slchen_ is now known as slchen
  • [12:45:45] * huier (~huier@119.6.76.222) has joined #beagle
  • [12:47:12] * hitlin37 (6eea0302@gateway/web/freenode/ip.110.234.3.2) Quit (Ping timeout: 265 seconds)
  • [12:48:48] * amitk is now known as amitk-afk
  • [12:52:12] * raster (~raster@221.147.71.45) has joined #beagle
  • [12:52:12] * raster (~raster@221.147.71.45) Quit (Changing host)
  • [12:52:12] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [12:55:47] <koen> sakoman_: http://gitorious.org/beagleboard-validation/u-boot/commits/koen/beagle-2010.12 gives me time outs on B6 boards, do you see the same on ES2.0 overos?
  • [12:57:49] * rcranetx (~rcranetx@nat/ti/x-vtubfrahrxcentpi) has joined #beagle
  • [13:05:23] * lifeeth (~praneeth@202.3.77.232) has joined #beagle
  • [13:05:23] * lifeeth (~praneeth@202.3.77.232) Quit (Changing host)
  • [13:05:23] * lifeeth (~praneeth@unaffiliated/lifeeth) has joined #beagle
  • [13:08:50] * amitk-afk (~amit@122.169.41.226) Quit (Read error: Operation timed out)
  • [13:10:19] * ScriptRipper__ (~mmohring@p4FDBAE3F.dip.t-dialin.net) Quit (Ping timeout: 240 seconds)
  • [13:15:56] * amitk (~amit@122.169.40.134) has joined #beagle
  • [13:18:21] * Gopal (7376f087@gateway/web/freenode/ip.115.118.240.135) has joined #beagle
  • [13:20:39] <Gopal> Hello is anyone online who has tried ubuntu lucid on BB?
  • [13:21:28] <aholler> isn't that already old?
  • [13:21:58] <rcn-ee> it's 7 months old, anyways Gopal your email has been answerd.
  • [13:27:23] <Gopal> rcn-ee. thanks for reply.. But I am not able to see that bottom panel with drop down boxes
  • [13:27:46] <Gopal> Do I need to change resolution I guess?
  • [13:29:24] <rcn-ee> That bottom panel doesn't show up at all? (gdm-theme's should add it) you could try changing resolution.. but if that doesn't work, just use maverick, as it doesn't suffer from, lets use xterm by default bug...
  • [13:32:46] * av500 lols at http://focus.ti.com/en/graphics/wtbu/OMAP3621.jpg
  • [13:33:26] <mru> 21?
  • [13:33:44] <av500> yep :)
  • [13:33:51] <av500> its a strip down 30 for ebook mkt
  • [13:34:09] <mru> package looks odd too
  • [13:34:13] <mru> not like any omap I've seen
  • [13:34:22] <av500> mru: i dont think that is the actual chip :)
  • [13:34:32] <av500> but having a high res logo seems to be a must :)
  • [13:35:03] * Gopal (7376f087@gateway/web/freenode/ip.115.118.240.135) Quit (Ping timeout: 265 seconds)
  • [13:35:33] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
  • [13:36:07] <av500> mru: http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?contentId=65895&navigationId=12854&templateId=6123
  • [13:37:39] * jconnolly|away is now known as jconnolly
  • [13:39:22] <dm8tbr> av500: let me guess, regular omap3 sans IVA things, because who would want to watch 1080p content on an 640x480 1bit screen at 0,2fps
  • [13:39:34] <koen> av500: that uses the dsp to create the needed waveform for the e-ink
  • [13:39:34] <av500> no
  • [13:39:48] <av500> koen: yep
  • [13:40:17] <av500> koen: iUniversal? :)
  • [13:40:45] <dm8tbr> interesting
  • [13:40:51] <av500> or IEInk
  • [13:41:00] * grund (~grund@firebug.buglabs.net) has joined #beagle
  • [13:41:49] <tasslehoff> hm. another transcend 16gb class 6 SD tried and failed (http://pastebin.com/qm17QTm4). anyone seen messages like this with other sd-brands/classes/sizes?
  • [13:42:44] <tasslehoff> none of my kingston 16gb class 2 cards have done this to me
  • [13:43:12] <koen> av500: no, bridge
  • [13:43:15] <av500> maybe the card "transcended"
  • [13:45:10] <mru> #ifdef FIXME
  • [13:45:31] <av500> #error FIXME!
  • [13:45:32] <av500> #endif
  • [13:45:35] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) has joined #beagle
  • [13:45:35] * torez (~torez@cpe-70-123-140-186.austin.res.rr.com) Quit (Client Quit)
  • [13:49:55] * likewise (~likewise@205-89-ftth.onsneteindhoven.nl) has joined #beagle
  • [13:51:16] * Gopal (7376f224@gateway/web/freenode/ip.115.118.242.36) has joined #beagle
  • [13:51:34] <aholler> #else #warning you loose! is missing
  • [13:51:53] <Gopal> rcn-ee, when I log in with Xfce session, it terminates the session. But with xterm, the log in is normal
  • [13:52:10] <av500> aholler: who wants to see all these warnings all the time
  • [13:52:35] <aholler> i like them, at least I know afterwards why nothing works ;)
  • [13:54:42] <tasslehoff> I use XorA's script, but modified the sfdisk-command to create four partitions. Odd if that should matter to Transcend but not to Kingston (I think)
  • [13:55:42] <av500> i highly doubt it is the number of partititions
  • [13:56:11] <av500> i guess you cwillu_at_work and hiw industrial grade cards
  • [13:56:19] <av500> i guess you need cwillu_at_work and his industrial grade cards
  • [13:56:33] * cwillu_at_work is pung
  • [13:57:41] <tasslehoff> av500: yeah. I just wondered if it's possible to feed sfdisk something that gives bad alignment or something...
  • [13:57:58] <cwillu_at_work> journalled filesystems on consumer sd/microsd cards are hilarity waiting to happen if you don't ensure the write load is kept to a minimum
  • [13:59:21] * BThompson (~a0193480@nat/ti/x-tcklroewwdntniti) has joined #beagle
  • [13:59:41] <av500> tasslehoff: so align it properly
  • [13:59:52] <av500> powers of 2 are always a good choise
  • [14:00:00] <av500> multiples of 63 are not
  • [14:00:22] <av500> unless you find a 2^M = M*63
  • [14:02:01] <tasslehoff> I've added only cylinder count, without really knowing what happens on the lowest level :)
  • [14:02:09] * zodttd (~me@user-0c90n0l.cable.mindspring.com) has joined #beagle
  • [14:02:30] <av500> tasslehoff: and you hear the little "cylinders" whirring around when you hold your ear close to the card?
  • [14:03:42] <tasslehoff> av500: no, cause my ear protests loudly against being held
  • [14:07:24] <tasslehoff> cwillu_at_work: hm. I've been pondering not using journals, but haven't found any good resources saying clearly "do" or "don't"
  • [14:07:40] * katie (~katierh@nat/ti/x-vzoongvylmredxpt) has joined #beagle
  • [14:09:12] <cwillu_at_work> tasslehoff, the problem is that if you don't have a good wear levelling (i.e., the 32 erase-block wear levelling typical on flash counts as "not good"), the journal ends up not being properly levelled. If you have lots of writes on a journalled filesystem, you'll end up with write errors in the journal itself, with hilarious consequences
  • [14:09:46] <av500> tasslehoff: do you have a lot of "writes"?
  • [14:09:47] <cwillu_at_work> on the other hand, if you don't use a journal, then you have different problems on any hard reset
  • [14:09:59] <cwillu_at_work> logging files seem to be a popular killer
  • [14:10:16] * cwillu_at_work uses btrfs now :p
  • [14:10:56] * likewise (~likewise@205-89-ftth.onsneteindhoven.nl) Quit (Quit: likewise)
  • [14:10:58] <cwillu_at_work> you should get at least 3 months out of any random sd card, assuming no power cuts at an awkward time for the card, and a fairly heavy write load
  • [14:11:40] <cwillu_at_work> it's not uncommon for a powercut to trounce a card if you catch it at the wrong time (i.e., while it's juggling erase block data)
  • [14:11:46] <tasslehoff> av500: well. after setting up the SD, things go bad during the first boot.
  • [14:12:00] <av500> hmm
  • [14:12:07] <tasslehoff> before any of my applications have started
  • [14:12:16] <av500> and setting up is done using dd?
  • [14:12:18] <cwillu_at_work> is this a new'ish card?
  • [14:12:30] <cwillu_at_work> eww, dd to an sd card? :p
  • [14:12:43] * cwillu_at_work has all sorts of wacky opinions on the matter :p
  • [14:12:44] <tasslehoff> cwillu_at_work: I've tried 2 brand new ones, and both failed on first boot. that's why I suspect tasslehoff
  • [14:12:45] <av500> sd to a dd card?
  • [14:13:27] <tasslehoff> My script is pretty much the same as this: http://git.openembedded.org/cgit.cgi/openembedded/tree/contrib/angstrom/omap3-mkcard.sh
  • [14:13:51] <cwillu_at_work> okay, that's not a dd then
  • [14:14:01] <tasslehoff> cwillu_at_work: it starts with a dd
  • [14:14:02] <cwillu_at_work> which means it's possibly sane :)
  • [14:14:03] <tasslehoff> :)
  • [14:14:06] <cwillu_at_work> ewww
  • [14:14:08] <cwillu_at_work> don't do that
  • [14:14:28] <cwillu_at_work> although that's only writing a meg
  • [14:14:34] <cwillu_at_work> not zeroing out the whole card
  • [14:14:40] <cwillu_at_work> so do that, fine :p
  • [14:15:00] <cwillu_at_work> tasslehoff, if you mount it back on the machine you make the image on, can you read the whole image back?
  • [14:15:15] <cwillu_at_work> i.e., mount it and rsync back to your drive, or dd from the device to dev/null?
  • [14:15:53] <cwillu_at_work> that would establish that your cards aren't to blame
  • [14:15:56] <tasslehoff> cwillu_at_work: after mounting it back on the maching, it will (sometimes) refuse to mount one or two partitions.
  • [14:16:05] <tasslehoff> ma-ching
  • [14:16:10] <cwillu_at_work> refuse ==?
  • [14:16:12] <av500> mashing?
  • [14:16:24] <cwillu_at_work> don't mash your cards
  • [14:16:41] * av500 prefers blineding
  • [14:16:43] <av500> blending
  • [14:16:58] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 252 seconds)
  • [14:17:41] <djlewis> gm
  • [14:18:09] <av500> gm
  • [14:18:49] <djlewis> our morning log reads like some people are having an extended friday :)
  • [14:19:10] * SzosszeNET (5b529f0c@gateway/web/freenode/ip.91.82.159.12) has joined #beagle
  • [14:19:27] <SzosszeNET> hello
  • [14:20:18] <aholler> tasslehoff: just do a sha1sum on the image and /dev/mmc* to verify your dd doesn't fail
  • [14:20:33] <aholler> sd-cards are pretty unreliable.
  • [14:20:35] <tasslehoff> cwillu_at_work: trying the dd now.
  • [14:21:13] * djlewis 's 4GB c^ transcends are all flakey after the first year
  • [14:21:17] <cwillu_at_work> tasslehoff, sorry, you said mounting it on the original machine gave you troubles?
  • [14:21:17] <djlewis> c6
  • [14:21:23] <tasslehoff> aholler: the image is not dd'ed over.
  • [14:21:43] <SzosszeNET> just one question. According to BB-xM manual "A standard HDMI cable can be used when connecting to a monitor with an HDMI connector." This applies also to TV with HDMI port?
  • [14:21:54] <cwillu_at_work> SzosszeNET, yes, except no audio or remote
  • [14:21:56] <cwillu_at_work> just video
  • [14:22:17] * mrj10 (~mrj10@63.252.64.254) Quit (Ping timeout: 255 seconds)
  • [14:22:34] <tasslehoff> cwillu_at_work: don't remember the error, and didn't get it this time. trying "dd if=/dev/mmcblk0 of=/dev/null" on the card that gives the errors I pasted earlier on remount.
  • [14:22:48] * NishanthMenon (~nmenon@nat/ti/x-deqwnbknfdnmnqkr) has joined #beagle
  • [14:22:49] <SzosszeNET> cwillu_at_work : thanks :)
  • [14:23:10] <cwillu_at_work> tasslehoff, got the link? I think I missed that paste
  • [14:24:08] <tasslehoff> cwillu_at_work: http://pastebin.com/qm17QTm4
  • [14:24:34] <cwillu_at_work> tasslehoff, you get that on your desktop?
  • [14:24:36] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) has joined #beagle
  • [14:24:41] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) has joined #beagle
  • [14:24:44] <cwillu_at_work> or only on the beagle?
  • [14:26:08] <tasslehoff> cwillu_at_work: the beagle
  • [14:26:19] <cwillu_at_work> and when you dd it on the desktop?
  • [14:26:35] <cwillu_at_work> or mount it on the desktop, and re-read everything on the card (via rsync or whatever)?
  • [14:26:48] <tasslehoff> cwillu_at_work: dd is still running
  • [14:27:16] * amitk (~amit@122.169.40.134) Quit (Ping timeout: 240 seconds)
  • [14:27:28] * mrj10 (~mrj10@130.126.141.233) has joined #beagle
  • [14:27:55] <cwillu_at_work> also, you're using the normal sd read on the beagle, and not a random usb reader or some such, right?
  • [14:28:11] <aholler> rsync -avc, that -c is important
  • [14:28:13] * amitk (~amit@122.169.40.134) has joined #beagle
  • [14:29:03] <tasslehoff> cwillu_at_work: normal sd read
  • [14:29:16] <tasslehoff> aholler: yeah. that should be faster than dd
  • [14:29:27] <cwillu_at_work> (specifically, -c will force it to re-read the entire file for each file, assuming you're rsyncing back over the original image you wrote)
  • [14:29:41] <cwillu_at_work> (if you're rsyncing to an empty folder in /tmp or whatever, the -c doesn't matter)
  • [14:30:18] <aholler> tasslehoff: it's only faster when there is much empty space in the image. that -c ensures that the contents of every file are checked
  • [14:31:35] <aholler> when using rsync to copy the files, you should do that twice. I assume rsync doesn't check the contents after it copied a file
  • [14:31:51] <aholler> so the second one will do that
  • [14:32:08] <aholler> (if your cache is empty)
  • [14:32:44] <tasslehoff> it gave the errors on the first partition, which is a small fat32. dd'ing only that one on the desktop was successful
  • [14:32:54] * av500 suspects tasslehoff is just not wearing enough layers of antistatic clothing
  • [14:33:46] <cwillu_at_work> tasslehoff> it gave the errors on the first partition == on the beagle?
  • [14:34:00] <cwillu_at_work> your pastebin showed an error on the 0p4
  • [14:34:11] * amitk (~amit@122.169.40.134) has left #beagle
  • [14:34:38] <tasslehoff> cwillu_at_work: yes. it was card #1 from the paste
  • [14:34:50] <cwillu_at_work> tasslehoff, that was 0p2
  • [14:35:27] <tasslehoff> cwillu_at_work: there was an error in 0p0 as well? mmcblk0: error -110 transferring data, sector 1001777, nr 8, card status 0xc00
  • [14:35:40] <cwillu_at_work> there's no such thing as 0p0
  • [14:35:56] <tasslehoff> gah. sorry
  • [14:35:59] <cwillu_at_work> mmcblk0 is the whole device; mmcblk0p1 is the first partition
  • [14:36:35] <tasslehoff> 0p2 gave no errors on the desktop
  • [14:37:37] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [14:37:41] * huier (~huier@119.6.76.222) Quit (Ping timeout: 250 seconds)
  • [14:38:42] * huier (~huier@119.6.76.222) has joined #beagle
  • [14:39:09] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  • [14:40:27] * Carloz (629b3371@gateway/web/freenode/ip.98.155.51.113) has joined #beagle
  • [14:40:47] <tasslehoff> hm. 2 boots with the errors, 2 without.
  • [14:42:20] <av500> could your sd slot be flaky or so?
  • [14:42:47] <av500> in other words, using the card only with your pc, do you see errors?
  • [14:43:25] * Entasis (~Jarred@ppp118-210-113-58.lns20.adl2.internode.on.net) Quit (Quit: Leaving)
  • [14:43:30] <aholler> maybe using a tissue to clean the contacts will help. You haven't droped that card into coke or something, have you? ;)
  • [14:44:05] <tasslehoff> aholler: hehe. not that I know of, and kingston is behaving :)
  • [14:44:56] <av500> tasslehoff: still, can you give the card a workout away from the BB and see if it behaves?
  • [14:45:04] <tasslehoff> av500: after failing on the beagle, the sd-card would crash gparted on my system...
  • [14:45:13] <tasslehoff> av500: yeah, I will.
  • [14:46:57] <tasslehoff> gotta pick up at the kindergarten now. I'll continue the sadness tomorrow. thanks for the therapy so far.
  • [14:51:57] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [14:51:59] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Ping timeout: 250 seconds)
  • [14:54:48] * Carloz (629b3371@gateway/web/freenode/ip.98.155.51.113) Quit (Ping timeout: 265 seconds)
  • [15:00:50] * killring_ (~killring@76.226.234.5) has joined #beagle
  • [15:01:32] * gdm (~gdm@186.18.69.144) Quit (Quit: Ex-Chat)
  • [15:03:50] * killring (~killring@76.226.227.91) Quit (Ping timeout: 245 seconds)
  • [15:05:15] * jkridner|work (~a0321898@nat/ti/x-oqalarazprcqfzbo) has joined #beagle
  • [15:07:12] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) Quit (Ping timeout: 265 seconds)
  • [15:09:07] * jkridner|work just confirmed on Digi-Key's site that the original (Rev Cx) BeagleBoard is now $125!
  • [15:09:34] <jkridner|work> BeagleBoard-xM, instead of going up to 1GB of RAM as Gerald had originally planned, is now at $149!
  • [15:09:39] <djlewis> drool, foam at mouth ...
  • [15:09:54] <djlewis> oh, less ram :(
  • [15:10:01] <jkridner|work> not less....
  • [15:10:03] <jkridner|work> the same...
  • [15:10:05] <jkridner|work> 512MB.
  • [15:10:17] <djlewis> < 1GB
  • [15:10:33] <jkridner|work> Previously, the plan was after the initial starting costs of the board were recovered to add the larger memory...
  • [15:10:42] <jkridner|work> but the decision was to drop the price instead.
  • [15:12:49] * dscience (~leo@n116484130.netvigator.com) has joined #beagle
  • [15:13:30] * brijesh (~Brijesh@nat/ti/x-wqntdisrmltvdfja) has joined #beagle
  • [15:13:48] * dscience (~leo@n116484130.netvigator.com) has left #beagle
  • [15:13:51] * ceyusa (~vjaquez@95.61.238.167) Quit (Quit: leaving)
  • [15:16:14] <koen> jkridner|work: you're supposed to be on holiday!
  • [15:16:50] <jkridner|work> as soon as this announcement thing is done (I need to adjust the website), I'm out.
  • [15:16:57] <koen> jkridner|work: http://gitorious.org/beagleboard-validation/u-boot/commits/koen/beagle-2010.12 works on c3/c4/xM, no orange screen, though
  • [15:17:02] * katie (~katierh@nat/ti/x-vzoongvylmredxpt) Quit ()
  • [15:17:58] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) has joined #beagle
  • [15:19:57] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [15:24:28] * mza (~mza@2001:470:dc88:2:21f:e2ff:fe10:3fa) Quit (Read error: Operation timed out)
  • [15:25:35] <jkridner|work> cool. do you know how to add the orange?
  • [15:25:58] * jkridner|work never did finish updating the timings for xM, but they are in the mailing list archives.
  • [15:26:15] <av500> mix red and yellow?
  • [15:27:36] * SzosszeNET (5b529f0c@gateway/web/freenode/ip.91.82.159.12) Quit (Quit: Page closed)
  • [15:28:16] * gadiyar (~chatzilla@192.163.20.231) Quit (Ping timeout: 240 seconds)
  • [15:29:05] * likewise (~likewise@205-89-ftth.onsneteindhoven.nl) has joined #beagle
  • [15:29:16] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) has joined #beagle
  • [15:29:25] * alancam (~a-campbel@nat/ti/x-jqyujjpczvowbuei) has joined #beagle
  • [15:30:19] * torez (~torez@32.97.110.64) has joined #beagle
  • [15:33:00] <koen> jkridner|work: I have the patches for the dss stuff applied, but they don't seem to do anything
  • [15:33:11] <koen> jkridner|work: and I have your patch for the xM timings
  • [15:39:54] * katie (~katierh@nat/ti/x-wdqlpcvfwxisoqbr) has joined #beagle
  • [15:41:50] * CMoH-office (~cipi@unaffiliated/c-moh) Quit (Read error: Connection reset by peer)
  • [15:45:41] * prpplague (~danders@nat/ti/x-ohngctnojglyeddc) has joined #beagle
  • [15:49:11] * jayabharath (~jayabhara@adsl-76-237-233-208.dsl.rcsntx.sbcglobal.net) Quit (Ping timeout: 250 seconds)
  • [15:49:34] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  • [15:50:18] * jkridner|work is dropping off now.... ping me if the info on the website needs more cleaning quickly.
  • [15:50:28] <av500> have fun!
  • [15:51:56] * ozk (~Oz@nat/ti/x-luaiyghdemfnybef) has joined #beagle
  • [15:55:13] <supernaut> Is Narcissus not working for anyone else?
  • [15:55:36] <supernaut> I set up an image last night, and there was no progress on it this morning when i woke up
  • [15:57:48] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Quit: Lost terminal)
  • [15:57:55] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
  • [15:58:07] <koen> supernaut: it worked fine for me 5 minutes ago
  • [15:58:54] * ozk (~Oz@nat/ti/x-luaiyghdemfnybef) Quit ()
  • [15:59:12] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) has joined #beagle
  • [16:01:52] * ozk (~ozk@nat/ti/x-vgpoojfohvuhrpxk) has joined #beagle
  • [16:03:03] * gadiyar (~chatzilla@192.163.20.231) has joined #beagle
  • [16:04:58] * Zoxc (~zoxc@ti0128a380-dhcp0526.bb.online.no) has joined #beagle
  • [16:06:21] * amitk (~amit@122.169.40.134) has joined #beagle
  • [16:09:42] * gdm (~gdm@186.18.69.144) has joined #beagle
  • [16:10:17] * peabody124 (~peabody12@c-98-201-163-94.hsd1.tx.comcast.net) Quit (Quit: peabody124)
  • [16:22:40] <faLUCE> hi. I have to choose between a pico-itx and a beagleboard. what are the advantages of choosing a beagleboard? thanks
  • [16:22:54] <av500> yes
  • [16:23:32] * jpirko (~jirka@nat/redhat/x-gbxerjbfxifhmnyj) Quit (Quit: Leaving)
  • [16:24:15] <av500> the BB is smaller, the pico-itx lets you connect a cpu fan, i'd call it a draw....
  • [16:25:30] * _koen_ (~x0115699@nat/ti/x-zqempqsucrzbtmfd) Quit (Ping timeout: 265 seconds)
  • [16:25:38] * jpsaman (~jpsaman@videolan/developer/jpsaman) Quit (Quit: Leaving)
  • [16:27:34] <emeb> cpu fans FTW!
  • [16:28:06] * likewise (~likewise@205-89-ftth.onsneteindhoven.nl) Quit (Quit: likewise)
  • [16:28:15] * Guest67520 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [16:30:05] * Proxyles (~henrik@c-0890e255.56-4-64736c14.cust.bredbandsbolaget.se) Quit (Quit: Leaving)
  • [16:31:13] <aholler> not to talk about arm vs. x86 ;)
  • [16:31:42] <av500> hair splitting...
  • [16:31:53] * awozniak (~awozniak@76.205.222.173) has joined #beagle
  • [16:32:24] * dyniper (84d2d9ad@gateway/web/freenode/ip.132.210.217.173) has joined #beagle
  • [16:32:29] * jkridner|work (~a0321898@nat/ti/x-oqalarazprcqfzbo) Quit (Ping timeout: 255 seconds)
  • [16:34:13] <dyniper> Hello everybody, i am building a project around the beagleboard and need to showcase the product in 2 weeks. Unfortunatly, i busted it this weekend and its backorder everywhere
  • [16:34:34] <dyniper> is anybody would have one BB to sell for a very desperate person ?
  • [16:34:41] * tconant (~tconant@68.111.35.226) has joined #beagle
  • [16:35:55] <dyniper> Anyone ?, no ?
  • [16:36:04] <dyniper> This this is backorder worldwide!
  • [16:36:45] <dm8tbr> the XM too?
  • [16:36:45] <prpplague> iirc sparkfun had some beagle-xm's in stock
  • [16:37:05] <prpplague> http://www.sparkfun.com/search/results?term=beagle&what=products
  • [16:37:14] <dyniper> Will extension board work with the xm ?
  • [16:37:26] <aholler> you could try to order one from evm
  • [16:37:40] * pH5 (~ph5@e178193109.adsl.alicedsl.de) has joined #beagle
  • [16:37:46] <prpplague> aholler: good luck with that
  • [16:37:58] <aholler> prpplague: why?
  • [16:38:00] <prpplague> aholler: i tried for literally 6 months to purchase one from EVM
  • [16:38:11] <av500> EVM? EVB?
  • [16:38:17] <av500> EBV?
  • [16:38:33] <cwillu_at_work> av500, EMEB
  • [16:38:39] <aholler> evm is the blue beagle ;)
  • [16:38:40] <av500> ah
  • [16:38:54] <av500> aholler: iknow :)
  • [16:38:57] <dyniper> i could not find if the -xm have the same expansion slot
  • [16:39:08] <emeb> cwillu_at_work: hey what's up?
  • [16:39:11] <prpplague> sorry my bad, i meant EVB
  • [16:39:12] <dyniper> also, the evm is rev c2, no ?
  • [16:39:13] <av500> aholler: but it's EBV
  • [16:39:19] <cwillu_at_work> emeb, a bad joke
  • [16:39:27] <emeb> yep.
  • [16:39:28] <aholler> oh, sorry ;)
  • [16:39:48] * florian (~fuchs@Maemo/community/contributor/florian) Quit (Remote host closed the connection)
  • [16:39:57] <aholler> i first wanted to write emv ;)
  • [16:40:56] <av500> dyniper: xm should be compatible, what addon board?
  • [16:41:00] <prpplague> looks like EBV links are dead as well
  • [16:41:01] <prpplague> http://www.ebv.com/en-error.html
  • [16:41:03] <dyniper> custom designed
  • [16:41:19] <mrj10> anyone ever tried to read the bandgap temperature sensor on an OMAP3?
  • [16:42:19] <prpplague> mrj10: i have on both omap3 and omap4, should be able to just use devmem2 and calculate an actual temp
  • [16:42:23] <mrj10> trying to figure out the correct register sequence; i've tried using devmem2 a couple times to poke what i think are the right registers, but one of the register writes keeps causing the system to lock up from a user perspective
  • [16:42:39] <av500> mrj10: clocks turned on?
  • [16:43:02] * theholyduck (~holyduck@82.147.59.59) has joined #beagle
  • [16:43:20] <mrj10> my best guess is that you need to set the BGAPTS enable and TMPSOFF enable in the CONTROL_BGAPTS_WKUP register (@ 0x48002A84)
  • [16:43:34] <mrj10> and turn on the clock by setting bit 1 @ 0x48004A08
  • [16:43:36] <dyniper> Thus, the OS/kernel i have for the REV C4 and the custom expansion board should work fine with the beagleboard-xm ?
  • [16:44:20] <mrj10> then set the Start-Of-Conversion bit (bit 9 of 0x48002524 on the DM3730 (BB xM))
  • [16:44:22] <prpplague> dyniper: depends on what kind of header you populated the rev C4 with. the xm is shipped with a female header
  • [16:44:33] <mrj10> then read back bits 7:0 of 0x48002524
  • [16:44:43] * ceyusa (~vjaquez@155.99.117.91.static.mundo-r.com) Quit (Ping timeout: 245 seconds)
  • [16:44:43] * prpplague checks his notes
  • [16:44:59] <mrj10> i read the enable register (0x48002A84) and get 0x0000_0000 as expected
  • [16:46:14] <mrj10> but writing 0x4 or 0x5 to it locks the chip up and causes it to heat up. haven't gone in further to figure out exactly what it's doing (software livelock in the ARM core, hardware livelock trying to write or read back the register or unmap the memory, etc.) yet
  • [16:49:19] * knudman (43a4cba5@gateway/web/freenode/ip.67.164.203.165) has joined #beagle
  • [16:50:37] <knudman> Anyone know of a good resource for getting DVSDK 4.0 up and running on a beagleboard?
  • [16:50:46] <knudman> C4
  • [16:51:01] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [16:52:18] * eFfeM (~frans@j200125.upc-j.chello.nl) has joined #beagle
  • [16:52:41] <dyniper> Ok, that is no problem for me to change the header on my expansion board
  • [16:53:13] <dyniper> ill try to order one right now, and hope it will work
  • [16:53:26] * ant_work (~andrea@host6-80-static.42-85-b.business.telecomitalia.it) has left #beagle
  • [16:53:33] <dyniper> again, if anyone have a used rev C4 they would be willing to sell, im buying!
  • [16:55:39] * amitk (~amit@122.169.40.134) Quit (Quit: leaving)
  • [17:00:31] <mrj10> prpplague: any luck finding your notes?
  • [17:00:53] <prpplague> mrj10: yea, but they are all for omap4
  • [17:01:14] <mrj10> what is the procedure on omap4?
  • [17:02:58] * ozk_ (~ozk@nat/ti/x-rldpmozbkuiwsmvp) has joined #beagle
  • [17:03:08] <mrj10> my concern now is that maybe the System Control Module (SCM), where the BGAPTS enable bits reside, is shut down/idle?
  • [17:03:17] <mrj10> and the write just goes off into the ether
  • [17:03:36] <mrj10> trying to figure out how to check that
  • [17:03:45] <prpplague> mrj10: http://pastebin.com/Q8DQ9iCb
  • [17:05:21] <mrj10> prpplague: ah, somehow your clocks and such are already in the correct state, or at least this code assumes so
  • [17:05:25] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [17:05:41] <mrj10> unless omap4 automatically does all that when you write the SOC bit
  • [17:06:03] <av500> kblin: ping
  • [17:06:23] * ozk (~ozk@nat/ti/x-vgpoojfohvuhrpxk) Quit (Ping timeout: 240 seconds)
  • [17:10:03] * ozk (~ozk@nat/ti/x-uhmscsfxqgsnctax) has joined #beagle
  • [17:10:03] * ozk_ (~ozk@nat/ti/x-rldpmozbkuiwsmvp) Quit (Remote host closed the connection)
  • [17:16:17] * jpirko (~jirka@ip-89-102-9-136.net.upcbroadband.cz) has joined #beagle
  • [17:17:33] * drakkan1000 (~drakkan@62.123.237.207) Quit (Remote host closed the connection)
  • [17:18:03] * adj (antti@hervanta.com) has joined #beagle
  • [17:24:12] * Guest67520 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Quit: Leaving)
  • [17:24:34] * Mike (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [17:25:00] * Mike is now known as Guest26488
  • [17:25:06] <mrj10> so i know why the "lockup" or whatever was happening, i actually wasnt supposed to change that register
  • [17:25:14] <mrj10> i misread, 0 means ON for those bits (rolleyes)
  • [17:26:47] * huier (~huier@119.6.76.222) Quit (Quit: Leaving)
  • [17:26:58] <mrj10> now just need to figure out why the data bits always read back 0
  • [17:27:47] <mrj10> oh. apparently i'm even denser than i thought
  • [17:27:55] <mrj10> i was writing bit 17, not bit 9
  • [17:28:07] <mrj10> should have been writing 0x200, not 0x20000
  • [17:28:13] <mrj10> thanks for the help
  • [17:28:18] <av500> n
  • [17:28:20] <av500> np
  • [17:32:19] * jayabharath (~jayabhara@nat/ti/x-bqnuuvtnkzgbiwex) has joined #beagle
  • [17:32:30] * rodrigo_golive (c8116f03@gateway/web/freenode/ip.200.17.111.3) Quit (Quit: Page closed)
  • [17:41:33] * knudman (43a4cba5@gateway/web/freenode/ip.67.164.203.165) Quit (Ping timeout: 265 seconds)
  • [17:46:30] * CMoH (~cipi@95.76.71.81) has joined #beagle
  • [17:46:30] * CMoH (~cipi@95.76.71.81) Quit (Changing host)
  • [17:46:30] * CMoH (~cipi@unaffiliated/c-moh) has joined #beagle
  • [17:55:32] * ceyusa (~vjaquez@95.61.238.167) has joined #beagle
  • [17:56:20] <ds2> Hmmm
  • [18:05:38] <Jefro> what's that humming noise?
  • [18:05:59] <av500> the little spinning disc in your sd card
  • [18:06:12] <av500> the one that holds the "cylinders"
  • [18:06:52] <Jefro> what happens if one gets out?
  • [18:07:11] <av500> run
  • [18:07:52] * courville (~courville@archos.rain.fr) Quit (Ping timeout: 272 seconds)
  • [18:21:50] <kblin> av500: pong
  • [18:22:13] <av500> too late
  • [18:22:26] <av500> I wanted to know if jeremy is on irc
  • [18:23:49] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [18:24:49] * gadiyar (~chatzilla@192.163.20.231) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6.12/20101026210630])
  • [18:27:40] * Zygo (startkeylo@startkeylogger.hungrycats.org) Quit (Quit: Coyote finally caught me)
  • [18:27:55] * Zygo (startkeylo@startkeylogger.hungrycats.org) has joined #beagle
  • [18:28:44] * fraz_ (~fraz@12.233.153.4) has joined #beagle
  • [18:28:48] * fraz_ (~fraz@12.233.153.4) has left #beagle
  • [18:29:35] * tharvey (~tharvey@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) Quit (Quit: Leaving)
  • [18:37:01] * tharvey (~tharvey@adsl-76-205-222-173.dsl.snlo01.sbcglobal.net) has joined #beagle
  • [18:38:21] * Zygo (startkeylo@startkeylogger.hungrycats.org) Quit (Quit: Coyote finally caught me)
  • [18:38:26] * Dead1nside (~Dead1nsid@78.86.212.180) has joined #beagle
  • [18:38:32] * Zygo (startkeylo@startkeylogger.hungrycats.org) has joined #beagle
  • [18:39:35] * mor_tycia (~leticia@186.214.45.162) has joined #beagle
  • [18:40:09] <mor_tycia> hi, i'd like to know if someone had problems setting up a lcd 480x272 on 0xdroid
  • [18:40:21] <mor_tycia> mine is on, but it seems to be with a really high refresh rate, so it blinks some times
  • [18:40:31] <av500> then lower it
  • [18:40:43] * jonrp (~Dead1nsid@78.86.212.180) Quit (Ping timeout: 240 seconds)
  • [18:40:57] <mor_tycia> is it a problem with environment variables?
  • [18:41:26] <av500> how did you get this lcd to work?
  • [18:42:39] * Gopal (7376f224@gateway/web/freenode/ip.115.118.242.36) Quit (Quit: Page closed)
  • [18:43:25] <mor_tycia> i inserted the config on /kernel/drivers/video/omap2/displays/Kconfig
  • [18:44:01] <mor_tycia> then i inserted in omap3_beagle_defconfig the lcd specification
  • [18:45:26] <mor_tycia> on Makefile i inserted the line: obj-$(CONFIG_PANEL_SHARP_LQ043T3DX02) += panel-sharp-lq043t3dx02.o
  • [18:46:28] <mor_tycia> and the corresponding file "panel-sharp-lq043t3dx02.c" on the folder /kernel/drivers/video/omap2/displays
  • [18:46:33] <av500> mor_tycia: cat /sys/devices/platform/omapdss/display0/timings
  • [18:46:40] <mor_tycia> is there something wrong?
  • [18:46:55] <mor_tycia> i'm a bit new on this
  • [18:47:07] <av500> mor_tycia: cat /sys/devices/platform/omapdss/display0/timings
  • [18:49:42] * ucasano (~ucasano@host153-182-static.227-95-b.business.telecomitalia.it) Quit (Quit: ucasano)
  • [18:50:59] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) Quit (Quit: Leaving.)
  • [18:51:35] * emeb (~ericb@ip72-223-86-148.ph.ph.cox.net) has joined #beagle
  • [18:51:56] <av500> mor_tycia: and this panel-sharp-lq043t3dx02.c is from where?
  • [18:52:08] <av500> either paste the results of: cat /sys/devices/platform/omapdss/display0/timings
  • [18:52:13] <av500> or pastebin the driver file
  • [18:52:28] <av500> pastebin.com
  • [18:54:03] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Read error: Connection reset by peer)
  • [18:54:10] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [18:55:28] <mor_tycia> the file was made from one of the guy how worked on it
  • [18:55:49] <mor_tycia> guy who worked
  • [18:59:11] <av500> so what is the result of: cat /sys/devices/platform/omapdss/display0/timings
  • [19:00:57] * holmes123 (~holmes123@74.11.100.93) has joined #beagle
  • [19:04:27] * ozk_ (~ozk@nat/ti/x-rgmlkrqzuhflkzyr) has joined #beagle
  • [19:05:04] <mor_tycia> in timings the answer was: 20000,480/2/2/41,272/2/2/10
  • [19:05:16] <mor_tycia> is this so wrong?
  • [19:05:41] * foobaz_ (~administr@roam148-034.ceas.wmich.edu) Quit (Quit: Lost terminal)
  • [19:06:33] * pcacjr (~pcacjr@unaffiliated/pcacjr) Quit (Quit: Lost terminal)
  • [19:06:41] <av500> wow, 133hz
  • [19:07:12] <av500> your guy did not read the data sheet
  • [19:07:23] * ozk (~ozk@nat/ti/x-uhmscsfxqgsnctax) Quit (Ping timeout: 240 seconds)
  • [19:07:41] <mor_tycia> i'm trying to set the 0xdroid initial config
  • [19:08:29] <mor_tycia> only on the driver i can change the frequency?
  • [19:08:38] <mor_tycia> or it is set on the kernel config?
  • [19:08:46] <av500> in panel-sharp-lq043t3dx02.c
  • [19:08:55] <av500> there is a struct with the timings
  • [19:10:58] <av500> hmm
  • [19:11:24] <mor_tycia> yes
  • [19:11:37] * florian (~fuchs@sign-4d094a96.pool.mediaWays.net) has joined #beagle
  • [19:11:37] * florian (~fuchs@sign-4d094a96.pool.mediaWays.net) Quit (Changing host)
  • [19:11:37] * florian (~fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [19:11:59] <mor_tycia> the values are 20000 for .pixel_clock
  • [19:12:03] <av500> yes
  • [19:12:07] <mor_tycia> this number is wrong?
  • [19:12:17] <av500> you can do the math easily
  • [19:12:53] <mor_tycia> can you say how is the formula?
  • [19:13:29] <mor_tycia> i know it is 60Hz
  • [19:13:39] <mor_tycia> and the resolution is 480x272
  • [19:13:51] <av500> yes, but you need to add the sync signal
  • [19:14:07] <av500> H values to 480, V values to the height
  • [19:14:48] <av500> like here: http://www.asgon.net/blog/wp-content/uploads/image/vga_theory.gif
  • [19:16:11] <av500> emeb: a new fpga for you: http://edc.intel.com/Platforms/Atom-E6x5C/
  • [19:16:42] <av500> it has some unused silicon on the north end though....
  • [19:18:14] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) has joined #beagle
  • [19:18:22] <dent_> hi there ...
  • [19:19:31] <dent_> anyone can give a hand with beagle and openembedded and u-boot compiling
  • [19:20:24] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) has left #beagle
  • [19:20:34] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) has joined #beagle
  • [19:20:50] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) Quit (Remote host closed the connection)
  • [19:21:19] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) has joined #beagle
  • [19:21:20] * av500 wants to keep his hand
  • [19:21:56] <dent_> anyone here?
  • [19:21:57] <dent_> :)
  • [19:22:43] <av500> try
  • [19:23:09] <dent_> ok, so i managed to compile a dist with openembedded ...
  • [19:23:26] <dent_> ... but now i would like to add support for SPI3/SPI4 ...
  • [19:23:50] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) has joined #beagle
  • [19:24:19] <dent_> but running even a standard (git) u-boot doesn't start my kernel (it also doesn't list my DRAM correctly)
  • [19:24:38] <dent_> any hints on which version of u-boot i need to use for my C4 beagleboard
  • [19:24:50] <aholler> try 2010.09 or u-boot from validation
  • [19:25:05] <dent_> or any links to working oe recipies
  • [19:26:26] <aholler> [16:16] < koen> jkridner|work:
  • [19:26:26] <aholler> http://gitorious.org/beagleboard-validation/u-boot/commits/koen/beagle-2010.12 works on c3/c4/xM, no orange screen, though
  • [19:26:30] <av500> are there no oe recipies in oe?
  • [19:26:35] <dent_> aholler - with UBOOT_MACHINE = "omap3_beagle_config" ?
  • [19:27:03] <dent_> av500: there are - but u-boot doesn't seem to work correctly on my BB
  • [19:27:31] <av500> and oe has no uboot recipe?
  • [19:27:31] <dent_> aholler: i don't really need the orange screen ;)
  • [19:27:44] <dent_> av500: it has - but it doesn't seem to work
  • [19:27:47] <mor_tycia> on the datasheet the typical clock frequency is 9Mz
  • [19:27:52] <av500> mor_tycia: yep
  • [19:27:55] <dent_> - giving 2009.10 a try ...
  • [19:28:04] <av500> so why is there 20 in the timings?
  • [19:28:06] <av500> :)
  • [19:28:13] <mor_tycia> is this the number i am looking for?
  • [19:28:40] <av500> (480+41+4) * (272+10+2+2) * 60
  • [19:30:19] <mor_tycia> i understand the numbers now
  • [19:30:50] <av500> ok
  • [19:32:49] <mor_tycia> thanks a lot
  • [19:43:55] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) has joined #beagle
  • [19:48:51] * cwillu_at_work (~cwillu@cwillu.com) Quit (Remote host closed the connection)
  • [19:49:30] * cwillu_at_work (~cwillu@cwillu.com) has joined #beagle
  • [19:51:16] * NishanthMenon (~nmenon@nat/ti/x-deqwnbknfdnmnqkr) Quit (Quit: Ex-Chat)
  • [19:54:09] * anr78 (~foo@145.79-161-31.customer.lyse.net) has joined #beagle
  • [20:01:40] * anr78_ (~foo@145.79-161-31.customer.lyse.net) has joined #beagle
  • [20:03:50] * mor_tycia (~leticia@186.214.45.162) Quit (Quit: Ex-Chat)
  • [20:05:02] * anr78 (~foo@145.79-161-31.customer.lyse.net) Quit (Ping timeout: 272 seconds)
  • [20:05:02] * anr78_ is now known as anr78
  • [20:05:29] * IanWiz (~ian@c-98-236-69-69.hsd1.pa.comcast.net) has joined #beagle
  • [20:05:49] <emeb> av500: re atom/fpga - I saw something about that a while back. interesting idea.
  • [20:06:57] <IanWiz> Hello - suffering from my Beagle, or it's LAN adapter, taking down my network connection. Anyone experienced this before?
  • [20:08:12] * courville (~courville@courville.org) has joined #beagle
  • [20:11:01] <av500> emeb: a BB atom addon :)
  • [20:12:36] * knudman (43a4cba5@gateway/web/freenode/ip.67.164.203.165) has joined #beagle
  • [20:14:17] <koen> dent_: following the instructions from http://www.angstrom-distribution.org/building-angstrom will get you a working u-boot
  • [20:16:00] <knudman> Anyone know why I get CMEMK Error: Failed to request_mem_region when trying to load modules for DVSDK 4 c6run-apps test application?
  • [20:16:22] <av500> pastebin
  • [20:21:39] * xhadow (83d80e01@gateway/web/freenode/ip.131.216.14.1) has joined #beagle
  • [20:22:04] <xhadow> hey room
  • [20:22:52] * xhadow (83d80e01@gateway/web/freenode/ip.131.216.14.1) Quit (Client Quit)
  • [20:23:01] <djlewis_> i'm feeling kinda horsey :)
  • [20:23:16] <emeb> av500: a more interesting thing would be an OMAP + FPGA connected via mpmc with plenty of I/O
  • [20:23:20] * Beagle4 (~Beagle4@nat-pool-14-1.net.unlv.edu) has joined #beagle
  • [20:23:37] <Beagle4> hello
  • [20:24:38] <emeb> s/mpmc/gpmc/
  • [20:24:53] * anr78_ (~foo@145.79-161-31.customer.lyse.net) has joined #beagle
  • [20:25:24] * knudman (43a4cba5@gateway/web/freenode/ip.67.164.203.165) Quit (Ping timeout: 265 seconds)
  • [20:25:53] * anr78 (~foo@145.79-161-31.customer.lyse.net) Quit (Ping timeout: 255 seconds)
  • [20:25:53] * anr78_ is now known as anr78
  • [20:26:41] <anr78> what's demanded of the primary partition on the sd card for me to be able to boot from it?
  • [20:27:00] <av500> fat
  • [20:27:06] <av500> and active
  • [20:27:08] <buZz> afaik that depends on the uBoot version you have
  • [20:27:21] <av500> some uboots demand your firstborn
  • [20:27:21] * anr78 tends to be known as tasslehoff, and doesn't know why he's someone else now
  • [20:27:22] * ozk (~ozk@nat/ti/x-rbtsjjalnjhdopek) has joined #beagle
  • [20:27:30] <emeb> fat and active sounds like a contradiction....
  • [20:27:30] * anr78 is now known as tasslehoff
  • [20:27:46] * jurek (~jurek@afcv220.neoplus.adsl.tpnet.pl) has joined #beagle
  • [20:29:10] <tasslehoff> av500: so active fat, and copying MLO and u-boot.bin first is all that's needed?
  • [20:29:38] <djlewis_> in theroy
  • [20:29:51] <tasslehoff> if so, I'm gonna remove sfdisk from my script and replace it by something easier to understand :)
  • [20:29:56] * ozk_ (~ozk@nat/ti/x-rgmlkrqzuhflkzyr) Quit (Ping timeout: 255 seconds)
  • [20:33:29] <dent_> neither u-boot 2010.12 from git nor 2009.06 from oe works for me (both clean that DRAM: 0 Bytes)
  • [20:33:49] <dent_> anyone has an idea?
  • [20:35:32] <mru> well, 1 dram is 3 scruples, each 20 grains
  • [20:35:44] <mru> the question is how many bits there are to a grain
  • [20:36:10] <dent_> mru: well, i wouldn't care, as long as my kernel would boot :)
  • [20:37:22] <mru> and a grain is a kernel, so 1 dram can hold 60 kernels
  • [20:37:36] <mru> running one is usually enough
  • [20:37:49] <mru> so you only need 1/60 dram
  • [20:37:56] <mru> which in integer maths is 0
  • [20:38:03] <mru> so your uboot is right
  • [20:38:09] * naeg_ (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.3)
  • [20:38:25] <sakoman_> dent_: I use the mlo/u-boot from here and they work on my C3 and xM:
  • [20:38:27] <sakoman_> http://feeds.sakoman.com/feeds/images/beagleboard/current/
  • [20:39:04] <dent_> sakoman: the binary works for me too - but i need to enable SPI3/4 .. and recompile :(
  • [20:39:54] * Beagle4 (~Beagle4@nat-pool-14-1.net.unlv.edu) Quit (Quit: Beagle4)
  • [20:42:49] <sakoman_> dent_: well then perhaps your changes broke something :-)
  • [20:43:17] <dent_> sakoman: haven't added any changes ... wanted to check if a vanilla build works ...
  • [20:43:58] * dl9pf_ (~quassel@p5B2136AB.dip.t-dialin.net) has joined #beagle
  • [20:44:19] * dl9pf (~quassel@opensuse/member/dl9pf) Quit (Ping timeout: 240 seconds)
  • [20:46:59] <koen> sakoman_: have you seen mmc failures on ES2.0 silicon with recent uboots?
  • [20:47:48] <koen> or rather, I can only reproduce the timeouts on B6 beagleboards
  • [20:48:25] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [20:51:18] * knudman (43a4cba5@gateway/web/freenode/ip.67.164.203.165) has joined #beagle
  • [20:51:30] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) Quit (Remote host closed the connection)
  • [20:52:14] * CMoH (~cipi@unaffiliated/c-moh) Quit (Remote host closed the connection)
  • [20:52:46] * bgamari (~ben@pool-96-240-211-146.spfdma.east.verizon.net) has joined #beagle
  • [20:54:22] <knudman> Anyone know how to get DVSDK 4 working with the beagleboard?
  • [20:54:28] * djanatan (~jonathan@134.231.190.222) has joined #beagle
  • [20:55:33] <mrj10> knudman: isn't the DVSDK a whole conglomeration of components? which are you having trouble with?
  • [20:56:15] <_av500_> all of them?
  • [20:56:38] <mru> the fact that they're conglomerated?
  • [20:57:38] <knudman> I can't get the DVSDK fs image to work on the beagleboard because it is for the EVM and when I try and use the apps compiled with the dvsdk on my angstrom demo image the kernel versions don't match so the ko modules won't load.
  • [20:58:41] <mrj10> i use openembedded to compile all the DVSDK kernel modules
  • [20:59:03] <knudman> using arago or openembedded directly?
  • [20:59:07] <mrj10> OE directly
  • [20:59:40] <mrj10> i had to patch the angstrom codec versions file to use DVSDK 4.x instead of 3.x, but after i did that it worked fine
  • [20:59:54] <_av500_> codec versions?
  • [20:59:59] <mrj10> i would suggest using angstrom 2008 as the distro rather than 2010, i got my 2010 to work but just barely, and i wouldnt wish the project on anyone
  • [21:00:54] <mrj10> the file is conf/distro/include/angstrom-codec-engine-latest-preferred-versions.inc
  • [21:01:08] <mrj10> angstrom just calls "all that TI crap" codec-engine
  • [21:01:22] <mrj10> well, not quite true, but much of it, including DVSDK
  • [21:01:54] <_av500_> dvsdk is a point in time snapshot of hw and matching sw
  • [21:02:08] * dyniper (84d2d9ad@gateway/web/freenode/ip.132.210.217.173) Quit (Ping timeout: 265 seconds)
  • [21:02:17] <_av500_> isit still mvl5 based? :)
  • [21:02:35] <mrj10> what's mvl5?
  • [21:02:36] * rcranetx (~rcranetx@nat/ti/x-vtubfrahrxcentpi) Quit (Quit: Leaving.)
  • [21:02:58] <_av500_> dont ask :)
  • [21:02:59] <knudman> So did you compile the entire openembedded kernel and fs image or did you compile just the dvsdk binaries?
  • [21:03:15] <knudman> and use the demo image.
  • [21:04:19] <mrj10> you'll need to compile the kernel and its dependencies, and whatever other deps dvsdk has, but you don't have to do the full rootfs
  • [21:04:24] <mrj10> i did, but you don't have to
  • [21:04:50] <sakoman_> koen: no I haven't seen any mmc failures
  • [21:05:41] * rcranetx (~rcranetx@nat/ti/x-jrskuiovxubhcdrm) has joined #beagle
  • [21:05:43] <sakoman_> dent: seems there must be something wrong with your build process then
  • [21:06:24] <knudman> What git did you use? I tried the "git checkout origin/stable/2009 -b stable/2009" but couldn't get it to build
  • [21:06:59] * koen repeats: follow http://www.angstrom-distribution.org/building-angstrom
  • [21:07:10] * kevinsc (~a0214685@nat/ti/x-szpjtfxzgkhxvsxe) has joined #beagle
  • [21:09:41] * gregoiregentil (~gregoire@c-69-181-223-70.hsd1.ca.comcast.net) has joined #beagle
  • [21:10:33] * gregoiregentil (~gregoire@c-69-181-223-70.hsd1.ca.comcast.net) has left #beagle
  • [21:10:36] <_av500_> koen: say again?
  • [21:12:35] <knudman> Ok I was following http://elinux.org/ECE597_Installing_The_%C3%83%E2%80%A6ngstr%C3%83%C2%B6m_Distribution
  • [21:13:26] <knudman> I'll try that and see if I can get it to build. One question do the building angstrom steps build the latest or a snapshot of a stable release?
  • [21:13:30] <ds2> all the popping and not a single kernel in sight
  • [21:13:32] <koen> yeah, always trust random wikis over upstream
  • [21:14:10] <knudman> It seemed to be the most complete instructions upstreams tend to assume you understand a lot
  • [21:14:13] <ds2> yes, look at high reliable random OE instructions are... everyone is building with them!
  • [21:14:19] <kblin> _av500_: ok, sorry for the delay, I'm at a conference, so I only have sporadic internet access
  • [21:14:36] <_av500_> kblin: np, we got hold of him
  • [21:14:44] <emeb> such a lot of irony today
  • [21:15:15] <mrj10> knudman: i believe those scripts will build you angstrom 2008 by default. this means frozen, known-good versions of many of the important things, like toolchain, kernel, libc, binutils, and the latest version with a recipe of any package for which the preferred version is unspecified
  • [21:15:39] <kblin> _av500_: if you're talking about jra, email usually works best, but you obviously managed in any case
  • [21:15:46] <_av500_> yes
  • [21:15:54] <knudman> Sweet I will give that a shot. Thanks all
  • [21:16:45] * Guest26488 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) Quit (Ping timeout: 245 seconds)
  • [21:17:39] * ds2 drop kicks auto.conf
  • [21:19:33] * mrj10 drop kicks autoconf
  • [21:19:49] <mrj10> and any of its autofriends
  • [21:19:52] <ds2> autoconf is downright evil
  • [21:19:59] <ds2> auto.conf just has issues, AFAICT
  • [21:21:27] * emeb doesn't really understand auto*
  • [21:21:46] <ds2> auto.conf is an OEism before anyones too far down the road
  • [21:22:27] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Remote host closed the connection)
  • [21:23:18] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [21:27:23] <kblin> ds2: oh, I thought it had the settings for your car 0:)
  • [21:28:21] * tasslehoff (~foo@145.79-161-31.customer.lyse.net) Quit (Quit: tasslehoff)
  • [21:29:30] * slchen (~slchen@58-115-124-55.cable.dynamic.giga.net.tw) Quit (Quit: slchen)
  • [21:40:56] * aholler (~aholler@p57B201DC.dip0.t-ipconnect.de) Quit (Quit: reboot)
  • [21:42:49] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) has joined #beagle
  • [21:44:33] <djlewis_> someone call for an autoconference?
  • [21:44:48] <djlewis_> need more caffiene
  • [21:45:34] <cwillu> nah, you just need autonap
  • [21:45:51] <cwillu> also, why did I get honey with my chicken nuggets?
  • [21:46:43] * cwillu goes hunting around for some mustard
  • [21:47:58] * dent_ still failes with producing some working u-boot compilation for C4
  • [21:48:18] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.3)
  • [21:49:04] <cwillu> dent_, would you like to rsync my build server?
  • [21:49:32] <dent_> cwillu: would be great
  • [21:49:33] <cwillu> now with extra honey!
  • [21:50:06] * Xerion_ (~xerion@54194281.cm-5-2b.dynamic.ziggo.nl) has joined #beagle
  • [21:50:15] <cwillu> dent_, what board are you on?
  • [21:50:21] <dent_> BB C4
  • [21:50:49] <djlewis_> mmMmm, mix honey and mustard
  • [21:50:58] <cwillu> djlewis, I don't have an mustard :(
  • [21:51:02] <cwillu> this was supposed to be pre-mixed
  • [21:51:11] * ceyusa (~vjaquez@95.61.238.167) Quit (Ping timeout: 245 seconds)
  • [21:51:16] <cwillu> dent_, and the stock uboot isn't working for you?
  • [21:51:21] <dent_> cwillu: i can also live with a binary, as long as SPI3 and SPI4 are enabled ;)
  • [21:51:30] <djlewis_> I have some, djlewis squeezes honey mustard into ethernet cable
  • [21:51:36] <dent_> stock uboot is working ... that's what drives me nuts
  • [21:51:55] <cwillu> netcat -l 5000 > /dev/honey
  • [21:52:05] <cwillu> ENOMUSTARD :(
  • [21:52:15] <cwillu> dent_, have you built a stock uboot yet?
  • [21:52:21] <cwillu> i.e., without any additional patches
  • [21:52:22] <dent_> tried
  • [21:52:23] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  • [21:52:42] <dent_> tried all oe supported ones ...
  • [21:52:50] <dent_> plus the ones from git
  • [21:52:56] <dent_> and koen's branch
  • [21:53:01] <cwillu> where does it fail?
  • [21:53:11] <dent_> build and boot of uboot works
  • [21:53:13] <cwillu> and did you try adding mustard?
  • [21:53:29] <dent_> but it doesn't account for RAM
  • [21:53:35] <dent_> - says 0 Bytes
  • [21:53:43] <dent_> plus the kernel loads, but doesn't start
  • [21:53:52] <cwillu> <dent_> but it doesn't account for RAM
  • [21:53:52] <cwillu> <dent_> - says 0 Byte
  • [21:53:56] <cwillu> sorry, don't understand
  • [21:53:58] * Xerion (~xerion@54194281.cm-5-2b.dynamic.ziggo.nl) Quit (Ping timeout: 272 seconds)
  • [21:53:58] * Xerion_ is now known as Xerion
  • [21:54:02] <dent_> - a wild guess would be that this has something to do with the RAM :)
  • [21:54:26] <cwillu> dent_, stock uboot works, it's probably not your ram :p
  • [21:54:27] <dent_> cwillu: give me a sec
  • [21:54:32] <cwillu> are you cross-compiling?
  • [21:54:40] <dent_> cwillu: yes
  • [21:54:50] <cwillu> via oe? what distro?
  • [21:54:56] <dent_> the kernel i'm using is also compiled with the same toolset
  • [21:55:10] <cwillu> have you tried attaching a rocket to your broomstick?
  • [21:55:41] <dent_> wow
  • [21:55:53] <dent_> RAM Configuration:
  • [21:55:54] <dent_> Bank #0: fd0000ff 4 GiB
  • [21:55:54] <dent_> Bank #1: 7f2100ff 4 GiB
  • [21:55:58] <cwillu> haven't slept in a while, give me a greak :p
  • [21:56:02] <cwillu> break
  • [21:56:21] <dent_> :-P
  • [21:56:21] <cwillu> that looks... bogus
  • [21:56:25] <dent_> right
  • [21:56:34] <dent_> usually it gives me 0 bytes ...
  • [21:56:38] <cwillu> but that's not on the stock uboot, right?
  • [21:56:44] <mru> omap3 can address 1GB physical ram
  • [21:56:47] <dent_> that's the one from git
  • [21:57:38] * peabody124 (~peabody12@128.249.96.21) has joined #beagle
  • [21:57:48] <dent_> this is the stock:
  • [21:57:51] <dent_> U-Boot 2010.03 (Aug 06 2010 - 11:28:56)
  • [21:57:51] <dent_> OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max clock-720Mhz
  • [21:57:52] <dent_> OMAP3 Beagle board + LPDDR/NAND
  • [21:57:52] <dent_> I2C: ready
  • [21:57:52] <dent_> DRAM: 256 MB
  • [21:57:52] <dent_> NAND: 256 MiB
  • [21:57:53] <dent_> In: serial
  • [21:57:53] <dent_> Out: serial
  • [21:57:53] <dent_> Err: serial
  • [21:58:06] <cwillu> okay, so it's obviously not being built sanely
  • [21:58:07] * Guest26488 (~Crazymik3@CPE00259c601d5d-CM00080da43848.cpe.net.cable.rogers.com) has joined #beagle
  • [21:58:19] <dent_> right
  • [21:58:28] <cwillu> so... stop being insane
  • [21:58:35] <cwillu> how are you configuring uboot?
  • [21:58:37] <dent_> do you have a tar somewhere which _should_ work?
  • [21:59:12] <dent_> make CROSS_COMPILE=arm-oe-linux-gnueabi- omap3_beagle_config
  • [21:59:28] <cwillu> for reference, this is my boot: http://pastebin.com/Jrq0s3Pf
  • [21:59:50] <cwillu> (console is on tty1, so there's nothing from the kernel there, but it boots fine)
  • [22:00:49] <dent_> looks fine
  • [22:01:19] <dent_> mine stops after the lonely OK, just before "Starting kernel ..."
  • [22:02:54] * ozk_ (~ozk@nat/ti/x-ybqondxcqgbziptu) has joined #beagle
  • [22:04:44] * ozk (~ozk@nat/ti/x-rbtsjjalnjhdopek) Quit (Ping timeout: 272 seconds)
  • [22:05:50] * pH5 (~ph5@e178193109.adsl.alicedsl.de) Quit (Quit: bye)
  • [22:05:57] * aholler (~aholler@p57B201DC.dip0.t-ipconnect.de) has joined #beagle
  • [22:12:38] * courville (~courville@courville.org) Quit (Ping timeout: 276 seconds)
  • [22:19:51] <koen> dent_: and you are sure you followed the instructions at http://www.angstrom-distribution.org/building-angstrom
  • [22:19:54] <koen> ?
  • [22:20:48] <dent_> koen: something like that, yes
  • [22:20:56] <koen> so you didn't
  • [22:21:04] <dent_> koen: no, i didn't
  • [22:21:14] <dent_> i build my own kernel and my own distribution
  • [22:21:17] <koen> there's your problem
  • [22:21:18] <dent_> all work
  • [22:21:42] <dent_> s/all work/almost everything works/
  • [22:21:47] <dent_> - beside u-boot
  • [22:22:56] <dent_> koen: can you give me a pointer to sources which should work with C4?
  • [22:24:57] * rcranetx (~rcranetx@nat/ti/x-jrskuiovxubhcdrm) Quit (Quit: Leaving.)
  • [22:26:59] * jayabharath (~jayabhara@nat/ti/x-bqnuuvtnkzgbiwex) Quit (Remote host closed the connection)
  • [22:28:37] * RobotGuy (~Dale@c-24-21-60-36.hsd1.or.comcast.net) has joined #beagle
  • [22:29:46] * jrmuizel_ (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [22:32:40] * BThompson (~a0193480@nat/ti/x-tcklroewwdntniti) Quit (Remote host closed the connection)
  • [22:32:47] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Ping timeout: 255 seconds)
  • [22:32:47] * jrmuizel_ is now known as jrmuizel
  • [22:35:15] * djanatan (~jonathan@134.231.190.222) Quit (Ping timeout: 265 seconds)
  • [22:35:17] * ceyusa (~vjaquez@95.61.238.167) has joined #beagle
  • [22:46:59] * jayabharath (~jayabhara@nat/ti/x-qqrrljwjuefobckp) has joined #beagle
  • [22:47:36] <koen> follow the instructions at http://www.angstrom-distribution.org/building-angstrom
  • [22:49:22] <dent_> :)
  • [22:49:26] <dent_> ok, found the problem
  • [22:49:57] <dent_> gcc-4.5 seems to cause troubles
  • [22:50:25] <mru> gcc 4.5 works fine here
  • [22:50:28] * djanatan (~jonathan@benson-hall-cag-208-50.gallaudet.edu) has joined #beagle
  • [22:50:30] <dent_> gcc-4.4 works find for me
  • [22:50:38] <mru> don't believe everything koen tells you
  • [22:50:41] <dent_> s/find/fine/
  • [22:50:46] <mru> yes
  • [22:51:04] <dent_> mru: i tried it with both gcc's
  • [22:51:30] <dent_> the binary produced with 4.5 doesn't produce the expected output - 4.4 does
  • [22:51:53] <mru> I've never had such problems
  • [22:52:07] <mru> of course all gcc versions have bugs
  • [22:52:16] <aholler> i had
  • [22:52:21] <mru> but linux builds fine with gcc 4.5
  • [22:52:29] <mru> as does u-boot
  • [22:52:39] <dent_> mru: i know - my kernel humms happily
  • [22:52:45] <dent_> but uboot doesn't
  • [22:52:53] <mru> the you're using the wrong u-boot
  • [22:52:55] <koen> there's a bug in some versions of uboot with a delay loop where gcc 4.5 can trip it up
  • [22:53:08] <mru> that's u-boot's fault, not gcc's
  • [22:53:17] <mru> u-boot is full of dubious code
  • [22:53:36] <dent_> :)
  • [22:54:42] <aholler> i have a gcc 4.5.1 which currently segfaults when trying to compile 2.6.36.x
  • [22:54:45] <_av500_> it was written for 2.95
  • [22:55:21] <dent_> well, i'll stick with 4.4 for now ...
  • [22:55:37] <mru> if you don't want to use 4.5, at least use 4.3
  • [22:55:40] <dent_> i don't have the time to look over u-boot
  • [22:55:44] <mru> 4.4 is the worst version ever
  • [22:56:14] <dent_> mru: i could tell oe ...
  • [22:56:34] <dent_> mru: just used 4.4, 'cause ther's an apt for that ;)
  • [22:56:49] * eFfeM (~frans@j200125.upc-j.chello.nl) Quit (Quit: Leaving.)
  • [22:57:52] <dent_> ah, that's why angstrom works - they are using 4.3.3
  • [22:58:53] <_av500_> compiler versions are overrated
  • [22:59:07] <dent_> _av500_: most of the time yes
  • [22:59:32] <aholler> not for arm
  • [22:59:39] <mru> just remember, gcc major.minor should have odd parity
  • [22:59:40] <aholler> at least currently
  • [23:02:48] * jconnolly is now known as jconnolly|away
  • [23:03:27] * ozk__ (~ozk@nat/ti/x-rhommwcuervwdpxe) has joined #beagle
  • [23:03:52] * ozk_ (~ozk@nat/ti/x-ybqondxcqgbziptu) Quit (Remote host closed the connection)
  • [23:08:06] * heathkid (~heathkid2@108.98.50.63) has joined #beagle
  • [23:08:13] * heathkid (~heathkid2@108.98.50.63) has left #beagle
  • [23:09:07] * kevinsc (~a0214685@nat/ti/x-szpjtfxzgkhxvsxe) Quit (Quit: Leaving.)
  • [23:11:01] <IanWiz> I'm having issues with my Beagleboard killing my network connection, is there previous report of this?
  • [23:11:20] <mru> yes, you mentioned it earlier today
  • [23:12:26] <IanWiz> :) sorry to repeat, it makes for a not work conducive connection.
  • [23:14:38] <djlewis_> IanWiz: does it jamn the network with packets? Duplicate a IP already existing?
  • [23:15:48] <IanWiz> I think its flooding with packets, IPs are not duplicated. active IP connections jump from 100, to over 1000
  • [23:16:10] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [23:17:31] <djlewis_> first i've heard of the problem since I joined a couple years back.
  • [23:18:59] * GPSFan (~kenm@64.92.145.112) Quit (Remote host closed the connection)
  • [23:21:14] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [23:22:32] <aholler> use netstat to finde the source of your connections
  • [23:22:52] <IanWiz> Looks like the other connections on the router are mimicking the transmit LED on the trendnet adapter.
  • [23:23:11] <muriani> anyone have issues with the ubuntu net installer working on beagle with serial user I/O?
  • [23:23:38] <muriani> I get all the way until it downloads the release file, and then it just goes black after that
  • [23:23:39] * ceyusa (~vjaquez@95.61.238.167) Quit (Quit: leaving)
  • [23:23:43] <muriani> oh, never mind
  • [23:23:50] <muriani> just had to wait a bit
  • [23:23:51] <muriani> lol
  • [23:24:31] <muriani> gonna be checking out linux-hosted AROS :)
  • [23:26:22] <aholler> IanWiz: connections and packets usually don't appear without a reason. use tcpdump/wireshark/netstat to check what happens
  • [23:30:45] <djlewis_> what is that ape??? linux prog?
  • [23:31:44] <muriani> ape?
  • [23:31:48] <djlewis_> i think i have the wrong name
  • [23:32:33] <djlewis_> etherape
  • [23:32:45] <muriani> ah
  • [23:33:05] * rcranetx (~rcranetx@nat/ti/x-fmpmoxrdzidqhfyh) has joined #beagle
  • [23:33:41] <djlewis_> heading home, later.
  • [23:34:21] * djlewis_ (~djlewis@adsl-65-64-30-13.dsl.ltrkar.swbell.net) Quit (Quit: Leaving.)
  • [23:37:04] * dent_ (~dent@85-127-151-203.dynamic.xdsl-line.inode.at) Quit (Quit: dent_)
  • [23:42:49] * jayabharath (~jayabhara@nat/ti/x-qqrrljwjuefobckp) Quit (Ping timeout: 250 seconds)
  • [23:43:24] * IanWiz (~ian@c-98-236-69-69.hsd1.pa.comcast.net) Quit (Quit: Leaving)
  • [23:59:53] * Brian_Leipprandt (~Brian@rrcs-24-227-222-71.sw.biz.rr.com) has joined #beagle