• [00:00:37] * BThompson (~a0193480@nat/ti/x-eyeyiqjjsxzavafu) has joined #beagle
  • [00:00:53] <ds2> is there a difference?
  • [00:01:21] <JDuke128> hmm , i can do mediator by just using usb hub ??
  • [00:01:32] <JDuke128> that listens 1 port of keyboard
  • [00:01:42] <JDuke128> and other one connected to pc
  • [00:01:48] <JDuke128> keyboard.
  • [00:01:53] <ds2> No.
  • [00:01:57] <ds2> see USB spec.
  • [00:02:08] <JDuke128> i need ossilator ?
  • [00:02:14] <JDuke128> 1.5 mhz ?
  • [00:02:16] <ds2> wtf is a ossilator?
  • [00:02:57] <JDuke128> oscillator
  • [00:02:59] <JDuke128> sry
  • [00:04:55] <brokie> @Jduke128: http://www.circuitsathome.com/mcu/usb/usb-isolator
  • [00:05:08] <JDuke128> i just need beagleboard usb input & output that sniffs & do operation
  • [00:05:09] <JDuke128> ok
  • [00:06:03] * _roger_1 (~a0740758@nat/ti/x-yrgeqiukldbgegpn) Quit (Ping timeout: 258 seconds)
  • [00:06:22] * XorA (~XorA@www.xora.org.uk) has left #beagle
  • [00:06:58] <JDuke128> its called usb-isolator hmm
  • [00:07:26] * brijesh (~brijesh@nat/ti/x-zyaodmjgyoeigfzm) Quit (Ping timeout: 240 seconds)
  • [00:09:48] <JDuke128> well , i ve looked usb-isolator , its not explaining how to connect it to ? rs232 or usb or ...
  • [00:10:30] <ds2> Oh... no
  • [00:10:43] <ds2> it needs to be an active device if you want to do any mods
  • [00:10:43] * j_ack (~j_ack@p57A421B5.dip0.t-ipconnect.de) Quit (Quit: Verlassend)
  • [00:10:58] <ds2> you can potentially log if you are careful with other things but it would still have to be active
  • [00:11:16] * ant__ (~andrea@host1-50-dynamic.5-87-r.retail.telecomitalia.it) Quit (Quit: Leaving)
  • [00:13:19] <JDuke128> i didnt understand how to connect this device to beagleboard as mitm , usb isolator or sniffer.... http://www.circuitsathome.com/products-page
  • [00:13:57] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [00:14:43] * DanaG (~dana@pcp057515pcs.wireless.calpoly.edu) has joined #beagle
  • [00:16:34] <ds2> the BB has both a host and a device
  • [00:17:34] <JDuke128> ds2 , you mean no need for any extra device to sniff other usb cables ?
  • [00:17:51] <ds2> yes
  • [00:18:45] <JDuke128> ds2 , but beagleboard only has 1 usb interface ?
  • [00:19:06] * parapete (~pete@host81-152-102-132.range81-152.btcentralplus.com) Quit (Quit: /kick evilpaul)
  • [00:19:58] * alecrim (~alecrim@189.2.128.130) Quit (Remote host closed the connection)
  • [00:20:10] <JDuke128> ds2 , beagleboard has only 1 usb input , no output
  • [00:21:03] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [00:21:41] <ds2> the beagle board (RevC or newer) has 2 USB interfaces.
  • [00:22:05] <ds2> more specifically, 2 FUNCTIONAL USB interfaces; RevB's had 2 also but only one was functional.
  • [00:22:46] * DanaG (~dana@pcp057515pcs.wireless.calpoly.edu) Quit (Ping timeout: 240 seconds)
  • [00:22:52] <JDuke128> ds2 , i ve RevC but there is only 1 usb and its only input other is usb otg its input too , there is no usb out ?
  • [00:23:51] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [00:24:58] * DanaG (~dana@pcp057515pcs.wireless.calpoly.edu) has joined #beagle
  • [00:26:44] <ds2> please go look up what you just said
  • [00:29:49] * ddompe_ (~ddompe@200.122.155.113) has joined #beagle
  • [00:30:02] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [00:33:09] * ddompe (~ddompe@200.122.155.113) Quit (Ping timeout: 240 seconds)
  • [00:34:06] * ddompe_ (~ddompe@200.122.155.113) Quit (Ping timeout: 240 seconds)
  • [00:37:46] * DanaG (~dana@pcp057515pcs.wireless.calpoly.edu) Quit (Read error: Connection reset by peer)
  • [00:43:39] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) Quit (Quit: Leaving.)
  • [00:45:23] * samway (~samway@76.84.51.66) has joined #beagle
  • [00:45:54] * robclark (~robclark@nat/ti/x-rchoglhzgccxotev) Quit (Ping timeout: 248 seconds)
  • [00:46:38] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) has joined #beagle
  • [00:47:42] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) Quit (Client Quit)
  • [00:51:35] * BThompson (~a0193480@nat/ti/x-eyeyiqjjsxzavafu) Quit (Quit: Leaving.)
  • [00:54:14] * Sept (~bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: Connection reset by peer)
  • [00:54:20] * Sept (~bakljg@c-98-240-226-129.hsd1.mn.comcast.net) has joined #beagle
  • [00:55:08] * brokie (~none@2-248.35-65.tampabay.res.rr.com) Quit ()
  • [00:58:57] * JDuke128 (~51d6168a@gateway/web/freenode/x-fbbvckufsrgtjrzo) Quit (Quit: Page closed)
  • [01:03:04] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) has joined #beagle
  • [01:07:34] * tdh2002 (~tt@58.63.4.240) has joined #beagle
  • [01:07:38] * tdh2002 (~tt@58.63.4.240) has left #beagle
  • [01:13:06] * robclark (~robclark@nat/ti/x-jatwbhrtjbpfqpdn) has joined #beagle
  • [01:19:22] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [01:21:48] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [01:23:40] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [01:23:45] * hlide (~chaton@vig91-4-82-247-134-92.fbx.proxad.net) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.5.8/20100202165920])
  • [01:24:00] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Client Quit)
  • [01:35:15] * samway (~samway@76.84.51.66) Quit (Quit: samway)
  • [01:35:40] * robtow (~rob@dsl092-218-034.sfo2.dsl.speakeasy.net) Quit (Quit: Leaving.)
  • [01:37:00] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [01:38:52] * prpplague is now known as prpplague_afk
  • [01:43:19] * Zoxc (~zoxc@ti0128a340-dhcp0330.bb.online.no) Quit ()
  • [01:43:37] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [01:45:23] * jeremychang (~jeremycha@61.57.131.211) has joined #beagle
  • [01:45:53] * Openfree` (~Openfreer@116.228.88.98) has joined #beagle
  • [01:46:11] * Openfree` (~Openfreer@116.228.88.98) Quit (Read error: Connection reset by peer)
  • [01:46:28] * Openfree` (~Openfreer@116.228.88.98) has joined #beagle
  • [01:48:39] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [01:54:08] * ddompe (~ddompe@ip221-27-10-190.ct.co.cr) has joined #beagle
  • [01:56:23] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [01:57:14] * samway (~samway@cpe-76-84-51-66.neb.res.rr.com) has joined #beagle
  • [01:59:34] * samway (~samway@cpe-76-84-51-66.neb.res.rr.com) Quit (Client Quit)
  • [02:02:17] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [02:02:26] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) has joined #beagle
  • [02:02:52] * outofwhack (~76d07abd@gateway/web/freenode/x-crtbxlpsscazqjrb) has joined #beagle
  • [02:04:13] <outofwhack> can a beagleboard directly drive small relays so that I may turn on/off 3 battery torches
  • [02:04:45] * alancam_ (~a-campbel@nat/ti/x-tghdlsnohxgyjgnt) has joined #beagle
  • [02:06:27] <bgamari> outofwhack: Sure
  • [02:06:30] <bgamari> No directly per se
  • [02:06:42] <bgamari> but a bjt will do
  • [02:07:08] * alancam (~a-campbel@nat/ti/x-bfhlfhmtvenvtwcv) Quit (Ping timeout: 246 seconds)
  • [02:07:13] <outofwhack> what is a bjt?
  • [02:07:53] <mru> bipolar junction transistor
  • [02:07:58] * samway (~samway@76.84.51.66) has joined #beagle
  • [02:09:14] <outofwhack> ok great, so which connections on the beagleboard can drive a discrete transistor?
  • [02:09:22] * alancam_ (~a-campbel@nat/ti/x-tghdlsnohxgyjgnt) Quit (Ping timeout: 264 seconds)
  • [02:09:43] <mru> there should be some GPIO pins
  • [02:11:10] <outofwhack> can i just download a c compiler for angstrom and write some code to toggle a gpio pin?
  • [02:11:43] <mru> you can do it even from a shell
  • [02:12:23] <bgamari> outofwhack: as mru said, gpio pins can be exposed in /sys
  • [02:14:33] <outofwhack> Thanks! I havent had any luck trying to find info on the internet to explain how to do this. Where should I be looking?
  • [02:14:45] <mru> this is the internet...
  • [02:15:02] <bgamari> outofwhack: http://www.google.com/search?sourceid=chrome&ie=UTF-8&q=linux+gpio
  • [02:15:26] <bgamari> Not sure what you were looking for, but it's kinda tough to miss
  • [02:16:45] * samway (~samway@76.84.51.66) Quit (Quit: samway)
  • [02:18:10] <djlewis1> howdy :)
  • [02:18:37] <bgamari> hey
  • [02:19:12] <outofwhack> bgamari,mru: thanks I am beginning to find useful pages now that I have the keyword gpio
  • [02:20:50] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) Quit (Quit: This computer has gone to sleep)
  • [02:21:00] <bgamari> glad to help
  • [02:21:27] <ds2> http://blog.makezine.com/archive/2009/02/blinking_leds_with_the_beagle_board.html
  • [02:21:34] <ds2> with examples
  • [02:27:16] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [02:29:00] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 268 seconds)
  • [02:34:31] * rcranetx (~rcranetx@nat/ti/x-qwpdmifpvpvyhpjs) Quit (Quit: Leaving.)
  • [02:39:56] * ddompe (~ddompe@ip221-27-10-190.ct.co.cr) Quit (Quit: ddompe)
  • [02:41:30] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [02:50:33] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [03:04:22] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Ping timeout: 276 seconds)
  • [03:21:36] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) has joined #beagle
  • [03:24:18] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [03:27:12] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) Quit (Quit: This computer has gone to sleep)
  • [03:35:14] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [03:37:09] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 245 seconds)
  • [03:39:35] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [03:42:25] <kerute> quick and newby question... is it possible to have a console using the usb or do i need the serial connexion ?
  • [03:44:31] <thurbad> yes, but you need to modify the environment variables
  • [03:45:05] <wmat> kerute: see here http://elinux.org/BeagleBoardBeginners#Serial_connection
  • [03:45:48] <thurbad> without a serial cable you're probably going to need to make a boot.scr file to set the variables on the boot partition of an SD card
  • [03:46:23] <wmat> kerute: change the serial device to /dev/ttyUSB1
  • [03:50:40] * mrc3 (~ddiaz@122.181.11.126) Quit (Quit: Leaving)
  • [03:51:56] * virals (~viral@122.167.112.164) Quit (Quit: Leaving.)
  • [03:52:30] * bigcren (~bigcren@222.131.191.7) has joined #beagle
  • [03:53:40] * outofwhack (~76d07abd@gateway/web/freenode/x-crtbxlpsscazqjrb) Quit (Ping timeout: 252 seconds)
  • [04:00:51] * cody (~cody@dslb-084-056-093-021.pools.arcor-ip.net) has joined #beagle
  • [04:04:28] * cody__ (~cody@dslb-084-056-108-237.pools.arcor-ip.net) Quit (Ping timeout: 265 seconds)
  • [04:06:59] <kerute> (thanks for your answers
  • [04:09:58] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) Quit (Quit: Leaving)
  • [04:18:20] * ZeZu (~null@c-69-245-229-8.hsd1.in.comcast.net) has joined #beagle
  • [04:19:10] * alancam (~a-campbel@nat/ti/x-aubkkdqdiqxvzirr) has joined #beagle
  • [04:22:58] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) Quit (Quit: Leaving)
  • [04:23:26] * tlab_ (~travis@c-69-243-187-136.hsd1.in.comcast.net) Quit (Quit: Ex-Chat)
  • [04:24:28] * ZeZu (~null@c-69-245-229-8.hsd1.in.comcast.net) Quit (Read error: Connection reset by peer)
  • [04:26:35] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) has joined #beagle
  • [04:27:44] * Brokie (~default@2-248.35-65.tampabay.res.rr.com) has joined #beagle
  • [04:28:00] <Brokie> anyone have X-loader 1.4.1 ift file?
  • [04:28:23] <Brokie> 1.4.2 locks up me beagle clone
  • [04:35:08] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) Quit (Quit: ppotera)
  • [04:37:03] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [04:37:46] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 240 seconds)
  • [04:38:10] * alancam (~a-campbel@nat/ti/x-aubkkdqdiqxvzirr) Quit (Ping timeout: 264 seconds)
  • [04:40:14] * lilly (~744a7969@gateway/web/freenode/x-fbqhbnrmzvaqatzx) has joined #beagle
  • [04:40:41] <Brokie> heh
  • [04:40:43] * djlewis1 (~djlewis@75.15.67.125) Quit (Ping timeout: 265 seconds)
  • [04:41:05] <lilly> how to setup dvi mode for beagle board
  • [04:41:17] <lilly> my default mode set as omapfb.mode=dvi:1280x720MR-32@60
  • [04:41:43] <lilly> i need 1920x1080, is it possible ?
  • [04:41:53] * virals (~Viral_Sac@59.97.0.74) has joined #beagle
  • [04:42:45] <DanaG> lilly: likely not; I didn't manage to get it to work with 1680x1050, even.
  • [04:42:55] <DanaG> I believe there's some hardware limitation there.
  • [04:44:02] <lilly> what is the max resolution we can set
  • [04:44:27] <DanaG> eh, I'm not sure on that.
  • [04:44:34] <DanaG> It's also a bummer that fbset doesn't seem to work, either.
  • [04:44:55] <lilly> ok
  • [04:46:06] <Brokie> for 1080, you can do progressive 1080, with omapfb.mode=dvi:1080p60
  • [04:46:14] * GPSFan (~kenm@64.92.145.112) Quit (Quit: Leaving)
  • [04:46:47] <Brokie> can also do 720p with omapfb.mode=dvi:720p60
  • [04:47:14] <Brokie> if you are in europe, you can do 1080p50 or 720p50
  • [04:47:26] <Brokie> (for pal of course)
  • [04:48:56] <Brokie> using MR-32, would need a vram size of 12M, which is why you cannot use the above settings... " omapfb.mode=dvi:1280x720MR-32@60"
  • [04:51:40] <lilly> Brokie : let me try 1080p60
  • [04:53:39] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) Quit (Quit: This computer has gone to sleep)
  • [04:55:26] <Brokie> you must have a 1080p capable TV
  • [04:55:41] <mru> not at all
  • [04:55:53] <mru> for 1080 modes obviously
  • [04:55:58] <mru> not for the others
  • [04:56:01] <Brokie> right
  • [04:56:12] <Brokie> I was referring to the fact he was trying the 1080p mode
  • [04:56:15] <Brokie> :)
  • [04:56:16] * mru isn't reading everything
  • [04:56:19] <mru> :-)
  • [04:56:24] <Brokie> hehe
  • [04:56:35] <mru> maybe I should go and sleep instead, it's 5am
  • [04:56:41] <Brokie> mru, do you have the 1.4.1 x-loader?
  • [04:56:46] <mru> afraid not
  • [04:57:06] <Brokie> my beagle clone wont boot with the 1.4.2, but will with 1.4.1
  • [04:57:09] <Brokie> dunno why
  • [04:57:11] <Brokie> :(
  • [04:57:19] <mru> which clone?
  • [04:57:24] <Brokie> kwikbyte
  • [04:57:40] <Brokie> i wanna smash it against the wall
  • [04:57:46] * NishanthMenon (~nmenon@nat/ti/x-gtubgxufemuobfko) Quit (Quit: Ex-Chat)
  • [04:57:53] <mru> that might void the warranty
  • [04:57:57] <Brokie> perhaps
  • [04:58:00] <mru> of the wall
  • [04:58:09] <Brokie> but I have better luck with the 3530EVM
  • [04:58:28] <Brokie> meh... house built in 1968... warranty far over
  • [04:58:30] <ds2> Brokie: do you have the right RAM settings?
  • [04:58:42] <Brokie> ram settings for?
  • [04:58:48] <ds2> the biard
  • [04:58:50] <ds2> board
  • [04:59:00] <Brokie> the biard has 256 / 512
  • [04:59:13] <ds2> yes, I am familiar with the KBOC
  • [04:59:21] <ds2> but is your x-loader familar with it?
  • [04:59:21] <Brokie> me too
  • [04:59:24] <Brokie> no
  • [04:59:29] <Brokie> but 1.4.1 is...
  • [04:59:40] <ds2> then... :D
  • [04:59:46] <Brokie> and all atempts to compile me own results in same thing
  • [04:59:55] <Brokie> brickville
  • [05:00:27] <ds2> why do you need to change x-loader anyways?
  • [05:00:33] <Brokie> can ya hep a noob out?
  • [05:00:49] <Brokie> cuz no one can pass me an 1.4.1 ift
  • [05:01:09] <ds2> get it from the vendor
  • [05:01:15] <Brokie> ya
  • [05:01:17] <ds2> IIRC, you can download it
  • [05:01:30] <Brokie> emailing them is like talking to 5yo's with crack candy
  • [05:01:40] <ds2> HE HE HE HE
  • [05:01:47] * jonmasters (~jcm@dallas.jonmasters.org) Quit (Read error: Operation timed out)
  • [05:02:12] <Brokie> they dont READ the entire email, they respond with nonsensical gibberish, and act, well, like crackheads
  • [05:02:22] <Brokie> 5yo crackheads
  • [05:02:43] <Brokie> its like arguing with a doughnut
  • [05:02:59] <lilly> when i set omapfb.mode with 1080p and reboot system
  • [05:02:59] <Brokie> funny for a minute, but overall, useless
  • [05:03:07] <ds2> sounds like you had more productive conversations with brickwalls :D
  • [05:03:12] <Brokie> yep
  • [05:03:13] <lilly> the setting of fb0 and fb1 are like this
  • [05:03:24] <lilly> for fb0 it set for 640x 480
  • [05:03:36] <lilly> and for fb1 it set for 640 x 400
  • [05:03:45] <Brokie> did you saveenv?
  • [05:03:58] <lilly> yeah
  • [05:04:08] <Brokie> try...
  • [05:04:29] <Brokie> setenv dvimode '1080p60'
  • [05:05:04] * DaQatz (~db@c-66-30-48-150.hsd1.nh.comcast.net) has joined #beagle
  • [05:07:49] <Brokie> setenv bootargs '$({Yourbootargs}) omapfb.mode=dvi:1080p60 omapfb.vram=0:8M,1:16M'
  • [05:09:03] <Brokie> ds2, you leave?
  • [05:11:02] <Brokie> sniffle
  • [05:11:20] <Brokie> Kwickbyte, only have uImage, and u-boot.bin
  • [05:11:25] <Brokie> no X-loader
  • [05:12:07] * jonmasters (~jcm@dallas.jonmasters.org) has joined #beagle
  • [05:13:44] <DanaG> http://orion.dherring.com/beagleTouchWiki/OmapFb
  • [05:15:23] * hazamin (~omar66@109.70.185.133) has joined #beagle
  • [05:17:27] <hazamin> hi. what is the difference between rootfs.jffs2 and rootfs.tar.gz? Is the "tar.gz" just a set of files that FS need? Or you can use either one for flashing?
  • [05:21:44] * hazamin (~omar66@109.70.185.133) Quit (Ping timeout: 245 seconds)
  • [05:28:36] * robclark (~robclark@nat/ti/x-jatwbhrtjbpfqpdn) Quit (Quit: robclark)
  • [05:29:39] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Quit: Yuvi)
  • [05:29:41] * hazamin (~omar66@109.70.185.133) has joined #beagle
  • [05:31:45] <thurbad> rootfs and tar.gz go on the SD, the tar,gz is a compressed version of rootfs, and needs to be expanded with tar or similar
  • [05:31:50] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) has joined #beagle
  • [05:31:59] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) has joined #beagle
  • [05:32:22] <Brokie> jffs2 is a FLASH based filesystem, to be mounted as a MTD device only
  • [05:33:39] * samway_ (~samway@76.84.51.66) has joined #beagle
  • [05:38:56] <hazamin> ok. And can't we flash rootfs.tar.gz on the NAND without having proceeded it with mkimage?
  • [05:39:32] <Brokie> lol
  • [05:39:52] <Brokie> if you wanna waste time, sure
  • [05:40:41] <hazamin> I don't want )
  • [05:41:23] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) Quit (Quit: Leaving.)
  • [05:41:27] <Brokie> no... its DO NOT WANT, followed by pictures of scared kittens :)
  • [05:41:37] <Brokie> lol
  • [05:42:56] <Brokie> Example...
  • [05:42:58] <Brokie> http://www.wired.com/images_blogs/gadgetlab/images/2007/10/10/donotwant.jpg
  • [05:43:04] <Brokie> hehe
  • [05:43:36] * Guest32219 (~hitokiri@41.7.186.106) has joined #beagle
  • [05:44:38] * funkathustra (~Jay@76.84.0.186) has left #beagle
  • [05:44:52] * siji (~siji@122.170.9.183) has joined #beagle
  • [05:47:07] <hazamin> :)
  • [05:49:09] * pradeepbs (~3d7801b6@gateway/web/freenode/x-wkpfwwrcgrxbshsh) has joined #beagle
  • [05:51:38] <pradeepbs> where can I find the tutorials in video about using beagle board
  • [05:55:20] * pundiramit (~pundirami@122.166.106.68) has joined #beagle
  • [06:08:23] <hazamin> http://beagleintern.blogspot.com maybe here
  • [06:08:35] * hazamin (~omar66@109.70.185.133) has left #beagle
  • [06:09:30] * Guest32219 (~hitokiri@41.7.186.106) Quit (Quit: Nettalk6 - www.ntalk.de)
  • [06:13:06] * BThompsonGR (~bernie@cpe-76-184-159-129.tx.res.rr.com) Quit (Read error: Connection reset by peer)
  • [06:17:51] * DanaG (~dana@66-169-236-186.static.snlo.ca.charter.com) Quit (Quit: Running with ???. And throwing ?????? at stuff. I ??? Unicode!)
  • [06:54:14] * samway_ (~samway@76.84.51.66) Quit (Quit: samway_)
  • [06:59:51] * kanru1 (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [07:00:11] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Read error: Connection reset by peer)
  • [07:14:17] * Ceriand|desktop1 (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 260 seconds)
  • [07:17:40] * denix (~denys@nat/ti/x-jixvfffakudiflfs) Quit (Remote host closed the connection)
  • [07:17:56] * denix (~denys@nat/ti/x-zxhwbvejgrbjuidc) has joined #beagle
  • [07:27:48] * lilly (~744a7969@gateway/web/freenode/x-fbqhbnrmzvaqatzx) Quit (Ping timeout: 252 seconds)
  • [07:27:56] * bswix (~rode@147.84-49-231.nextgentel.com) has joined #beagle
  • [07:29:39] * soman (~somnath@stargate.starnet.fi) has joined #beagle
  • [07:30:26] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [07:32:27] * lilly (~744a7969@gateway/web/freenode/x-bnecnklohjxesvwp) has joined #beagle
  • [07:34:52] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) Quit (Quit: WeeChat 0.3.2-dev)
  • [07:34:56] * virals (~Viral_Sac@59.97.0.74) Quit (Ping timeout: 258 seconds)
  • [07:35:12] * virals (~Viral_Sac@122.166.2.35) has joined #beagle
  • [07:35:26] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) has joined #beagle
  • [07:41:05] * kanru1 (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Quit: WeeChat 0.3.1.1)
  • [07:43:34] * Try`0xff is now known as Tryum
  • [07:46:47] * beaglefreek (~3d7801b6@gateway/web/freenode/x-riedjupnhxcxsoiv) has joined #beagle
  • [07:48:05] <beaglefreek> has anybody tried Timesys(LinkLinux) is it useful when developing applications with OMAP35x
  • [07:49:31] * beaglefreek (~3d7801b6@gateway/web/freenode/x-riedjupnhxcxsoiv) has left #beagle
  • [07:50:01] * pradeepbs_ (~3d7801b6@gateway/web/freenode/x-edyubwdujqitjtia) has joined #beagle
  • [07:51:47] <_koen_> sakoman: any news on the xm uboot patches?
  • [07:52:44] * lilly (~744a7969@gateway/web/freenode/x-bnecnklohjxesvwp) Quit (Ping timeout: 252 seconds)
  • [07:52:58] * lilly_ (~744a7969@gateway/web/freenode/x-hyyfkfqqgfsnsghs) has joined #beagle
  • [07:56:00] * pradeepbs (~3d7801b6@gateway/web/freenode/x-wkpfwwrcgrxbshsh) Quit (Quit: Page closed)
  • [07:56:50] <thurbad> anyone familiar w/ the default pixel format of the framebuffer on the beagleboard?
  • [07:57:09] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [07:58:29] * pradeepbs_ (~3d7801b6@gateway/web/freenode/x-edyubwdujqitjtia) Quit (Quit: Page closed)
  • [08:03:28] <lilly_> thurbad : that depends upon ur boot args
  • [08:05:40] <thurbad> I'm using a 16 bit color depth.. or at least should be
  • [08:07:19] <lilly_> you can check with following command
  • [08:07:26] <lilly_> fbset -fb /dev/fb0 or /dev/fb1
  • [08:08:59] * killring (~killring@adsl-76-234-150-254.dsl.sfldmi.sbcglobal.net) Quit (Quit: killring)
  • [08:10:25] <thurbad> hmm, it's rgb 565.. like I thought.. maybe sdl is cooking things when it loads
  • [08:17:12] * Barts_ (~Barts@c-76-108-137-30.hsd1.fl.comcast.net) Quit (Quit: Leaving)
  • [08:19:32] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 246 seconds)
  • [08:19:50] * dusan (~c31c8215@gateway/web/freenode/x-yglpzsbkgsgxwgbo) has joined #beagle
  • [08:20:18] * _roger_ (~a0740758@nat/ti/x-sjivbhkkhyavlmpq) has joined #beagle
  • [08:20:36] * dusan (~c31c8215@gateway/web/freenode/x-yglpzsbkgsgxwgbo) Quit (Client Quit)
  • [08:21:52] * Barts_ (~Barts@c-76-108-137-30.hsd1.fl.comcast.net) has joined #beagle
  • [08:26:22] * shoragan (~shoragan@sicherheitsschwankung.de) has joined #beagle
  • [08:26:22] * shoragan (~shoragan@sicherheitsschwankung.de) Quit (Changing host)
  • [08:26:22] * shoragan (~shoragan@debian/developer/shoragan) has joined #beagle
  • [08:27:09] * zeroresidue (~sawdis@modemcable203.209-56-74.mc.videotron.ca) Quit (Quit: Leaving.)
  • [08:34:33] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [08:34:39] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: No route to host)
  • [08:35:03] * ogra_ (~ogra@p5098ed03.dip0.t-ipconnect.de) Quit (Read error: Connection reset by peer)
  • [08:35:10] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [08:35:56] * virals (~Viral_Sac@122.166.2.35) Quit (Ping timeout: 268 seconds)
  • [08:36:28] * virals (~Viral_Sac@59.97.1.175) has joined #beagle
  • [08:36:47] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [08:37:33] * jpirko (~jirka@ip-89-103-91-23.karneval.cz) has joined #beagle
  • [08:42:25] * siji (~siji@122.170.9.183) Quit (Read error: Connection reset by peer)
  • [08:47:07] * bearsh|work (~quassel@inst-232.173.zhaw.ch) has joined #beagle
  • [08:47:33] * re0x4 (~omar66@109.70.185.133) has joined #beagle
  • [08:47:49] <re0x4> hi
  • [08:49:20] <re0x4> Should I try "nand write 80000000 680000 F980000" or "nand write 80000000 680000 ${filesize}" ? In the first case my board hangs on
  • [08:49:54] <re0x4> i mean it didn't finish even in a 3-4 hours
  • [08:55:52] * nrossi (~na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [08:58:49] * re0x4 (~omar66@109.70.185.133) has left #beagle
  • [09:01:01] * XorA (~XorA@www.xora.org.uk) has joined #beagle
  • [09:01:30] * siji (~siji@122.170.9.183) has joined #beagle
  • [09:15:02] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [09:17:09] * bigcren (~bigcren@222.131.191.7) Quit (Ping timeout: 245 seconds)
  • [09:18:07] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Ping timeout: 276 seconds)
  • [09:18:28] * bigcren (~bigcren@222.131.191.7) has joined #beagle
  • [09:22:02] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [09:30:32] * _roger_ (~a0740758@nat/ti/x-sjivbhkkhyavlmpq) Quit (Ping timeout: 265 seconds)
  • [09:31:47] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [09:38:07] * hrw|gone is now known as hrw
  • [09:38:44] <hrw> morning
  • [09:47:17] * bigcren (~bigcren@222.131.191.7) has left #beagle
  • [10:08:58] * lilly_ (~744a7969@gateway/web/freenode/x-hyyfkfqqgfsnsghs) Quit (Quit: Page closed)
  • [10:11:07] * Tom__ (~839f1557@gateway/web/freenode/x-vjuwuvkerjdsrlqj) has joined #beagle
  • [10:13:19] <chakie_work> great. i have my openembedded build tree where my daily backup picks it up. i guess it takes a bit longer this time :)
  • [10:15:49] * bigcren (~bigcren@222.131.191.7) has joined #beagle
  • [10:20:31] * bigcren (~bigcren@222.131.191.7) has left #beagle
  • [10:34:25] * cbrake (~cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [10:39:07] * ogra (~ogra@ubuntu/member/ogra) Quit (Read error: Connection reset by peer)
  • [10:39:37] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [10:43:06] * DJWillis (djwillis@cpc1-bath2-0-0-cust327.aztw.cable.virginmedia.com) has joined #beagle
  • [10:46:11] * yogi (~florin@iucha.net) Quit (Ping timeout: 246 seconds)
  • [10:47:05] * nitin_ (~nitin@122.166.8.45) has joined #beagle
  • [10:47:18] * Ceriand|desktop (~Ceriand@unaffiliated/ceriand) Quit (Quit: Leaving.)
  • [10:48:07] <nitin_> Is there a way/need to reset frame buffer after changin the resolution through fbset?
  • [10:50:33] * Brokie (~default@2-248.35-65.tampabay.res.rr.com) Quit (Ping timeout: 256 seconds)
  • [10:55:13] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [10:58:55] * _roger_ (~a0740758@nat/ti/x-zxjqocccafrwhzku) has joined #beagle
  • [11:01:34] <nitin_> I am changing the resolution to 1024x768 from 720x482 using fbset -g
  • [11:01:48] * Entasis (~Jarred@ppp121-45-62-82.lns20.adl2.internode.on.net) has joined #beagle
  • [11:01:49] <nitin_> After which I see the output as scrambled on screen
  • [11:02:03] <nitin_> Only after reboot its proper
  • [11:02:17] <nitin_> I just wanted to know, how to avoid that reboot
  • [11:02:28] <nitin_> And change the resolution on the ly
  • [11:02:42] <nitin_> I mean on the fly
  • [11:02:42] <chakie_work> if you find out, please tell me too
  • [11:04:02] <nitin_> You mean it's not possible, am I trying to do somethign wrong
  • [11:08:32] * virals1 (~Viral_Sac@59.97.0.52) has joined #beagle
  • [11:10:09] <virals1> nitin_ :Hi, I do not know for Beagle but just search for FBIO_SETSTD in framebuffer driver. It might be available in this ioctl.
  • [11:10:45] * virals (~Viral_Sac@59.97.1.175) Quit (Ping timeout: 276 seconds)
  • [11:12:04] <chakie_work> nitin_: no, i didn't mean that at all. i'm also a bit of a fb n00b and would also like to know
  • [11:15:02] <virals1> nitin_ : sorry, it is FBIOPUT_VSCREENINFO , u put your requirement as arg, if possible driver will set else it will provide return code
  • [11:15:18] <virals1> nitin_ : I m fail code
  • [11:17:42] * KosiNuss (~tom@p4FD12641.dip0.t-ipconnect.de) has joined #beagle
  • [11:23:01] * lilly (~744a7969@gateway/web/freenode/x-yarbarbbpqkadrhn) has joined #beagle
  • [11:23:39] <lilly> Is there any problem on narcissus while building stable demo image for beagle board ?
  • [11:24:14] <lilly> infront of all packages i am getting red cross sign
  • [11:29:41] <nitin_> I want to do all that on command line
  • [11:30:17] <nitin_> basic Idea is to switch from a 720x480 tv display to 1024x768 lcd display
  • [11:33:09] * guillaum1 (~gl@AMontsouris-153-1-82-63.w90-2.abo.wanadoo.fr) Quit (Quit: Leaving.)
  • [11:36:01] * virals1 (~Viral_Sac@59.97.0.52) Quit (Ping timeout: 245 seconds)
  • [11:36:23] * virals (~Viral_Sac@122.166.2.35) has joined #beagle
  • [11:36:47] <virals> nitin_ you can do that using call that ioctl using application which can be called via shell.
  • [11:47:46] * mlip2 (~mlip2@62.218.44.194) has joined #beagle
  • [11:49:48] <nitin_> I meant , I want to do all that using fbset and sysfs interface
  • [11:50:14] <nitin_> av500: can you please provide some inputs
  • [11:52:50] * lilly (~744a7969@gateway/web/freenode/x-yarbarbbpqkadrhn) Quit (Quit: Page closed)
  • [11:59:41] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Ping timeout: 246 seconds)
  • [12:01:24] * thaytan (~jan@121.91.41.2) Quit (Ping timeout: 240 seconds)
  • [12:04:38] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [12:06:24] * Yuvi (~yuvi@d-69-161-90-167.cpe.metrocast.net) has joined #beagle
  • [12:18:36] * kanru (~kanru@61-30-10-70.static.tfn.net.tw) Quit (Quit: WeeChat 0.3.1.1)
  • [12:18:38] * samway (~samway@cpe-76-84-51-66.neb.res.rr.com) has joined #beagle
  • [12:18:39] * samway_ (~samway@cpe-76-84-51-66.neb.res.rr.com) has joined #beagle
  • [12:19:07] * samway_ (~samway@cpe-76-84-51-66.neb.res.rr.com) has left #beagle
  • [12:19:58] * samway_ (~samway@cpe-76-84-51-66.neb.res.rr.com) has joined #beagle
  • [12:24:13] * ddompe (~ddompe@ip221-27-10-190.ct.co.cr) has joined #beagle
  • [12:32:33] * mlip2 (~mlip2@62.218.44.194) Quit (Remote host closed the connection)
  • [12:38:04] * KosiNuss (~tom@p4FD12641.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [12:38:32] * KosiNuss (~tom@p4FD12641.dip0.t-ipconnect.de) has joined #beagle
  • [12:51:11] * samway (~samway@cpe-76-84-51-66.neb.res.rr.com) Quit (Quit: samway)
  • [12:51:11] * samway_ (~samway@cpe-76-84-51-66.neb.res.rr.com) Quit (Quit: samway_)
  • [12:51:29] * srv (~7aa60de8@gateway/web/freenode/x-ybddsfsdnykkbkmz) has joined #beagle
  • [12:52:28] <srv> i try to enable mmc2 on custom board, i get the message: regulator: Unable to get requested regulator: vmmc and regulator: Unable to get requested regulator: vmmc_aux, any idea why this happens
  • [12:55:30] * rcranetx (~rcranetx@nat/ti/x-uqrxcbrmvxrvpvly) has joined #beagle
  • [12:56:41] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [12:56:41] * jkridner|work (~a0321898@nat/ti/x-wgftwevjccyerqjn) has joined #beagle
  • [12:57:40] * djlewis1 (~djlewis@75.15.67.125) has joined #beagle
  • [12:59:38] * ppotera (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [13:01:51] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [13:01:58] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) has joined #beagle
  • [13:04:24] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [13:08:34] * NishanthMenon (~nmenon@nat/ti/x-yrmetrarxuuugrqk) has joined #beagle
  • [13:09:03] * rsalveti (~rsalveti@200.184.118.130) has joined #beagle
  • [13:11:44] * nitin_ (~nitin@122.166.8.45) Quit (Read error: Connection reset by peer)
  • [13:16:42] * Tom__ (~839f1557@gateway/web/freenode/x-vjuwuvkerjdsrlqj) Quit (Quit: Page closed)
  • [13:17:45] * ddompe (~ddompe@ip221-27-10-190.ct.co.cr) Quit (Quit: ddompe)
  • [13:27:04] * notaz (~notaz@82-135-242-201.static.zebra.lt) Quit (Ping timeout: 276 seconds)
  • [13:29:11] * nitin_ (~nitin@122.166.8.45) has joined #beagle
  • [13:30:35] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) Quit (Quit: Leaving.)
  • [13:32:14] * virals (~Viral_Sac@122.166.2.35) has left #beagle
  • [13:32:49] * virals (~Viral_Sac@122.166.2.35) has joined #beagle
  • [13:34:21] * notaz (~notaz@82-135-242-201.static.zebra.lt) has joined #beagle
  • [13:35:08] * Hrww (~hrw@chello089078170228.chello.pl) has joined #beagle
  • [13:35:35] * hrw is now known as hrw2
  • [13:35:43] * Hrww is now known as hrw
  • [13:35:57] * hrw2 (~hrw@chello089078170228.chello.pl) Quit ()
  • [13:39:56] * Openfree` (~Openfreer@116.228.88.98) Quit (Read error: Connection timed out)
  • [13:40:26] * robclark (~robclark@nat/ti/x-zeghkvlrtyeikdoa) has joined #beagle
  • [13:40:45] * Openfree` (~Openfreer@116.228.88.98) has joined #beagle
  • [13:43:13] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [13:46:00] * notaz (~notaz@82-135-242-201.static.zebra.lt) Quit (Ping timeout: 258 seconds)
  • [13:46:40] * Phrog (~chatzilla@ip-87-82-198-210.easynet.co.uk) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.6/20100115144158])
  • [13:47:14] * kazken3 (~kazken@pdd1289.osakac00.ap.so-net.ne.jp) has joined #beagle
  • [13:51:14] <hrw> _koen_: armv6-novfp?
  • [13:51:58] <_koen_> hrw: correct :)
  • [13:52:16] * DaQatz (~db@c-66-30-48-150.hsd1.nh.comcast.net) Quit (Ping timeout: 245 seconds)
  • [13:52:52] <jkridner|work> anybody seen a blog entry about the Zippy2 being available at Digi-Key? I want to put it in the BeagleBoard.org RSS feed.
  • [13:57:51] * BThompson (~a0193480@nat/ti/x-ftgbrfpwfzouxxfm) has joined #beagle
  • [13:58:06] <_koen_> jkridner|work: only the irc announcement by prpplague_afk
  • [13:59:31] * notaz (~notaz@82-135-242-201.static.zebra.lt) has joined #beagle
  • [14:01:08] * ogra (~ogra@ubuntu/member/ogra) Quit (Quit: Verlassend)
  • [14:02:16] * ddompe (~ddompe@200.122.155.113) has joined #beagle
  • [14:03:13] * Neithan (~juan@170.51.100.200) has joined #beagle
  • [14:03:26] <Neithan> I NEED HELP!!!!!!
  • [14:04:34] <Neithan> PLZ! ANYBODY OUT THERE?
  • [14:07:54] <tomba> call 911!
  • [14:08:11] * brijesh (~brijesh@nat/ti/x-ismqaugczvozqtbj) has joined #beagle
  • [14:08:19] <Neithan> i dont think they can help me there..
  • [14:08:26] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) has joined #beagle
  • [14:09:52] <Neithan> I have compiled a new kernel version but whenever i try to boot it, it get stacked at "loading kernel image"
  • [14:10:47] <Neithan> ...
  • [14:10:49] <Neithan> ...
  • [14:11:04] <Neithan> any hint? advice? solution?
  • [14:11:18] * notaz1 (~notaz@213-190-49-43.static.zebra.lt) has joined #beagle
  • [14:11:39] <adj> check bootargs, try with default configuration, enable low level debugging...
  • [14:12:36] * Neithan (~juan@170.51.100.200) Quit (Quit: Saliendo)
  • [14:12:51] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) has joined #beagle
  • [14:13:17] * KosiNuss (~tom@p4FD12641.dip0.t-ipconnect.de) Quit (Remote host closed the connection)
  • [14:13:22] * notaz (~notaz@82-135-242-201.static.zebra.lt) Quit (Ping timeout: 248 seconds)
  • [14:13:35] * Neithan (~juan@170.51.100.200) has joined #beagle
  • [14:15:29] * ogra (~ogra@ubuntu/member/ogra) has joined #beagle
  • [14:16:09] * rhk (~rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [14:16:31] * GPSFan (~kenm@64.92.145.112) has joined #beagle
  • [14:18:01] * Hrww (~hrw@chello089078170228.chello.pl) has joined #beagle
  • [14:20:49] * hrw (~hrw@chello089078170228.chello.pl) Quit (Ping timeout: 260 seconds)
  • [14:21:41] * kerute (~kerute@kerunix.com) Quit (Remote host closed the connection)
  • [14:22:55] * kerute (~kerute@kerunix.com) has joined #beagle
  • [14:24:29] <tehpola> hm, I'm running Debian here on my BB, and I'm getting a lot of page allocation failures in my syslog although in the error message it looks like I have enough swap available (most of it isn't in use)
  • [14:27:51] * ppotera_ (~ppotera@c-69-243-130-95.hsd1.il.comcast.net) has joined #beagle
  • [14:29:23] <buZz> cool, i can run my board from 6 to 23V now :P
  • [14:29:32] * buZz charging up a li-ion cell ;)
  • [14:30:05] * Hrww is now known as hrw
  • [14:31:21] * khasim (~a0393720@192.163.20.231) Quit (Remote host closed the connection)
  • [14:32:13] * khasim (~a0393720@192.163.20.232) has joined #beagle
  • [14:39:39] * mrc3 (~ddiaz@122.181.11.126) has joined #beagle
  • [14:40:11] * siji (~siji@122.170.9.183) Quit (Quit: Leaving)
  • [14:42:06] * virals (~Viral_Sac@122.166.2.35) Quit (Remote host closed the connection)
  • [14:42:40] <sakoman> _koen_: I haven't commited the XM changes yet because I haven't actually gotten a board with 512MB ram working
  • [14:42:53] <sakoman> I intended to do them all at once
  • [14:43:50] <sakoman> but sadly it is taking longer than I expected
  • [14:45:54] <_koen_> sakoman: the current XMs are with 256MB
  • [14:45:58] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) Quit (Quit: Leaving.)
  • [14:46:19] <_koen_> we talked about 512MB patches about an hour ago :)
  • [14:46:28] <kerute> im not sure to follow, are the XM available ?
  • [14:46:30] <_koen_> (we being the people on the beagle team in TI)
  • [14:46:40] <_koen_> kerute: no, that will take a few months
  • [14:46:45] <kerute> ah ok :)
  • [14:47:09] <kerute> beacause i just ordered a BB :)
  • [14:49:03] * nitin_ (~nitin@122.166.8.45) Quit (Ping timeout: 252 seconds)
  • [14:49:59] <sakoman> _koen_: do you have patches internally for 512MB?
  • [14:50:50] <sakoman> I did the x-load patch yesterday to recognize the new vendor/device ID for the board I am working on, so I got past the x-load "unsupported chip" barrier
  • [14:50:54] * raster (~raster@enlightenment/developer/raster) Quit (Quit: Gettin' stinky!)
  • [14:51:26] <sakoman> I then moved on to the u-boot code, but haven't yet gotten 512 working there
  • [14:52:40] <_koen_> nothing public I know off
  • [14:53:22] <_koen_> sakoman: I have a touchbook with 512MB ram, but I suspect gregoire doesn't have the patches for that on the web (only his binaries work, rebuilding doesn;t)
  • [14:53:37] <sakoman> all right, I'll keep working on that later today
  • [14:53:47] <sakoman> I guess I could push your 2 XM patches, since they really aren't related to the extra memory
  • [14:53:52] <_koen_> we want to ditch xloader for xm and switch to the config header
  • [14:54:01] <_koen_> we have no nand anyway :)
  • [14:54:06] <sakoman> I'll check and make sure they don't break anything for me
  • [14:54:33] <sakoman> _koen_: right :-) my board has both nand and extra ram
  • [14:55:19] <_koen_> like my touchbook :)
  • [14:55:19] <sakoman> _koen_: IGEPv2 also has 512 ram, but they use a somewhat strange ONENAND POP module
  • [14:57:40] <buZz> sakoman: any luck on getting the igep to output svideo? :D
  • [14:58:07] <sakoman> buZz: sorry, haven't spent any time on that at all
  • [14:58:29] <buZz> aww boohoo
  • [14:58:32] <buZz> :)
  • [14:58:32] <sakoman> I'm working with a client that has svideo out
  • [14:58:42] <sakoman> and will be testing on their board today
  • [14:59:08] <buZz> well, keep me posted :D
  • [14:59:15] <sakoman> OK
  • [14:59:24] <hrw> omap3 supports *only* pop memories - right?
  • [14:59:26] <buZz> i had my IGEP running from a SLA battery today
  • [14:59:38] <buZz> now i'm going to move to li-ion cells
  • [14:59:41] * kg4giy (~kg4giy@pool-74-96-195-152.washdc.fios.verizon.net) has joined #beagle
  • [14:59:41] * kg4giy (~kg4giy@pool-74-96-195-152.washdc.fios.verizon.net) Quit (Changing host)
  • [14:59:41] * kg4giy (~kg4giy@linuxjournal/staff/DavidLane) has joined #beagle
  • [14:59:55] <sakoman> hrw: no, there are versions that can use non-pop memory
  • [15:00:17] <sakoman> different package option than beagle/overo/igep/zoom use
  • [15:00:57] <sakoman> not sure how popular that package option is
  • [15:00:59] <hrw> I hope that 2010 will bring me 12" wxga laptop with armv7a + 1GB ram
  • [15:05:11] * notaz1 (~notaz@213-190-49-43.static.zebra.lt) Quit (Ping timeout: 246 seconds)
  • [15:05:34] <hrw> but it seems that omap3 will not be inside ;(
  • [15:07:03] * kazken3 (~kazken@pdd1289.osakac00.ap.so-net.ne.jp) Quit (Quit: Ex-Chat)
  • [15:09:44] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [15:11:43] <kerute> i was wondering, does pop memory means i can buy a bigger memory and change the one on the beagleboard ?
  • [15:12:32] <hrw> no
  • [15:12:45] <buZz> hrw: guess it'll be omap4 eh ;)
  • [15:13:10] <_koen_> hrw: you rcn rePOP devices, but I doubt it's cost effective
  • [15:13:24] <_koen_> s/rcn/can/
  • [15:14:17] * bswix (~rode@147.84-49-231.nextgentel.com) Quit (Remote host closed the connection)
  • [15:15:39] * nrossi (~na@61.37.96.58.static.exetel.com.au) Quit ()
  • [15:15:39] * BThompson (~a0193480@nat/ti/x-ftgbrfpwfzouxxfm) Quit (Read error: Connection reset by peer)
  • [15:16:46] * BThompson (~a0193480@nat/ti/x-ujusxmaskdxrxgbq) has joined #beagle
  • [15:18:22] <hrw> buZz: or snapdragon or marvell or .... who knows
  • [15:19:01] <kerute> so pop memory is just cool/usefull for manufacturers, not for users
  • [15:19:16] <hrw> kerute: ?
  • [15:19:20] <buZz> kerute: makes your device smaller ;)
  • [15:19:25] * Neithan (~juan@170.51.100.200) Quit (Quit: Saliendo)
  • [15:19:29] <kerute> yeah sure
  • [15:19:30] <hrw> kerute: show me user which can solder BGA at home
  • [15:19:49] <kerute> but i tought it would be just a chip you clip
  • [15:20:06] <buZz> why?
  • [15:20:41] * notaz (~notaz@213-190-49-43.static.zebra.lt) has joined #beagle
  • [15:21:06] <kerute> dont know, the sschema i seen for a pop memory seemed just like some balls inserted in the border of the proc
  • [15:21:27] <buZz> yeah, those balls are solder ;)
  • [15:22:17] <kerute> ah ok thats what i missed
  • [15:22:57] * ynezz (ynezz@ibawizard.net) Quit (Ping timeout: 276 seconds)
  • [15:23:01] <_koen_> man, I suck at typing today
  • [15:23:09] <kerute> now its clear thanks
  • [15:23:44] <_koen_> jkridner|work: aren't you supposed to be on holiday?
  • [15:28:11] * alancam (~a-campbel@nat/ti/x-uriraitbnwkxdwxn) has joined #beagle
  • [15:28:57] <jkridner> that was Friday.
  • [15:28:59] * mobidev (~mobidev@94.127.205.30) has joined #beagle
  • [15:29:35] <jkridner> I'm still a bit distracted from cleaning up from my holiday though. :)
  • [15:31:35] * Zoxc (~zoxc@ti0128a340-dhcp0330.bb.online.no) has joined #beagle
  • [15:32:06] * jserv-- (~jserv@61-30-10-70.static.tfn.net.tw) Quit (Remote host closed the connection)
  • [15:33:00] * jeremychang (~jeremycha@61.57.131.211) Quit (Quit: ??????)
  • [15:37:49] * Entasis (~Jarred@ppp121-45-62-82.lns20.adl2.internode.on.net) Quit (Quit: Leaving)
  • [15:45:41] * don (~7aa7d13a@gateway/web/freenode/x-abimrjvwjrsphdin) has joined #beagle
  • [15:46:06] * don is now known as Guest49746
  • [15:46:15] * Guest49746 (~7aa7d13a@gateway/web/freenode/x-abimrjvwjrsphdin) Quit (Client Quit)
  • [15:46:27] * ynezz (ynezz@ibawizard.net) has joined #beagle
  • [15:47:31] * BThompson1 (~a0193480@nat/ti/x-fjzlsszxvtdtbuxi) has joined #beagle
  • [15:48:42] * BThompson (~a0193480@nat/ti/x-ujusxmaskdxrxgbq) Quit (Read error: Connection reset by peer)
  • [15:49:16] * khasim (~a0393720@192.163.20.232) Quit (Quit: Leaving.)
  • [15:51:03] * [Bigneko] (~Storekatt@94.145.194.40) has joined #beagle
  • [16:06:58] * tasslehoff (~Mich@147.84-49-231.nextgentel.com) Quit (Ping timeout: 248 seconds)
  • [16:09:49] * jpirko (~jirka@ip-89-103-91-23.karneval.cz) Quit (Quit: Leaving)
  • [16:17:28] * naeg (~naeg@194.208.239.170) Quit (Read error: Operation timed out)
  • [16:23:49] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [16:23:54] * Crofton (~balister@HSI-KBW-091-089-004-107.hsi2.kabelbw.de) has joined #beagle
  • [16:27:30] * prpplague_afk is now known as prpplague
  • [16:28:46] <prpplague> jkridner: no real blog entry about the zippy2
  • [16:35:09] * djlewis1 (~djlewis@75.15.67.125) Quit (Ping timeout: 240 seconds)
  • [16:36:13] * jkridner|work (~a0321898@nat/ti/x-wgftwevjccyerqjn) Quit (Ping timeout: 256 seconds)
  • [16:36:24] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Ping timeout: 240 seconds)
  • [16:39:06] * jkridner|work (~a0321898@nat/ti/x-mwxdtrfjxvpreuzj) has joined #beagle
  • [16:39:13] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [16:41:33] * radhermit (~radhermit@radhermit-1-pt.tunnel.tserv3.fmt2.ipv6.he.net) has joined #beagle
  • [16:42:19] * guillaum1 (~gl@AMontsouris-153-1-82-63.w90-2.abo.wanadoo.fr) has joined #beagle
  • [16:45:51] * jkridner (~a0321898@pdpc/supporter/active/jkridner) Quit (Ping timeout: 256 seconds)
  • [16:46:19] * jpirko (~jirka@ip-89-103-91-23.karneval.cz) has joined #beagle
  • [16:47:09] * jkridner|work (~a0321898@nat/ti/x-mwxdtrfjxvpreuzj) Quit (Ping timeout: 240 seconds)
  • [16:47:13] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [16:54:03] * thaytan (~jan@119.12.13.162) has joined #beagle
  • [16:55:37] * khasim (~a0393720@192.163.20.231) has joined #beagle
  • [16:59:28] * XorA (~XorA@www.xora.org.uk) has left #beagle
  • [17:17:04] <buZz> hehe, just two 18650 cells is fine to run my board <3
  • [17:18:03] * pmeerw_ (~pmeerw@mail.commend.com) Quit (Ping timeout: 240 seconds)
  • [17:18:51] <hrw> ok, who tried to make working system *without* busybox (from OE)?
  • [17:19:11] * _koen_ raises hand
  • [17:19:23] <hrw> _koen_: effects?
  • [17:19:32] <hrw> _koen_: notes? recipes?
  • [17:19:45] <_koen_> I gave up and included busybox as fall-back
  • [17:19:56] <_koen_> but task-proper-tools is in a much better shape now
  • [17:20:10] <hrw> need to check its state
  • [17:21:58] * kg4giy (~kg4giy@linuxjournal/staff/DavidLane) Quit (Quit: Time to track the dreaded Jabberwocky!)
  • [17:24:56] <_koen_> mru: ping
  • [17:25:33] <mru> pong
  • [17:25:46] <hrw> _koen_: last changes were mine - you have some extras for task-proper-tools?
  • [17:25:59] <_koen_> hrw: nope
  • [17:26:12] <_koen_> mru: what does you beagle report with hdparm -tT ?
  • [17:26:13] <hrw> ok, so your attempts were over year ago
  • [17:26:33] <_koen_> mru: and does omapfbplay still have that benchmarking feature?
  • [17:27:03] <_koen_> hdparm reports 150MB/s for ram, which seems low
  • [17:27:12] <_koen_> (640x480 24bit fb)
  • [17:27:25] <mru> omapfbplay benchmark should still be there
  • [17:28:59] <_koen_> ah, -t
  • [17:29:54] <mru> I get similar readings
  • [17:30:04] * soman (~somnath@stargate.starnet.fi) Quit (Read error: Connection reset by peer)
  • [17:30:37] * _koen_ is trying to figure out why a beagle running at 1GHz can't decode bbb 720p while the one at 600MHz can
  • [17:31:33] * pmeerw_ (~pmeerw@mail.commend.com) has joined #beagle
  • [17:32:02] <mru> what does omapfbplay bench report?
  • [17:32:11] <mru> you need -s to get meaningful numbers
  • [17:32:18] <mru> otherwise it waits for vsync
  • [17:33:37] * bearsh|work (~quassel@inst-232.173.zhaw.ch) Quit (Read error: Connection reset by peer)
  • [17:33:42] * xxiao (~xxiao@140.242.26.81) has joined #beagle
  • [17:33:51] <_koen_> mru: 300fps for 1280x720
  • [17:34:29] <_koen_> 163MB/s read, 654MB/s write
  • [17:35:15] <mru> at 1GHz?
  • [17:36:32] <_koen_> yes
  • [17:36:48] <_koen_> same POP memory as regular beagles
  • [17:36:59] <mru> I get 200 fps at 600 here
  • [17:37:45] <_koen_> it's between 330 and 350 fps
  • [17:38:09] <_koen_> so that math works out
  • [17:38:26] <_koen_> guess I need to break out oprofile or something similar
  • [17:39:28] <ds2> _koen_: maybe something else is clocked down when the A8 is at 1GHz?
  • [17:39:41] * Tryum is now known as Try`0xff
  • [17:40:08] <_koen_> ds2: that's my guess as well, but mem and cpu seem to check out
  • [17:40:24] <_koen_> I wonder if it's the L3 bus
  • [17:41:01] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [17:41:49] <hrw> have a nice rest of day
  • [17:42:21] <_koen_> mru: the omapfbplay benchmark functions tests neon, right?
  • [17:42:25] * hrw is now known as hrw|gone
  • [17:43:16] <mru> whatever you ask for
  • [17:43:24] <mru> neon converter is the default
  • [17:48:47] * _koen_ suspects writing to framebuffer mem is slow
  • [18:04:39] * mlip2 (~mlip2@85-127-149-107.dynamic.xdsl-line.inode.at) has joined #beagle
  • [18:05:03] <mru> _koen_: that's what omapfbplay -t measures
  • [18:05:28] * XorA (~XorA@www.xora.org.uk) has joined #beagle
  • [18:06:33] <_koen_> hmmm
  • [18:07:31] * tsaaps (~8d533dd8@gateway/web/freenode/x-kvebqtklzegwsiij) has joined #beagle
  • [18:08:13] * khasim (~a0393720@192.163.20.231) Quit (Ping timeout: 264 seconds)
  • [18:08:43] <_koen_> mru: any guesses what might be causing the slowdowns on 37xx?
  • [18:09:06] <mru> no idea
  • [18:10:15] <_koen_> it can't even do 480p mpeg anymore
  • [18:10:19] <_koen_> mpeg4
  • [18:13:22] * |nfecteD (~xxx@246.80-203-41.nextgentel.com) Quit (Ping timeout: 248 seconds)
  • [18:13:40] * |nfecteD (~xxx@246.80-203-41.nextgentel.com) has joined #beagle
  • [18:16:13] * Try`0xff is now known as Tryum
  • [18:17:03] * jkridner|work (~a0321898@nat/ti/x-pxqxthfzhpvfogls) has joined #beagle
  • [18:17:03] * jkridner (~a0321898@pdpc/supporter/active/jkridner) has joined #beagle
  • [18:21:00] * Jefro (~jefro@cust-67-203-89-34.static.o1.com) Quit (Remote host closed the connection)
  • [18:22:16] <prpplague> buZz: yea 18650's do well for most applications
  • [18:22:22] <prpplague> buZz: you running two in series?
  • [18:22:26] <buZz> yep
  • [18:22:33] <buZz> http://www.flickr.com/photos/complete_bastiaan/4401963770/
  • [18:22:52] <buZz> my current charger is not capable of two cell charging though :(
  • [18:23:59] <prpplague> buZz: yea you have to be careful with the charging
  • [18:24:04] <buZz> uhuh
  • [18:24:11] <buZz> i'm getting http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7028
  • [18:24:15] <buZz> as soon as it's back in stock
  • [18:24:16] <prpplague> buZz: i assume you've got your 18650's with a protection circuit
  • [18:24:20] <buZz> uhuh
  • [18:24:30] <buZz> although it doesn't seem to work
  • [18:24:59] <buZz> it didn't cut the power @ 2.75V but drained it all the way to 2.42 :S (but i was just running an 1W LED of it to empty the cell)
  • [18:25:08] <prpplague> buZz: OH wow, i had not seen that before
  • [18:25:12] <prpplague> buZz: very nice
  • [18:25:21] <buZz> and cheap ;)
  • [18:25:41] <buZz> i'm thinking of making two 3S1P battery packs
  • [18:25:45] <buZz> and run them in parallel
  • [18:25:56] * prpplague makes a bookmark and note to order one
  • [18:26:04] <buZz> that way, i can swap while keeping the igep running :P
  • [18:26:13] <prpplague> buZz: nice idea
  • [18:26:36] <buZz> yeah, packs for these balancers aren't that hard to make
  • [18:26:42] <prpplague> buZz: i've used batteryspace.com for my prototype stuff in the past
  • [18:26:47] <buZz> http://etc.servehttp.com/3s2p.png
  • [18:27:05] <buZz> i get the cells from dealextreme, shitcheap, 4.something USD per 2500mAh cell
  • [18:27:18] <buZz> 6 of those would give me quite some battery life i guess
  • [18:27:28] <prpplague> nice
  • [18:27:41] <prpplague> buZz: definetly a good deal for hacking
  • [18:27:53] <prpplague> (not so much for prototyping and proof-of-concept)
  • [18:28:03] <buZz> well, sorta
  • [18:28:17] <buZz> depends what you want to achieve :P
  • [18:30:28] * |nfecteD (~xxx@246.80-203-41.nextgentel.com) Quit (Read error: Connection reset by peer)
  • [18:30:28] * InfecteD (~xxx@246.80-203-41.nextgentel.com) has joined #beagle
  • [18:30:56] * InfecteD is now known as Guest77043
  • [18:31:16] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) Quit (Ping timeout: 276 seconds)
  • [18:32:58] * |nfecteD (~xxx@246.80-203-41.nextgentel.com) has joined #beagle
  • [18:33:09] * Belna (~Thomas@ppp-88-217-121-2.dynamic.mnet-online.de) has joined #beagle
  • [18:34:42] * Guest77043 (~xxx@246.80-203-41.nextgentel.com) Quit (Ping timeout: 248 seconds)
  • [18:36:12] * Ceriand|work (~Ceriand@unaffiliated/ceriand) Quit (Ping timeout: 252 seconds)
  • [18:36:47] * _roger_ (~a0740758@nat/ti/x-zxjqocccafrwhzku) Quit (Quit: Leaving.)
  • [18:42:29] * alecrim (~alecrim@189.2.128.130) has joined #beagle
  • [18:43:07] <prpplague> buZz: replication is generally what i need, i need to be able to go to production on something and not have to worry that the bargain place is out of stock on the part
  • [18:47:35] * Tryum is now known as Try`0xff
  • [18:48:23] * Ceriand|work (~Ceriand@unaffiliated/ceriand) has joined #beagle
  • [18:49:24] <prpplague> jkridner jkridner|work it would be nice if digkey had the zippy2 listed as an accessory on the beagle product page
  • [18:54:33] * robtow (~rob@dsl092-218-034.sfo2.dsl.speakeasy.net) has joined #beagle
  • [18:56:49] * samway (~samway@76.84.10.159) has joined #beagle
  • [18:59:17] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [18:59:43] * BThompson1 (~a0193480@nat/ti/x-fjzlsszxvtdtbuxi) Quit (Read error: Connection reset by peer)
  • [18:59:48] * ssvb (~ssvb___@a88-112-120-50.elisa-laajakaista.fi) has joined #beagle
  • [19:00:05] * BThompson (~a0193480@nat/ti/x-ofzntitnhbozpvoc) has joined #beagle
  • [19:00:22] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [19:03:51] * anothern00b (~5660e356@gateway/web/freenode/x-jsctzaluodhuqwue) has joined #beagle
  • [19:04:02] <anothern00b> Hi All
  • [19:04:19] <anothern00b> My beagleboard fails to detect my USB Hub
  • [19:04:24] <anothern00b> Can somebody pls help?
  • [19:04:49] <anothern00b> I am running angstrom
  • [19:06:02] <XorA> anothern00b: EHCI or OTG?
  • [19:06:24] <anothern00b> EHCI
  • [19:06:29] * jconnoll1 (~jconnolly@firebug.buglabs.net) has joined #beagle
  • [19:06:34] <anothern00b> I power it up thru OTG
  • [19:06:39] * samway (~samway@76.84.10.159) Quit (Quit: samway)
  • [19:06:59] <XorA> what model of beagle?
  • [19:07:04] <anothern00b> Rev C4
  • [19:07:06] * jconnoll1 (~jconnolly@firebug.buglabs.net) Quit (Client Quit)
  • [19:07:19] * hlide (~chaton@vig91-4-82-247-134-92.fbx.proxad.net) has joined #beagle
  • [19:07:22] <XorA> no idea, then, Ive not actually used the EHCI
  • [19:07:27] <XorA> I really should get round to it
  • [19:07:41] <anothern00b> Am I doing it right?
  • [19:08:09] <anothern00b> When powering thru OTG it should support a powered USB hub on EHCI port rite??
  • [19:08:17] <prpplague> jkridner / jkridner|work trainer boards go on sale later this week
  • [19:08:18] * kgilmer_ (~kgilmer@firebug.buglabs.net) has joined #beagle
  • [19:08:39] <prpplague> oh no who let the "bug man" in here?
  • [19:09:13] * prpplague jokes with kgilmer_
  • [19:11:25] * anothern00b (~5660e356@gateway/web/freenode/x-jsctzaluodhuqwue) Quit (Quit: Page closed)
  • [19:12:08] * samway (~samway@rrcs-76-79-33-198.west.biz.rr.com) has joined #beagle
  • [19:13:19] * kgilmer_ (~kgilmer@firebug.buglabs.net) Quit (Quit: leaving)
  • [19:14:04] * kgilmer (~kgilmer@firebug.buglabs.net) has joined #beagle
  • [19:14:22] <samway> hey guys. anyone have experience using the dsp to generate tones to the audio out?
  • [19:16:48] <jkridner> samway: do you mean without having the buffers handled by the ARM?
  • [19:16:49] * ddompe (~ddompe@200.122.155.113) Quit (Ping timeout: 265 seconds)
  • [19:17:29] <jkridner> I know it is possible to configure the DAC with the ARM and then send samples directly from the DSP, but I haven't seen any open source software that does it.
  • [19:17:45] <jkridner> (not saying it doesn't exist, just that I haven't seen it.)
  • [19:18:13] <samway> jkridner: well, to be perfectly honest, i'm not exactly sure what i'm looking for. i would like to be able to send a message to the dsp with the dsplink and have the dsp play a tone
  • [19:19:11] <samway> kind of a hello world with the dsplink to get me started. the end goal is to make a synthesizer
  • [19:19:45] <jkridner> k, I don't know any simple demo like that. one of the nicest demos i've seen for making the DSP easy to use is one that gives it STDIO support and a neat compile script that generates an executable that runs on the ARM and loads the code on the DSP.
  • [19:20:19] <jkridner> it uses DSP/Link and MSGQ, but doesn't expose any of it to the programmer.
  • [19:20:27] <jkridner> that wouldn't generate an audio tone though.
  • [19:21:01] <samway> hmm.. it'd at least help me get started with the dsp-link stuff, though
  • [19:21:08] <jkridner> the GStreamer plug-ins make it reasonable to perform audio processing on the DSP, but they use the ARM to perform the output to the DAC.
  • [19:21:08] <samway> where is this demo?
  • [19:22:14] <samway> i've only read a little about gstreamer.. i'll have to take a look at it
  • [19:22:27] <jkridner> it is on gforge.ti.com, but it looks like it was made private for now.
  • [19:22:39] <jkridner> I think some copyright issues had to be resolved.
  • [19:22:47] <samway> ah, fair enough
  • [19:23:03] <jkridner> the GStreamer plug-ins are public.
  • [19:23:08] <jkridner> http://gstreamer.ti.com
  • [19:23:35] <jkridner> there are folks working with it on #gst_ti.
  • [19:23:36] <samway> to use the DSP, are most people writing code to the DSP with the GPP or writing a separate program for the DSP?
  • [19:24:12] <jkridner> I'd like to convince them to provide a simple demo that performs an audio filter, an audio source, and an audio sink.
  • [19:24:34] <samway> haha i'd like to help you do that
  • [19:24:40] <jkridner> I think most people write GPP code that inits the DSP.
  • [19:25:44] <samway> cool cool.. that's the goal for this weekend anyway: getting the dsp-link set up
  • [19:26:53] <jkridner|work> Have you tried editing the dsp-link demo apps?
  • [19:27:30] * jkridner|work (~a0321898@nat/ti/x-pxqxthfzhpvfogls) has left #beagle
  • [19:27:54] <samway> demo apps? hah.. not sure how i would have overlooked those
  • [19:28:33] <ds2> jkridner: are you finallyback in this hemisphere?
  • [19:28:38] <jkridner> I am. :)
  • [19:29:21] <samway> i just this last week got started with the beagleboard and haven't come across the dsp-link demos yet
  • [19:29:48] <jkridner> samway: why don't you join me in #gst_ti to continue this discussion. I think there are people there that understand dsp-link a bit more.
  • [19:30:38] <samway> sounds good, i'll head over there
  • [19:30:40] <samway> thank you!
  • [19:47:15] * NishanthMenon (~nmenon@nat/ti/x-yrmetrarxuuugrqk) Quit (Remote host closed the connection)
  • [19:49:43] * GrizzlyAdams (~Grizzly@ip98-184-88-41.mc.at.cox.net) has joined #beagle
  • [19:53:20] * cody_ (~cody@dslb-084-056-105-252.pools.arcor-ip.net) has joined #beagle
  • [19:54:59] * NishanthMenon (~nmenon@nat/ti/x-erhzjijlhnxxhyou) has joined #beagle
  • [19:56:41] * cody (~cody@dslb-084-056-093-021.pools.arcor-ip.net) Quit (Ping timeout: 258 seconds)
  • [20:01:00] * gdm (~gdm@190.173.110.97) has joined #beagle
  • [20:01:13] * cubic1273 (~cubic1272@132.235.16.211) has joined #beagle
  • [20:03:53] <cubic1273> howdy. can anybody recommend a wireless USB device that's relatively easy to get going with this particular board? I noticed the Belkin F5D7050 listed on the shopping list page, but picked one of those up and haven't had much luck
  • [20:06:01] <chakie> hm, this doesn't look good:
  • [20:06:03] <chakie> [ 30.588928] uncorrectable error : <3>end_request: I/O error, dev mtdblock0, sector 88
  • [20:06:07] <chakie> quite a few of those
  • [20:06:11] <chakie> when booting
  • [20:08:34] <samway> cubic1273: are you just looking to get internet connectivity, or do you need wireless specifically?
  • [20:09:07] <cubic1273> samway: wireless specifically, with either ad-hoc or master mode support
  • [20:09:57] <GrizzlyAdams> cubic1273: getting a wireless bridge adapter (Linksys WET610N / WET54G / WET11) and a supported usb ethernet adapter generally works better (even if it costs more)
  • [20:10:31] <samway> cubic1273: fair enough.. i'm afraid i won't be of much help then. i have internet connectivity over USB OTG working, but no wireless
  • [20:10:42] <cubic1273> GrizzlyAdams: didn't think of that. . . I'll look into that. thanks :)
  • [20:11:07] <GrizzlyAdams> you spend about $99 for the WET610N + $30 for an ASIX based adapter, but it works *very* well, without having to rely on the linux rtxxxx drivers, or wpa-supplicant
  • [20:11:40] <GrizzlyAdams> i'm working on getting linksys to release the firmware source for the WET610N, since its linux based.
  • [20:11:54] <cubic1273> samway: no problem. thanks anyway!
  • [20:11:58] * ddompe (~ddompe@201.199.126.31) has joined #beagle
  • [20:17:41] * Barts__ (~Barts@c-76-108-137-30.hsd1.fl.comcast.net) has joined #beagle
  • [20:19:41] * ddompe (~ddompe@201.199.126.31) Quit (Quit: ddompe is leaving)
  • [20:21:13] * Barts_ (~Barts@c-76-108-137-30.hsd1.fl.comcast.net) Quit (Ping timeout: 258 seconds)
  • [20:21:31] * jevin (~jevin@72.12.219.128) has joined #beagle
  • [20:23:11] * _roger_ (~a0740758@nat/ti/x-voufdyimtirvoydk) has joined #beagle
  • [20:24:22] * jpirko (~jirka@ip-89-103-91-23.karneval.cz) Quit (Quit: Leaving)
  • [20:28:13] <chakie> what have i managed to do now? can't unpack the root fs to the sd card
  • [20:28:32] <chakie> tar: ./sbin/swapon: Cannot create symlink to `../bin/busybox': Operation not permitted
  • [20:28:34] <chakie> etc
  • [20:32:55] <chakie> ffs, i make my boot and root partitions wrong fs type
  • [20:33:04] <chakie> my root is vfat and the boot ext3
  • [20:33:06] <chakie> argh!
  • [20:35:07] <chakie> phew, only mounted them wrong
  • [20:38:03] * naeg (~naeg@194.208.239.170) Quit (Ping timeout: 240 seconds)
  • [20:40:08] * [DaiNeko] (~Storekatt@94.145.194.40) has joined #beagle
  • [20:40:48] * [Bigneko] (~Storekatt@94.145.194.40) Quit (Read error: Connection reset by peer)
  • [20:48:06] * cody (~cody@dslb-084-056-099-113.pools.arcor-ip.net) has joined #beagle
  • [20:51:17] <chakie> looking here: http://elinux.org/BeagleBoardBeginners
  • [20:51:25] <chakie> it says to set the booting options:
  • [20:51:31] <chakie> setenv bootcmd 'mmc init;fatload mmc 0 80300000 uImage;bootm 80300000'
  • [20:51:40] * cody_ (~cody@dslb-084-056-105-252.pools.arcor-ip.net) Quit (Ping timeout: 276 seconds)
  • [20:51:46] <chakie> should that be "mmcinit"?
  • [20:51:48] <chakie> as i get:
  • [20:51:49] <_koen_> is that the one that tells you to blow away the uboot env for someting bogus?
  • [20:51:53] * samway (~samway@rrcs-76-79-33-198.west.biz.rr.com) Quit (Ping timeout: 260 seconds)
  • [20:51:54] <_koen_> ah, yes that's the one
  • [20:52:07] <_koen_> don;t do that
  • [20:52:12] * naeg (~naeg@194.208.239.170) has joined #beagle
  • [20:52:18] <chakie> aha, already did
  • [20:52:22] <_koen_> that wiki is has some really dangerous bits inside
  • [20:52:25] <chakie> but it gave an error
  • [20:52:29] <chakie> Hit any key to stop autoboot: 0
  • [20:52:30] <chakie> Usage:
  • [20:52:32] <chakie> mmcinit - init mmc card
  • [20:52:43] <chakie> ** Unable to use mmc 0:1 for fatload **
  • [20:52:44] <chakie> Wrong Image Format for bootm command
  • [20:52:46] <chakie> ERROR: can't get kernel image!
  • [20:52:56] <_koen_> nand erase 260000 20000
  • [20:53:06] <_koen_> that should get you the default env back
  • [20:53:23] <_koen_> with a recent uboot (2009.11 or so) the default env is sane
  • [20:53:39] <chakie> this has an old uboot on it
  • [20:53:45] <chakie> U-Boot 1.3.4-rc2 (Aug 18 2008 - 19:03:08)
  • [20:54:02] * samway (~samway@rrcs-76-79-33-198.west.biz.rr.com) has joined #beagle
  • [20:54:18] <_koen_> heh
  • [20:54:43] <_koen_> grab the one from http://www.angstrom-distribution.org/demo/beagleboard/
  • [20:54:54] <_koen_> 1.3.4 has all the neon bugs unpatches
  • [20:55:19] <chakie> this one is old yes, haven't done any bb stuff for over a year
  • [20:55:45] <chakie> i have those files already on the vfat partition
  • [20:56:07] <chakie> MLO, u-boot.bin and uImage
  • [20:57:40] <armin76> mru: have you seen the patch i made for gcc? now gcc will get built with --with-arch based on your chost :)
  • [20:57:50] <|nfecteD> how do i limit the beagle's RAM use? Damn thing crashes when i try to compile larger programs
  • [20:58:20] <buZz> add swap ;)
  • [20:58:28] <|nfecteD> heh
  • [20:58:36] <buZz> it's what i do
  • [20:58:38] <mru> armin76: no, I haven't seen that one
  • [20:58:51] <|nfecteD> does linux assume there is always swap availble?
  • [20:58:57] <mru> no
  • [20:59:05] <buZz> no, but running out of memory bring on the oomkiller
  • [20:59:06] <armin76> mru: :) ok, so sync up, and if you reemerge gcc you'll have it :)
  • [20:59:13] <buZz> +s
  • [20:59:25] * NishanthMenon (~nmenon@nat/ti/x-erhzjijlhnxxhyou) Quit (Quit: Ex-Chat)
  • [20:59:35] <mru> armin76: it won't really do anything for me
  • [20:59:49] <|nfecteD> wouldn't it just fill up the swap too and then proceed to crash like crazy? :P
  • [20:59:51] <mru> crossdev seems to already do the right magic
  • [21:00:08] <armin76> mru: just in case :)
  • [21:00:44] <mru> and I don't cross-compile gcc
  • [21:01:10] <chakie> there are quite a lot of docs of various quality
  • [21:01:24] <mru> oh wait, --with-arch is the default for -march
  • [21:02:01] <mru> which again makes no difference given I always tell it -mcpu anyway
  • [21:02:10] <buZz> |nfecteD: i would assume you need a certain amount of memory for the job you are running, if mem+swap fits this job, it would have no reason to run the oomkiller
  • [21:02:21] <chakie> i assume the "Booting" docs here aren't good either: http://elinux.org/BeagleBoardAndOpenEmbeddedGit
  • [21:02:59] <chakie> as the "fatload mmc 0:1 0x80300000 uImage" seems to freeze
  • [21:04:17] * jonmasters (~jcm@dallas.jonmasters.org) Quit (Quit: ZNC - http://znc.sourceforge.net)
  • [21:05:29] * jonmasters (~jcm@dallas.jonmasters.org) has joined #beagle
  • [21:05:57] <chakie> hm, the uImage is only 3M, it can't take this long to "fatload" it
  • [21:12:02] <chakie> most operations just freeze
  • [21:18:43] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [21:19:01] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [21:20:58] <GrizzlyAdams> hrm, can't figure out how to get the mtab when procfs isn't mounted on /proc
  • [21:21:37] * serra82 (~5a930193@gateway/web/freenode/x-rsqlhnpzwxmwxdyl) has joined #beagle
  • [21:22:32] <XorA> chakie: that should work
  • [21:22:59] <chakie> XorA: i think the problem was a badly installed sd card
  • [21:23:26] <chakie> XorA: the card reader is not that good
  • [21:23:47] <|nfecteD> rawr! I need to limit RAM usage :/
  • [21:23:55] <|nfecteD> 128MB swap wasn't enough
  • [21:24:45] <|nfecteD> i know i found it when i was poking around with angstrom
  • [21:27:13] * NishanthMenon (~nmenon@nat/ti/x-ecntuelyoftqmpvg) has joined #beagle
  • [21:27:18] <|nfecteD> somewhere there is a file where it now says "unlimited"
  • [21:28:29] <|nfecteD> thats fine and dandy if you have a huge swap partition
  • [21:29:34] * [DaiNeko] (~Storekatt@94.145.194.40) Quit (Quit: Leaving)
  • [21:30:03] <chakie> ah, ok, now it boots
  • [21:31:15] * mlip2 (~mlip2@85-127-149-107.dynamic.xdsl-line.inode.at) Quit (Remote host closed the connection)
  • [21:34:54] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [21:35:10] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [21:39:03] * jconnolly (~jconnolly@firebug.buglabs.net) Quit (Quit: leaving)
  • [21:39:21] * jconnolly (~jconnolly@firebug.buglabs.net) has joined #beagle
  • [21:39:45] <chakie> i need a fairly unstandard resolution for connecting to my projector, is it possible to set own?
  • [21:39:46] * serra82 (~5a930193@gateway/web/freenode/x-rsqlhnpzwxmwxdyl) Quit (Quit: Page closed)
  • [21:40:04] <chakie> looking at the default modes in drivers/video/modedb.c and nothing comes close
  • [21:42:04] <chakie> ok, lots on the mailing list
  • [21:43:50] * kgilmer (~kgilmer@firebug.buglabs.net) Quit (Quit: leaving)
  • [21:46:55] * kgilmer (~kgilmer@firebug.buglabs.net) has joined #beagle
  • [21:49:07] <cubic1273> |nfecteD: are you talking about ulimit?
  • [21:50:29] <|nfecteD> thats it, yes
  • [21:50:45] <|nfecteD> but i just added a 2GB usb stick as swap
  • [21:50:56] <|nfecteD> so that should work
  • [21:51:00] <cubic1273> *nod*
  • [21:52:01] <|nfecteD> maybe one of you guys know... how to set the CPU frequenzy when linux is running?
  • [21:53:51] <chakie> hm, how do i permanently update u-boot? it "reverts" to the old 1.3.4 i had there from ancient times
  • [21:55:27] <XorA> nand erase
  • [21:55:38] <XorA> then write the new one
  • [21:55:53] <chakie> as per the docs here? http://code.google.com/p/beagleboard/wiki/BeagleNANDFlashing
  • [21:56:05] <chakie> i'm sorry for all the stupid questions...
  • [21:56:43] <XorA> cant remember the exact command off hand, but looks about right
  • [21:56:48] <|nfecteD> Think i followed that doc when i flashed my uboot so it should work
  • [21:57:15] * naeg (~naeg@194.208.239.170) Quit (Quit: WeeChat 0.3.1.1)
  • [21:57:33] * cubic1273 (~cubic1272@132.235.16.211) Quit (Remote host closed the connection)
  • [21:58:13] <|nfecteD> Im in here to ask stupid questions too, so...
  • [21:58:37] <ds2> there really isn't a good reason to ugrade uboot unless you are doing something wrong
  • [21:59:06] <chakie> i have this old version:
  • [21:59:08] <chakie> U-Boot 1.3.4-rc2 (Aug 18 2008 - 19:03:08)
  • [21:59:17] * kgilmer (~kgilmer@firebug.buglabs.net) Quit (Quit: leaving)
  • [21:59:24] <chakie> and also:
  • [21:59:26] <chakie> Texas Instruments X-Loader 1.41
  • [21:59:54] * kgilmer (~kgilmer@firebug.buglabs.net) has joined #beagle
  • [22:00:06] <|nfecteD> i guess its fine if you have a rev. C3 or earlier
  • [22:00:28] <chakie> b5
  • [22:00:42] * _don_ (~ddarling@nat/ti/x-hfuozgjcxsaejpzu) Quit ()
  • [22:00:46] <chakie> it says on a small sticker
  • [22:00:50] * kgilmer (~kgilmer@firebug.buglabs.net) Quit (Client Quit)
  • [22:00:55] <ds2> should be fine
  • [22:01:03] <ds2> no good reason to upgrade it if you do sane coding
  • [22:01:11] <chakie> aha
  • [22:01:27] <chakie> i don't plan on doing anything close to rocket science
  • [22:01:35] <ds2> u-boot has one job - get yourkernel into memory and kick it off
  • [22:01:47] * kgilmer (~kgilmer@firebug.buglabs.net) has joined #beagle
  • [22:01:51] <ds2> if you want to overload it forother jobs then, that's your insanity :D
  • [22:02:21] <chakie> heh, no
  • [22:02:26] <|nfecteD> i have a C4 and last i checked there was only one u-boot version i could use
  • [22:02:32] <|nfecteD> if not... NO USB FOR YOU!
  • [22:03:39] <chakie> i'm ultimately trying to get a fb mode 854x480 running that would give me a pixel perfect for my projector
  • [22:04:36] <ds2> that's cuz U-boot is turning things on for you
  • [22:04:51] <ds2> if you or someone want to write the regulator init code in the kernel....
  • [22:05:18] <ds2> chakie: which projector is 854x480?
  • [22:05:22] <chakie> ok, so uboot isn't something where newer is always better
  • [22:05:30] <chakie> ds2: an optoma h30a
  • [22:05:51] <chakie> not exactly a standard resolution
  • [22:06:25] <ds2> big
  • [22:06:32] <ds2> actually, it is standard resolution
  • [22:06:58] <GrizzlyAdams> looks like the beagle mailing list is being scraped by eval board manufacturers for emails to send spam to
  • [22:07:22] <chakie> ds2: well, i've never seen it before in use
  • [22:07:31] <ds2> GrizzlyAdams: must be new... or they use known spam addrs
  • [22:07:41] <ds2> chakie: you can find surplus LCD panels in that resolution
  • [22:07:42] <chakie> but at least a normal xorg on a desktop system handles it ok
  • [22:07:56] <chakie> well, i guess that's good
  • [22:08:11] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [22:08:51] * _don_ (~ddarling@nat/ti/x-mbfkqmlguxovmtyx) has joined #beagle
  • [22:09:47] <ds2> wonder if there is a chipcon channel
  • [22:10:46] <chakie> setting the resolution didn't seem to be a simple "omap-dss.def_disp=lcd omapfb.video_mode=854x480MR-24@60" addition to bootargs
  • [22:11:04] <chakie> fbset at least still said 640x480@59
  • [22:11:06] <ds2> you need to muck with the db
  • [22:11:36] <ds2> those modes are a bad idea that does a good job of confusing people
  • [22:11:46] <chakie> i guess
  • [22:12:54] <chakie> i guess db == drivers/video/modedb.c
  • [22:15:20] <ds2> yes
  • [22:17:50] * rcranetx (~rcranetx@nat/ti/x-uqrxcbrmvxrvpvly) Quit (Quit: Leaving.)
  • [22:18:00] * ant__ (~andrea@host1-50-dynamic.5-87-r.retail.telecomitalia.it) has joined #beagle
  • [22:19:05] <chakie> [ 0.000000] Unknown boot option `omap-dss.def_disp=lcd': ignoring
  • [22:19:06] <chakie> [ 0.000000] Unknown boot option `omapfb.video_mode=854x480MR-24@60': ignoring
  • [22:20:04] <|nfecteD> omapfb.mode=dvi:1280x720MR-16@60' <--- maybe you need to use that instead
  • [22:20:06] * mobidev (~mobidev@94.127.205.30) Quit (Quit: I go offline...)
  • [22:20:26] <|nfecteD> omapfb.mode=dvi:854x480MR-24@60'
  • [22:20:29] <|nfecteD> in your case
  • [22:20:39] <|nfecteD> i don't know when that bootarg got changed
  • [22:20:40] <chakie> the first was also unknown
  • [22:20:57] <|nfecteD> but thats defined in the dvi
  • [22:21:07] <|nfecteD> right before the resolution
  • [22:21:18] <chakie> aha, yes
  • [22:21:21] <|nfecteD> atleast thats how it is in my uboot
  • [22:21:23] <|nfecteD> try it
  • [22:21:25] <|nfecteD> might work
  • [22:21:31] <chakie> the kernel is 2.6.29-omap1
  • [22:21:32] <chakie> yup
  • [22:21:36] * jconnolly is now known as jconnolly|away
  • [22:22:24] * jacques (~6217fec1@nslu2-linux/jacques) has joined #beagle
  • [22:23:23] <chakie> it's not happy
  • [22:23:29] <|nfecteD> :/
  • [22:23:38] <|nfecteD> but did it accept the bootarg?
  • [22:23:40] <chakie> [ 818.929809] clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000
  • [22:23:41] <chakie> [ 818.936706] clock: new_div = 9, new_rate = 48000000
  • [22:23:43] <chakie> [ 818.944885] omapdss DISPC error: SYNC_LOST, disabling LCD
  • [22:23:56] <|nfecteD> whoops
  • [22:24:08] * |nfecteD sits in the corner
  • [22:26:00] <chakie> no errors about the bootargs at least
  • [22:26:26] <chakie> i saw something scroll by before the errors above filled my scrollback
  • [22:26:38] <chakie> the resolution used seemed to have been 848x480
  • [22:27:27] * _don_ (~ddarling@nat/ti/x-mbfkqmlguxovmtyx) Quit ()
  • [22:27:37] * rhk (~rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) Quit (Quit: ChatZilla 0.9.86 [Firefox 3.5.8/20100202165920])
  • [22:27:43] <chakie> [ 27.379333] fbcvt: Aspect ratio not CVT standard
  • [22:27:44] <chakie> [ 27.384002] fbcvt: 848x480@60: CVT Name - Not a CVT standard - 0.407 Mega Pixel Image
  • [22:28:01] <|nfecteD> and im guessing a "standard" resolution like 800x600 would work?
  • [22:28:16] <chakie> sure, but i don't want scaling
  • [22:28:43] <chakie> i want it 1:1 with the projector resolution
  • [22:30:01] <|nfecteD> then one of the guru's in here have to help
  • [22:30:11] <|nfecteD> im a beaglen00b myself
  • [22:30:21] <|nfecteD> and i run boring standard resolutions
  • [22:31:25] <Ceriand|work> anyone have any experience on running CCSv4 on Win 7 with a XDS100v2 successfully?
  • [22:32:03] <chakie> i assume the solution is to try to create an own mode
  • [22:32:16] * _don_ (~ddarling@nat/ti/x-nouywjaydshteolz) has joined #beagle
  • [22:32:17] <chakie> but that code is deep, deep rocket magic
  • [22:32:34] <chakie> and i don't want to damage my projector
  • [22:37:46] <buZz> chakie: what kind of projector is that?
  • [22:38:19] <chakie> buZz: an optoma h30a
  • [22:41:21] <buZz> weird resolution man :)
  • [22:48:00] * jevin (~jevin@72.12.219.128) Quit (Remote host closed the connection)
  • [22:49:29] * samway (~samway@rrcs-76-79-33-198.west.biz.rr.com) Quit (Quit: samway)
  • [22:49:51] <chakie> <ds2> actually, it is standard resolution
  • [22:50:16] <chakie> i have an xorg modeline that works with it
  • [22:50:43] <chakie> i guess translating that to a modedb.c entry is doable
  • [22:51:47] <chakie> well, enough for one evening
  • [22:52:01] <chakie> good night and thank you for the help
  • [23:14:26] * rcranetx (~rcranetx@nat/ti/x-kderjzicelmckmzx) has joined #beagle
  • [23:16:13] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) Quit (Ping timeout: 265 seconds)
  • [23:19:48] * scruggs (~scruggs@72-161-108-247.dyn.centurytel.net) Quit (Quit: This computer has gone to sleep)
  • [23:26:28] * robtow (~rob@dsl092-218-034.sfo2.dsl.speakeasy.net) Quit (Remote host closed the connection)
  • [23:29:22] * jrmuizel (~jrmuizel@mozca02.ca.mozilla.com) Quit (Quit: jrmuizel)
  • [23:29:33] * tehpola (~Adium@cpe-66-25-181-164.austin.res.rr.com) has joined #beagle
  • [23:32:54] * alecrim (~alecrim@189.2.128.130) Quit (Quit: Leaving)
  • [23:33:08] * raster (~raster@enlightenment/developer/raster) has joined #beagle
  • [23:41:47] * rcn-ee (~voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [23:44:02] * kmargar (~markos@athedsl-423160.home.otenet.gr) has joined #beagle
  • [23:44:25] * markos_ is now known as Guest59993
  • [23:44:31] * kmargar is now known as markos_
  • [23:44:34] * ant__ (~andrea@host1-50-dynamic.5-87-r.retail.telecomitalia.it) Quit (Quit: Leaving)
  • [23:47:09] * Guest59993 (~markos@athedsl-432284.home.otenet.gr) Quit (Ping timeout: 240 seconds)
  • [23:56:42] * BThompson (~a0193480@nat/ti/x-ofzntitnhbozpvoc) Quit (Read error: Connection reset by peer)
  • [23:57:14] * tlab (~tlab@c-69-243-187-136.hsd1.in.comcast.net) has joined #beagle
  • [23:59:56] * gdm (~gdm@190.173.110.97) Quit (Remote host closed the connection)