• [00:00:31] * davidm1 (n=David@nat/ti/x-vbjmwhzsqrjzieud) Quit (Remote closed the connection)
  • [00:01:14] * j_ack_ (n=j_ack@p57A428A4.dip0.t-ipconnect.de) Quit ("Verlassend")
  • [00:01:29] * j_ack (n=j_ack@p57A428A4.dip0.t-ipconnect.de) has joined #beagle
  • [00:03:12] * mikhas (n=mikhas@79.194.47.194) Quit ("Ex-Chat")
  • [00:04:35] <kblin> cwillu_at_work: I know, though support for beagle-specific problems there is a bit limited :)
  • [00:04:57] <cwillu_at_work> kblin, beagle specific problems don't tend to be distro specific
  • [00:05:19] <cwillu_at_work> and to the extent they are, it's easy enough to run a different kernel
  • [00:05:31] <kblin> so when you're unsure if the problem you're running into are distro specific or hardware specific, it's fun to work out where to get help
  • [00:06:21] <kblin> of course it's easy enough to keep an sd-card with angstrom around to test if the problem exists there as well
  • [00:07:11] * prpplague (n=dave123_@ppp-70-249-153-7.dsl.rcsntx.swbell.net) has joined #beagle
  • [00:07:36] <bobo1on1> or back up the sd card
  • [00:08:09] <cwillu_at_work> or back up the uimage...
  • [00:08:12] <crashovrd> is there a place to get up to date Angstrom builds?
  • [00:08:15] <crashovrd> binaries
  • [00:12:05] * pmeerw__ (n=pmeerw@mail.commend.com) Quit (Read error: 110 (Connection timed out))
  • [00:12:33] * pmeerw__ (n=pmeerw@mail.commend.com) has joined #beagle
  • [00:13:20] <bobo1on1> I got mine from http://www.angstrom-distribution.org/demo/beagleboard/
  • [00:14:13] * AndrevS is now known as andrevs
  • [00:21:10] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [00:22:03] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [00:22:13] <bobo1on1> anyone tried the video acceleration with gstreamer?
  • [00:23:17] * felipec (n=felipec@a91-153-253-80.elisa-laajakaista.fi) Quit ("Ex-Chat")
  • [00:24:18] * rsalveti (n=rsalveti@187.59.114.100) has joined #beagle
  • [00:29:00] * florian (n=fuchs@Maemo/community/contributor/florian) Quit (Remote closed the connection)
  • [00:30:58] * SoulBlade (n=Classifi@12.173.51.158) Quit ()
  • [00:35:02] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [00:36:41] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [00:38:59] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:48:52] * scampa (i=4bc07e2e@gateway/web/freenode/x-glwzhpiiitzsjgke) Quit (kornbluth.freenode.net irc.freenode.net)
  • [00:50:52] * scampa (i=4bc07e2e@gateway/web/freenode/x-glwzhpiiitzsjgke) has joined #beagle
  • [00:52:14] * bobo1on1 (n=bob@xbmc/staff/bob) Quit (Read error: 60 (Operation timed out))
  • [00:52:38] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) has joined #beagle
  • [00:53:46] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) Quit ("Leaving.")
  • [00:57:06] * Ragha (n=Ragha@nat/ti/x-ibrdojwqvwkwzqly) Quit (Remote closed the connection)
  • [01:05:46] * scampa (i=4bc07e2e@gateway/web/freenode/x-glwzhpiiitzsjgke) Quit (Ping timeout: 180 seconds)
  • [01:05:56] * thaytan (n=jan@CPE-123-211-107-188.lnse4.cha.bigpond.net.au) has joined #beagle
  • [01:06:51] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [01:07:47] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [01:09:52] * rcn-ee (n=voodoo@thief-pool1-30.mncable.net) Quit (Read error: 104 (Connection reset by peer))
  • [01:10:45] * Underdog_ (i=50cad425@gateway/web/freenode/x-jjtyaluxkhmhlbza) has joined #beagle
  • [01:11:43] * Underdog_ (i=50cad425@gateway/web/freenode/x-jjtyaluxkhmhlbza) Quit (Client Quit)
  • [01:14:59] * Openfree` (n=Openfree@116.228.88.98) has joined #beagle
  • [01:18:54] * poppy_nogood (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) Quit (Remote closed the connection)
  • [01:20:03] * poppy_nogood (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) has joined #beagle
  • [01:27:11] * poppy_nogood (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) Quit (Remote closed the connection)
  • [01:27:23] * poppy_nogood (n=rthc@rrcs-67-52-50-170.west.biz.rr.com) has joined #beagle
  • [01:27:36] * rcn-ee (n=voodoo@thief-pool1-30.mncable.net) has joined #beagle
  • [01:28:09] * CruNcher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) has joined #beagle
  • [01:28:50] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) Quit ("Leaving.")
  • [01:31:34] * ffdddddddddddddd (i=48367172@gateway/web/freenode/x-qgsihedprmedbtya) has joined #beagle
  • [01:32:42] * ffdddddddddddddd (i=48367172@gateway/web/freenode/x-qgsihedprmedbtya) Quit (Client Quit)
  • [01:33:06] * Cru_N_cher (n=luls_lol@dslb-084-058-191-034.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [01:41:03] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [01:46:11] * RoHS (n=cruxphot@c-71-237-33-118.hsd1.co.comcast.net) has joined #Beagle
  • [01:49:57] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 110 (Connection timed out))
  • [01:50:41] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [01:54:26] * Yuvie (n=yuvi@d-69-161-90-167.cpe.metrocast.net) has joined #beagle
  • [01:56:18] * pH5 (n=ph5@e178218022.adsl.alicedsl.de) Quit ("bye")
  • [01:58:10] * Ceriand|desktop1 (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [02:11:31] * pfoetchen (n=pfoetche@dslb-188-099-094-236.pools.arcor-ip.net) Quit ("Lost terminal")
  • [02:12:17] * pfoetchen (n=pfoetche@dslb-188-099-094-236.pools.arcor-ip.net) has joined #beagle
  • [02:12:46] * Yuvi (n=yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Read error: 110 (Connection timed out))
  • [02:12:46] * Yuvie is now known as Yuvi
  • [02:13:29] * Ceriand|desktop (n=Ceriand@unaffiliated/ceriand) Quit (Read error: 110 (Connection timed out))
  • [02:16:55] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:34:00] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit ()
  • [02:42:01] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 60 (Operation timed out))
  • [02:44:33] * robtow (n=robtow@dsl092-218-034.sfo2.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))
  • [02:46:56] * bazbell (n=bazbell@nat/ti/x-fxntycxlmkvctkss) has joined #beagle
  • [02:51:19] * JoeSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [02:55:27] * thaytan (n=jan@CPE-123-211-107-188.lnse4.cha.bigpond.net.au) Quit ("Ex-Chat")
  • [02:55:50] * RoHS (n=cruxphot@c-71-237-33-118.hsd1.co.comcast.net) has left #Beagle
  • [02:59:02] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [03:02:34] * __alanc__ (n=a-campbe@nat/ti/x-ovaxpvavhgyukxvo) has joined #beagle
  • [03:14:08] * crwper (n=crwper@d66-222-226-176.abhsia.telus.net) has joined #beagle
  • [03:17:03] * djlewis (n=djlewis@65-70-11-236.dsl.tcworks.net) has joined #beagle
  • [03:19:38] * cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) Quit (Read error: 110 (Connection timed out))
  • [03:27:57] * bazbell (n=bazbell@nat/ti/x-fxntycxlmkvctkss) has left #beagle
  • [03:37:07] * djlewis (n=djlewis@65-70-11-236.dsl.tcworks.net) Quit (Read error: 110 (Connection timed out))
  • [03:38:16] * Yuvi (n=yuvi@d-69-161-90-167.cpe.metrocast.net) Quit ()
  • [03:41:20] <Barts_> does anyone have zigbee working on the BB?
  • [03:43:01] * Yuvi (n=yuvi@d-69-161-90-167.cpe.metrocast.net) has joined #beagle
  • [03:50:45] * j_ack_ (n=j_ack@p57A428BE.dip0.t-ipconnect.de) has joined #beagle
  • [03:51:42] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [03:52:16] * JoeSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [03:53:46] * j_ack (n=j_ack@p57A428A4.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
  • [03:54:02] * virals1 (n=viral@122.167.114.104) Quit (Read error: 110 (Connection timed out))
  • [04:01:50] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [04:05:49] * cody__ (n=cody@dslb-084-056-067-117.pools.arcor-ip.net) has joined #beagle
  • [04:07:50] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit ()
  • [04:10:31] * Vivek_ (i=7aa6618f@gateway/web/freenode/x-miichwfebrlyhzma) has joined #beagle
  • [04:11:52] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [04:12:52] * rach (i=7bed0457@gateway/web/freenode/x-hfuyuktiimcfvjmm) has joined #beagle
  • [04:12:54] * Vivek_ (i=7aa6618f@gateway/web/freenode/x-miichwfebrlyhzma) Quit (Client Quit)
  • [04:20:49] * cody_ (n=cody@dslb-084-056-126-021.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [04:24:45] * __alanc__ (n=a-campbe@nat/ti/x-ovaxpvavhgyukxvo) Quit (Remote closed the connection)
  • [04:26:44] * gdm_ (n=gdm@190.173.113.164) has joined #beagle
  • [04:27:22] * j_ack_ (n=j_ack@p57A428BE.dip0.t-ipconnect.de) Quit ("Verlassend")
  • [04:28:03] * GPSFan (n=kenm@64.92.145.112) Quit ("Ex-Chat")
  • [04:38:12] * virals (n=Viral_Sa@122.166.2.35) Quit (Read error: 60 (Operation timed out))
  • [04:38:57] * virals (n=Viral_Sa@59.97.0.99) has joined #beagle
  • [04:40:34] * soman (n=somnath@118.102.130.6) has joined #beagle
  • [04:50:47] * rach (i=7bed0457@gateway/web/freenode/x-hfuyuktiimcfvjmm) Quit (Ping timeout: 180 seconds)
  • [04:56:20] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [04:59:16] * wandern (n=wandern@c-67-184-9-62.hsd1.il.comcast.net) has joined #beagle
  • [04:59:28] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [05:07:46] * pfoetche1 (n=pfoetche@188.105.237.223) has joined #beagle
  • [05:20:24] * pfoetchen (n=pfoetche@dslb-188-099-094-236.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [05:22:31] * wandern (n=wandern@c-67-184-9-62.hsd1.il.comcast.net) Quit (Remote closed the connection)
  • [05:22:37] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [05:24:05] * saurabh (i=7bece654@gateway/web/freenode/x-sqrcmojrswbmkvjn) has joined #beagle
  • [05:26:31] * Aditya1 (n=Aditya@c-69-143-196-44.hsd1.md.comcast.net) has joined #beagle
  • [05:26:56] <Aditya1> anyone work with IMGLIB for OMAP3530?
  • [05:27:02] * Nilly (i=744a7969@gateway/web/freenode/x-juompdlquptggtha) has joined #beagle
  • [05:30:43] * tejas (i=744a7969@gateway/web/freenode/x-gvsfeiltfpwqquzf) has joined #beagle
  • [05:31:06] <tejas> hello all
  • [05:31:28] <tejas> i would like to install gst-player on beagle board
  • [05:31:45] <tejas> can anyone guide me how can i do the same?
  • [05:32:25] <saurabh> hi tejas bhanabhagwanwal
  • [05:32:41] * GrizzlyAdams (n=Grizzly@ip68-230-167-28.mc.at.cox.net) has joined #beagle
  • [05:33:41] * chainsawbike (n=chainsaw@121-73-114-254.cable.telstraclear.net) Quit (Read error: 60 (Operation timed out))
  • [05:34:07] <tejas> hi saurabh
  • [05:34:21] <tejas> is your set up working?
  • [05:34:28] <saurabh> not
  • [05:34:44] <saurabh> just working on that only
  • [05:36:39] * chainsawbike (n=chainsaw@121-73-114-254.cable.telstraclear.net) has joined #beagle
  • [05:43:02] <tejas> i would like to install gst-player on beagle board. can anyone guide me how can i do the same?
  • [06:05:41] * mrc3_ (n=mrc3@nat/ti/x-qqnjchzuqaaiowwx) Quit (Remote closed the connection)
  • [06:06:30] * mrc3_ (n=mrc3@nat/ti/x-vqehrxjqbfwnpjiq) has joined #beagle
  • [06:07:44] * ssvb (n=ssvb___@a88-112-120-50.elisa-laajakaista.fi) Quit (Remote closed the connection)
  • [06:12:35] <GrizzlyAdams> note: please stop going to sparkfun.com, all you folks trying to exploit freeday have already failed, and are just killing the server farm
  • [06:13:16] <GrizzlyAdams> (freeday doesn't start till 9am mountain standard0
  • [06:15:39] * pfoetche1 (n=pfoetche@188.105.237.223) Quit (Read error: 104 (Connection reset by peer))
  • [06:17:17] <crashovrd> how am i supposed to know what that is unless i go to it?
  • [06:17:26] <GrizzlyAdams> heh
  • [06:17:41] <av500> GrizzlyAdams: reverse psychology, you just made me go there :)
  • [06:17:52] <crashovrd> so what is it?
  • [06:18:07] <av500> btw, if it locks up before "freeday", how will it handle "freeday"? :)
  • [06:18:12] <GrizzlyAdams> sparkfun is giving away $100,000
  • [06:18:17] <crashovrd> i generally associate sparks with bad things, not fun things
  • [06:18:20] <GrizzlyAdams> (of stuff)
  • [06:20:37] * pfoetchen (n=pfoetche@188.105.237.223) has joined #beagle
  • [06:24:56] * crwper (n=crwper@d66-222-226-176.abhsia.telus.net) Quit (Remote closed the connection)
  • [06:35:20] <Aditya1> yeah but I can't get on their site
  • [06:35:21] * rcn-ee (n=voodoo@thief-pool1-30.mncable.net) Quit (Read error: 54 (Connection reset by peer))
  • [06:35:26] <Aditya1> its been slow as hell all day
  • [06:36:39] <Barts_> anyone have zigbee working on the BB?
  • [06:37:41] <av500> zigbbb?
  • [06:39:39] <Barts_> zigbee...or xbee
  • [06:40:47] * srv (i=7aa75883@gateway/web/freenode/x-uticqvtcwwixhjay) has joined #beagle
  • [06:43:04] * GrizzlyAdams (n=Grizzly@ip68-230-167-28.mc.at.cox.net) Quit (Read error: 104 (Connection reset by peer))
  • [06:43:14] <Barts_> how about wine on the BB?
  • [06:43:23] * pfoetchen (n=pfoetche@188.105.237.223) Quit ("leaving")
  • [06:48:33] * rsalveti (n=rsalveti@187.59.114.100) Quit (Read error: 113 (No route to host))
  • [06:51:12] <tejas> is there any media player available for beagle board based on G-Streamer architecture
  • [06:51:28] <tejas> please give me some links also
  • [06:53:35] * saurabh (i=7bece654@gateway/web/freenode/x-sqrcmojrswbmkvjn) Quit ("Page closed")
  • [06:54:25] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [06:57:38] <Aditya1> I thought mplayer used gstreamer
  • [06:57:52] <Barts_> tejas: gstream should have a few apps that come with the package
  • [07:02:38] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) Quit (Read error: 54 (Connection reset by peer))
  • [07:11:51] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit ()
  • [07:16:27] <av500> mplayer is not gst based
  • [07:19:27] * bearsh|work (n=quassel@inst-232.42.zhaw.ch) has joined #beagle
  • [07:21:56] * killring (n=killring@adsl-76-226-98-221.dsl.sfldmi.sbcglobal.net) Quit ()
  • [07:27:06] * Nilly (i=744a7969@gateway/web/freenode/x-juompdlquptggtha) Quit (Ping timeout: 180 seconds)
  • [07:38:48] * tejas (i=744a7969@gateway/web/freenode/x-gvsfeiltfpwqquzf) Quit (Ping timeout: 180 seconds)
  • [08:06:01] * srv (i=7aa75883@gateway/web/freenode/x-uticqvtcwwixhjay) Quit (Ping timeout: 180 seconds)
  • [08:20:33] * jserv-- (n=jserv@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [08:30:29] * tejas (i=744a7969@gateway/web/freenode/x-kjarlymcfieplbht) has joined #beagle
  • [08:30:52] <tejas> Hello All
  • [08:31:16] <tejas> I would like to run gst-player application on beagle board.
  • [08:31:30] <tejas> Can anyone guide me on the same?
  • [08:39:22] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [08:40:13] * BDavid (n=blurgs@nat/ti/x-qpauedutwcemnzuy) has joined #beagle
  • [08:43:15] * courville (n=courvill@archos.rain.fr) has joined #beagle
  • [08:43:53] * ant_work (n=chatzill@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
  • [08:49:29] * jpsaman (n=jpsaman@videolan/developer/jpsaman) has joined #beagle
  • [08:54:00] * RobertB (n=robert@87.151.46.68) Quit ("Leaving")
  • [08:54:24] * Phrog (n=chatzill@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [08:56:25] * robtow (n=robtow@64.62.142.114) has joined #beagle
  • [08:58:42] * _koen_1 (n=x0115699@nat/ti/x-vhmkcmeeqwjniyah) has joined #beagle
  • [08:58:58] * ynezz_ (n=ynezz@195.113.105.19) has joined #beagle
  • [08:59:08] <jackman> Is anyone watching the clone thread?
  • [09:00:11] * ynezz_ (n=ynezz@195.113.105.19) Quit (Client Quit)
  • [09:02:00] <av500> sure, even got popcorn
  • [09:03:07] * gaurang (i=7becfcb5@gateway/web/freenode/x-hdukuxygfmgvysxo) has joined #beagle
  • [09:03:32] <jackman> how close is he?
  • [09:03:40] <jackman> sounds like he's just in the planning stage
  • [09:03:56] <gaurang> hello, i will be plan to use opengl es on beagleboard
  • [09:04:04] <av500> jackman: sounds so
  • [09:04:27] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [09:04:27] <jackman> i'm really impressed with the beagle guys -- they planned, designed, produced, and made a market for the product
  • [09:04:37] <jackman> the only one that i see that even comes close is the hawkboard
  • [09:04:39] <av500> jackman: I'd say he is in the dreaming stage
  • [09:04:46] <jackman> lol
  • [09:04:58] <jackman> have you seen the hawkbaord or leopardboard?
  • [09:05:12] <gaurang> how to use that
  • [09:05:25] <av500> sure
  • [09:05:46] <gaurang> qt require for opengl es?
  • [09:06:02] <jackman> i don't know anything about opengl. :(
  • [09:06:03] <av500> gaurang: no
  • [09:07:23] * _koen_ (n=x0115699@nat/ti/x-tjcfructiplbzsjl) Quit (Remote closed the connection)
  • [09:07:28] <jackman> sorry, bud.
  • [09:07:42] <gaurang> I compile sample application successfully,but I could'nt run application on beagleboard
  • [09:08:07] <jackman> I don't even have a board. I'm dreaming of having one.
  • [09:08:27] <jackman> I settled for a hawkboard. They're being shipped now.
  • [09:09:46] <jackman> http://designsomething.org/leopardboard/default.aspx
  • [09:09:52] <jackman> http://www.hawkboard.org/
  • [09:14:01] * robtow (n=robtow@64.62.142.114) Quit (Remote closed the connection)
  • [09:14:59] <tejas> Hello All
  • [09:15:10] <tejas> I would like to run gst-player application on beagle board.
  • [09:15:11] <jackman> Hello You
  • [09:15:19] <tejas> Can anyone guide me on the same?
  • [09:15:33] <jackman> I fold.
  • [09:15:50] <tejas> i can easily compile and run it on fedora 11
  • [09:16:06] <_koen_1> tejas: opkg install gst-player works for me
  • [09:16:37] <gaurang> when I run opengl es sample application, i got error like:"Exit message has been set to:"PVRShell:Unable to create surface "."
  • [09:16:42] <tejas> can you provide me proper steps to compile and run
  • [09:17:06] <gaurang> "InitAPI failed!"
  • [09:17:51] <tejas> koen : i am using Codesourcery compiler to run my gstreamer applications
  • [09:19:02] <_koen_1> tejas: install OE, use angstrom, bitbake gst-player, copy over the ipk, install it, run it
  • [09:19:29] <Barts_> koen: have you heard of zigbee successfully working on BB?
  • [09:19:43] * _koen_ (n=x0115699@nat/ti/x-dsjocriboqgfhase) has joined #beagle
  • [09:19:44] <tejas> i was using scratchbox to compile gstreamer and its plugins
  • [09:20:04] <tejas> i never used OE
  • [09:20:32] <tejas> koen when i try to compile gst-player it gives me dependencies error like gtk
  • [09:21:03] <tejas> after that when i try to compile gtk+ , it gives me dependencies error like atk, pango and cairo
  • [09:21:05] * Phrog (n=chatzill@ip-87-82-198-210.easynet.co.uk) Quit ("ChatZilla 0.9.86 [Firefox 3.5.6/20091201220228]")
  • [09:22:11] <_koen_> that's what you get if you use a build tool without dependency tracking
  • [09:23:19] <av500> tejas: so resolve all dependencies and you are done :)
  • [09:24:36] <tejas> one more question. If i use latest angstrom image, does it include gst-player application inbuilt?
  • [09:26:10] * _koen_1 (n=x0115699@nat/ti/x-vhmkcmeeqwjniyah) Quit (Remote closed the connection)
  • [09:27:09] * hrw|gone is now known as hrw
  • [09:27:14] <hrw> morning
  • [09:27:18] * robtow (n=robtow@64.62.142.114) has joined #beagle
  • [09:27:22] <gaurang> i am using codesourcery compiler for opengl es demo application
  • [09:27:26] <jackman> morning!
  • [09:32:48] * vindolin (n=vindolin@212.6.136.34) has joined #beagle
  • [09:34:30] * bswix (n=rode@147.84-49-231.nextgentel.com) has joined #beagle
  • [09:41:22] * hansdampf (n=moritz@campus-auth001.fh-regensburg.de) has joined #beagle
  • [09:52:12] * robtow (n=robtow@64.62.142.114) Quit (Read error: 110 (Connection timed out))
  • [10:05:28] * mikhas (n=mikhas@85.183.48.167) has joined #beagle
  • [10:14:13] * jpirko (n=jirka@nat/redhat/x-lucfiphyepdfpday) has joined #beagle
  • [10:16:14] * like2wise (n=like2wis@84-106-116-232.cable.quicknet.nl) has joined #beagle
  • [10:18:01] * like2wise (n=like2wis@84-106-116-232.cable.quicknet.nl) Quit (Client Quit)
  • [10:24:34] * rach (i=7bed0457@gateway/web/freenode/x-jacfypkjhpnbjsfz) has joined #beagle
  • [10:25:09] * Openfree` (n=Openfree@116.228.88.98) Quit (Read error: 54 (Connection reset by peer))
  • [10:26:01] <rach> How to configure OpenGL ES for Beagleboard which works on Angstrom kernel?
  • [10:27:24] <_koen_> opkg install omap3-sgx-modules libgles-omap3
  • [10:27:43] <_koen_> then install and run your favourite gles app (e.g. quake3 from the angstrom feeds)
  • [10:30:07] <rach> I am looking to build application which uses OpenGL ES api, on Ubuntu/Fedora Desktop PC?
  • [10:30:15] * cbrake (n=cbrake@oh-69-34-21-229.sta.embarqhsd.net) has joined #beagle
  • [10:33:30] * hansdampf (n=moritz@campus-auth001.fh-regensburg.de) Quit (Read error: 104 (Connection reset by peer))
  • [10:34:23] * jserv-- (n=jserv@61-30-10-70.static.tfn.net.tw) Quit (Remote closed the connection)
  • [10:36:11] * Jeff__ (i=43afd202@gateway/web/freenode/x-wlcyslzehkkvovsh) has joined #beagle
  • [10:36:50] * Jeff__ (i=43afd202@gateway/web/freenode/x-wlcyslzehkkvovsh) Quit (Client Quit)
  • [10:40:54] <jackman> so...
  • [10:41:01] <jackman> is anyone watching freeday on sparkfun?
  • [10:43:35] <hrw> jackman: I was thinking about it
  • [10:45:57] * tejas (i=744a7969@gateway/web/freenode/x-kjarlymcfieplbht) Quit (Ping timeout: 180 seconds)
  • [10:46:02] <jackman> i'm assuming that the boards they sell would be from the new shipment...
  • [10:48:58] <jackman> holy cow
  • [10:49:04] <jackman> the sparkfun irc is loaded
  • [10:51:47] <hrw> but shipping costs to outside of US are not low
  • [10:52:18] <hrw> http://www.sparkfun.com/commerce/product_info.php?products_id=9115 would be nice addon for my BB expansion board
  • [10:53:59] <jackman> lol
  • [10:54:06] <jackman> i'm not worried about shipping out of the us
  • [10:54:14] <jackman> i'm mostly just curious what revision they'll be
  • [10:54:25] <jackman> but, like i said, they're backordered and will probably be c4
  • [10:54:37] <jackman> i'll be waiting like everyone else. :)
  • [10:55:02] <hrw> I do not need BB
  • [10:57:41] <av500> most ppl want AAA
  • [10:57:43] <av500> :)
  • [11:01:17] <jackman> AAA is better than AA, certainly
  • [11:01:42] <jackman> but some just need AA more than BB or AAA.
  • [11:03:33] * JoeSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [11:13:46] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [11:15:46] * Entasis (n=Jarred@ppp118-210-72-144.lns20.adl2.internode.on.net) has joined #beagle
  • [11:19:32] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [11:21:56] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [11:27:54] * Ceriand|desktop1 (n=Ceriand@unaffiliated/ceriand) Quit ("Leaving.")
  • [11:31:35] * gaurang (i=7becfcb5@gateway/web/freenode/x-hdukuxygfmgvysxo) Quit ("Page closed")
  • [11:33:47] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [11:35:30] * bswix (n=rode@147.84-49-231.nextgentel.com) Quit (Remote closed the connection)
  • [11:52:01] * JoeSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [11:55:05] * hansdampf (n=moritz@campus-auth001.fh-regensburg.de) has joined #beagle
  • [11:55:18] <hansdampf> hi there
  • [11:55:38] <hansdampf> just forget how to initialize the bzr repository an my board
  • [11:55:57] <hansdampf> ubuntu@beagleboard:~/kernel$ bzr init lp:~beagleboard-kernel/+junk/2.6-stablebzr: ERROR: Transport operation not possible: readonly transport
  • [12:18:44] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Remote closed the connection)
  • [12:24:42] * PuffTheMagic_ (n=quassel@unaffiliated/puffthemagic) has joined #beagle
  • [12:25:31] * PuffTheMagic (n=quassel@unaffiliated/puffthemagic) Quit (Read error: 104 (Connection reset by peer))
  • [12:31:17] * hansdampf (n=moritz@campus-auth001.fh-regensburg.de) Quit (Read error: 110 (Connection timed out))
  • [12:33:50] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [12:37:04] <mru> _koen_: http://www.youtube.com/watch?v=-TC2xTCb_GU
  • [12:41:51] <_koen_> :D
  • [12:41:57] * DJWillis (i=djwillis@82-46-19-72.cable.ubr02.bath.blueyonder.co.uk) has joined #beagle
  • [12:47:48] <mru> _chase_: ^^ for you too ;-)
  • [12:50:33] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [12:51:01] <av500> wow, this guy can even hit a watermelon, i am impressed
  • [12:51:57] <mru> but he can't hit a car with an rpg
  • [12:52:16] <mru> guys like that are a good reason to have strict gun laws
  • [12:53:32] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) Quit ("??????")
  • [12:55:42] <_chase_> mru: Nice video. My AR-15 doesn't have an rpg :(
  • [12:55:49] <_chase_> Maybe I need to pick one up :)
  • [12:56:09] <mru> are they legal in texas?
  • [12:56:19] <_chase_> no
  • [12:56:22] <mru> that video was apparently shot in cambodia, where most things are legal
  • [12:56:28] <_chase_> but it would be cool
  • [12:58:05] <av500> mru: prolly not "legal" but "who cares"
  • [12:59:07] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) has joined #beagle
  • [13:02:30] * rach (i=7bed0457@gateway/web/freenode/x-jacfypkjhpnbjsfz) has left #beagle
  • [13:03:17] * RoHS (n=cruxphot@c-71-237-33-118.hsd1.co.comcast.net) has joined #Beagle
  • [13:06:03] * RoHS (n=cruxphot@c-71-237-33-118.hsd1.co.comcast.net) Quit (Client Quit)
  • [13:09:31] <Crofton> The NRA should arrange honary US citizenship for that guy
  • [13:12:58] * Openfree|H (n=Openfree@222.65.62.165) has joined #beagle
  • [13:15:28] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [13:16:41] <hrw> _koen_: did you get xserver-xorg with xcalibrate working?
  • [13:17:15] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [13:19:04] * naeg (n=naeg@194.208.239.170) has joined #beagle
  • [13:20:23] <_koen_> hrw: no, I use ts_calibrate for that, xcalibrate is kdrive only
  • [13:20:40] <_koen_> hrw: you can build it for xorg, but xorg doesn't call the kdriveinit methods
  • [13:22:54] <hrw> thx
  • [13:26:28] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit ()
  • [13:27:12] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [13:28:09] * CruNcher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) Quit ()
  • [13:28:10] * PuffTheMagic_ (n=quassel@unaffiliated/puffthemagic) Quit (Read error: 110 (Connection timed out))
  • [13:28:14] * CruNcher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) has joined #beagle
  • [13:29:14] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [13:29:39] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [13:32:00] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [13:33:42] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [13:33:49] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [13:36:28] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [13:37:58] <hrw> koen: which recipe contains your calibration script?
  • [13:39:16] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [13:40:08] <hrw> ok, found
  • [13:40:36] * CruNcher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) Quit (Read error: 54 (Connection reset by peer))
  • [13:42:54] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [13:44:05] * rkirti (n=oespirit@203.199.213.3) Quit (Remote closed the connection)
  • [13:45:51] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [13:52:59] * ant_work (n=chatzill@host214-85-static.34-85-b.business.telecomitalia.it) has left #beagle
  • [13:54:06] * rhk (n=rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [13:54:25] * Cru_N_cher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) has joined #beagle
  • [13:56:35] * rkirti (n=oespirit@203.199.213.3) has joined #beagle
  • [13:57:47] * Cru_N_cher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) Quit (Client Quit)
  • [13:59:30] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit ()
  • [14:01:42] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [14:09:43] * PuffTheMagic (n=quassel@unaffiliated/puffthemagic) has joined #beagle
  • [14:14:37] * soman (n=somnath@118.102.130.6) Quit (Read error: 104 (Connection reset by peer))
  • [14:18:01] * jkridner (n=a0321898@nat/ti/x-cqdanhyfwdwhfbwe) Quit (Remote closed the connection)
  • [14:18:01] * jkridner|work (n=a0321898@nat/ti/x-ggaaibxnpnuosnru) Quit (Remote closed the connection)
  • [14:20:10] * docelic (n=docelic@78-2-127-241.adsl.net.t-com.hr) has joined #beagle
  • [14:22:29] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [14:22:35] * naeg (n=naeg@194.208.239.170) Quit ("WeeChat 0.3.0")
  • [14:25:28] * ddompe (n=ddompe@200.122.155.113) has joined #beagle
  • [14:26:44] * raster (n=raster@enlightenment/developer/raster) Quit ("Gettin' stinky!")
  • [14:27:07] * naeg (n=naeg@194.208.239.170) has joined #beagle
  • [14:30:25] * killring (n=killring@adsl-76-226-98-221.dsl.sfldmi.sbcglobal.net) has joined #beagle
  • [14:33:53] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [14:35:38] * jkridner (n=a0321898@nat/ti/x-tiepmucdkyxmlxug) has joined #beagle
  • [14:35:39] * jkridner|work (n=a0321898@nat/ti/x-sscmpagqztgeuwsv) has joined #beagle
  • [14:35:43] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [14:36:29] * docelic (n=docelic@78-2-127-241.adsl.net.t-com.hr) Quit ("http://www.spinlocksolutions.com/")
  • [14:39:59] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [14:41:28] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [14:41:57] * Cru_N_cher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) has joined #beagle
  • [14:46:07] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [14:48:09] * GPSFan (n=kenm@64.92.145.112) has joined #beagle
  • [14:48:48] <_koen_> for all the dvi challenged people, embest now has a vga expansion board for their devkit 8000
  • [14:49:56] * __alanc__ (n=a-campbe@nat/ti/x-nkeixtkhvktyxhdw) has joined #beagle
  • [14:50:09] <av500> http://www.armkits.com/product/vga8000.asp
  • [14:50:29] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [14:50:39] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [14:50:50] * lifeeth is now known as ServerPanda
  • [14:50:58] <qball> luckely I got several dvi capable monitors
  • [14:51:08] * mru has _only_ dvi monitors
  • [14:51:13] <qball> also some monitors with 3 vga and 1 dvi
  • [14:51:21] <qball> rather had it the other way around
  • [14:58:00] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) Quit ("??????")
  • [15:01:53] * djlewis (i=41460bec@gateway/web/freenode/x-bwjlgsnashdzfwsv) has joined #beagle
  • [15:01:55] * robtmr (n=robtmr@S01060026bb736c67.vc.shawcable.net) has joined #beagle
  • [15:02:15] <djlewis> gm
  • [15:02:58] * djlewis believes Sparkfun is causing ripples in the internet time domain :)
  • [15:03:40] <heathkid> no kidding
  • [15:04:43] * av500 still plans to get millions of 1k resistors for free....
  • [15:04:51] <djlewis> hehee
  • [15:05:21] <heathkid> have you seen the irc channel?
  • [15:05:36] <nrossi> @av500 so you can have a new swimming pool?
  • [15:05:46] * davidm1 (n=David@nat/ti/x-laycedlexvbnhpji) has joined #beagle
  • [15:05:46] <djlewis> its more fun to open a box with lots of little things than one thing and wonder if it was the right thing to order.
  • [15:05:47] <av500> nrossi: right!
  • [15:06:18] <heathkid> 1,200 people in #sparkfun now
  • [15:06:26] <av500> 1201
  • [15:06:35] <djlewis> doesnt seem like that may for the occasion.
  • [15:06:37] <Crofton|work> what do they talk about?
  • [15:06:40] <djlewis> many
  • [15:06:48] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) Quit (Read error: 110 (Connection timed out))
  • [15:06:55] <djlewis> how sparkfun is down
  • [15:07:06] <nrossi> i think a freenode server went down?
  • [15:07:29] <heathkid> actually I don't think anyone can type right now excepts ops and those with voice
  • [15:07:29] * djlewis had trouble getting in to #beagle this morn
  • [15:07:37] <Crofton|work> AM I missing something?
  • [15:07:58] <av500> Crofton|work: you can get 100$ for free on sparkfun today
  • [15:08:07] <djlewis> plus shipping.
  • [15:08:11] <heathkid> IF you can get logged in
  • [15:08:25] <heathkid> the site is currently down while they try to fix some things
  • [15:08:25] <Crofton|work> why?
  • [15:08:34] <nrossi> why not?
  • [15:08:48] <Crofton|work> doesn't seem like a good way to stay in business
  • [15:08:52] <heathkid> marketing, getting new customers, DDOS their own site...
  • [15:08:54] * djlewis gets 'SparkFun Electronics is Temporarily Closed!'
  • [15:09:11] <av500> Crofton|work: I think they want to DDOS some ppl at the same hosting provider.... :)
  • [15:09:22] <Crofton|work> heh
  • [15:09:47] <av500> "FREE BEAGLES TODAY AT beagleboard.org"....
  • [15:09:52] * jconnolly|away is now known as jconnolly
  • [15:09:54] <nrossi> lol
  • [15:10:07] <av500> err, *bagles*
  • [15:10:08] <djlewis> av500: watch that false advertising... ;)
  • [15:10:11] * __alanc__ (n=a-campbe@nat/ti/x-nkeixtkhvktyxhdw) Quit (Remote closed the connection)
  • [15:12:01] * _alan (n=a-campbe@nat/ti/x-hrxepejcnsaphjna) has joined #beagle
  • [15:12:54] <av500> ah, sf is back on
  • [15:13:57] <djlewis> can hardly cal it 'on'... more like in a coma
  • [15:13:57] <heathkid> heh... only took me 1:27 minutes to get logged in and my cart pulled up
  • [15:14:37] * djlewis forgot freeday and has no items in cart :(
  • [15:15:26] <Crofton|work> did you have to have items in your cart?
  • [15:15:44] * Entasis (n=Jarred@ppp118-210-72-144.lns20.adl2.internode.on.net) Quit ("Leaving")
  • [15:15:46] <nrossi> you have to push an order through for the freeday
  • [15:17:13] <heathkid> my cart is full
  • [15:18:36] * andrevs is now known as AndrevS
  • [15:20:19] <nrossi> lol, a new channel, and its already at 350 ppl
  • [15:21:33] * djlewis got something in cart and lost connection :(
  • [15:23:39] <djlewis> Crofton|work: i'm thinking that the rush shoppers fill their carts and submit order at end of countdown
  • [15:31:40] * jpsaman (n=jpsaman@videolan/developer/jpsaman) Quit ("Leaving")
  • [15:33:56] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [15:34:24] * virals (n=Viral_Sa@59.97.0.99) Quit (Read error: 60 (Operation timed out))
  • [15:35:05] * virals (n=Viral_Sa@122.166.2.35) has joined #beagle
  • [15:38:44] * alecrim (n=alecrim@189.2.128.130) Quit (Read error: 60 (Operation timed out))
  • [15:41:55] * virals1 (n=viral@122.166.172.254) has joined #beagle
  • [15:42:15] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [15:44:37] * alecrim (n=alecrim@189.2.128.130) Quit (Client Quit)
  • [15:44:50] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [15:45:06] * alecrim (n=alecrim@189.2.128.130) Quit (Read error: 54 (Connection reset by peer))
  • [15:45:38] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [15:46:11] * alecrim (n=alecrim@189.2.128.130) Quit (Client Quit)
  • [15:46:24] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [15:46:51] <_koen_> av500: ping
  • [15:48:16] * brijesh (n=brijesh@nat/ti/x-gauxunmnmxwtwqdb) Quit (Remote closed the connection)
  • [15:48:23] * naeg (n=naeg@194.208.239.170) Quit (Read error: 60 (Operation timed out))
  • [15:50:43] * naeg (n=naeg@194.208.239.170) has joined #beagle
  • [15:51:09] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [15:54:59] * brijesh (n=brijesh@nat/ti/x-zofmaidyidbnfclh) has joined #beagle
  • [15:58:25] <jackman> omfg
  • [15:58:36] <jackman> over 1000 people on #sparkfun
  • [15:58:59] <qball> sparkfun?
  • [16:00:24] <jackman> ya
  • [16:00:25] <jackman> lol
  • [16:00:38] <qball> what thehell is sparkfun
  • [16:00:43] <jackman> sparkfun is giving away $100,000, $100 per person
  • [16:00:49] <jackman> it's a hobbyist electronics dealer
  • [16:01:02] <jackman> they sell beagleboards and arduinos
  • [16:01:03] <av500> today its a waste of time :)
  • [16:01:19] * emeb (n=ericb@ip72-223-81-194.ph.ph.cox.net) has joined #beagle
  • [16:01:53] <qball> aah
  • [16:02:27] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) Quit (Remote closed the connection)
  • [16:04:28] <djlewis> is av500 wasting time too ;P
  • [16:05:24] * jeremychang (n=jeremych@61.57.131.211) has joined #beagle
  • [16:08:21] <djlewis> what is command to mute joins quits?
  • [16:10:58] <av500> man <your irc client>
  • [16:11:35] * djlewis is using stupid IE through freenode link on beagleboard chat
  • [16:11:38] <qball> info <your irc client> works too
  • [16:12:04] <av500> djlewis: rm iexplore.exe
  • [16:12:16] <djlewis> av500: good idea.
  • [16:12:21] <qball> isn't it del
  • [16:12:22] <qball> on win
  • [16:13:00] <djlewis> I just had to pick up this Vista laptop this morning :( as it was handy.
  • [16:13:42] * djlewis keeps windoze around for visual studio dev.
  • [16:13:48] <qball> not win7?
  • [16:14:05] <djlewis> another can of worms though better than vista
  • [16:14:55] <djlewis> I ran the w7 compat check last night and it thinks this Sony qualifies.
  • [16:15:18] <djlewis> then if I install it I lose programs.
  • [16:18:36] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (" ")
  • [16:18:52] * orbarron|OoO is now known as orbarron
  • [16:22:22] * srv (i=7aa75883@gateway/web/freenode/x-ztzrjgvwizhltmef) has joined #beagle
  • [16:23:21] * Openfree|H (n=Openfree@222.65.62.165) Quit (Operation timed out)
  • [16:24:13] * Openfree|H (n=Openfree@222.65.62.165) has joined #beagle
  • [16:26:50] * gregoiregentil (n=gregoire@c-98-210-206-210.hsd1.ca.comcast.net) has left #beagle
  • [16:29:17] * bearsh|work (n=quassel@inst-232.42.zhaw.ch) Quit (Read error: 104 (Connection reset by peer))
  • [16:29:58] * Ceriand|work (n=Ceriand@unaffiliated/ceriand) has joined #beagle
  • [16:30:02] <cody__> does somebody know how to compile a 2.6.31 kernel for the igepv2?
  • [16:30:08] <av500> make?
  • [16:30:31] <cody__> doesnt work
  • [16:30:53] <cody__> there must be some strange patches to make it work
  • [16:31:35] <cody__> and there are just sources for 2.6.28 available for the igep
  • [16:32:13] <av500> if the igepv2 is not mainline, you have to forward port the board specific stuff of course
  • [16:32:37] * pfoetchen (n=pfoetche@188.105.237.223) has joined #beagle
  • [16:33:09] <cody__> hm yes, but im not a kernel hacker=)
  • [16:33:29] <cody__> it sucks that the beagle kernel doesnt work on igep
  • [16:33:57] <av500> cody__: well, and what does 32 gain you?
  • [16:34:01] <av500> err ,31
  • [16:34:17] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [16:34:24] <cody__> somehow my dvb card doesnt work on 2.6.28 kernels
  • [16:34:25] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [16:35:09] <cody__> it shows up in /dev with wrong names and when you try to use it the kernel freezes
  • [16:35:59] <cody__> didnt look whats going wrong yet because it just works on 2.6.31
  • [16:36:50] <cody__> i would use the beagleboard, but its usb is unstable, thats no fun dvb
  • [16:37:00] <cody__> +with
  • [16:37:38] * naeg (n=naeg@194.208.239.170) Quit (Read error: 60 (Operation timed out))
  • [16:41:06] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) has joined #beagle
  • [16:41:54] * srv (i=7aa75883@gateway/web/freenode/x-ztzrjgvwizhltmef) Quit ("Page closed")
  • [16:45:44] * srv (i=7aa75883@gateway/web/freenode/x-kqljpuzqlxffmznz) has joined #beagle
  • [16:46:43] <srv> im computing the pwm off and pwm on time for backlight - is there any standard formule to say for 50% back light values pwm on and pwm off time should be so and so?
  • [16:47:07] <av500> yes, 50% off and 50% on
  • [16:47:41] <srv> i assumed pwm on time to be 3 cycles and varying pwm off time dims the backlight - but im unable to compute the exact values for pwm on and pwm off
  • [16:48:38] <srv> i assumed pwm on to be 3 cycles and pwm off to be 125 cycles and backlight is fully lit, any reference i can find?
  • [16:49:05] <srv> the problem is varying intensities - finding out the appropriate values for these
  • [16:49:48] <av500> id's say the intensity is the on time vs the total time...
  • [16:49:57] <av500> on/(off+on)
  • [16:50:27] <av500> what is the pwm switching speed?
  • [16:50:46] <srv> clock value?
  • [16:50:52] <av500> yes
  • [16:51:44] <srv> 32k
  • [16:52:24] <cody__> how do you program the pwm signal? im interested in that too
  • [16:52:29] <cody__> is the code available?
  • [16:53:00] <srv> i dont know, must be there
  • [16:53:27] <srv> 4 registers thats it
  • [16:54:22] <srv> you can use generic-bl driver and pass a intensity function from the board file
  • [16:55:09] <cody__> hm cool, i would like to drive rc-servos with it
  • [16:55:10] * Mahmoud (i=29c4a608@gateway/web/freenode/x-bcmvbwnjzguggflz) has joined #beagle
  • [16:55:38] * Mahmoud is now known as Guest44123
  • [16:56:54] <srv> av500: clock is 3mhz sorry
  • [16:57:12] <cody__> thats freaking much
  • [16:57:32] <av500> and the cycle length?
  • [16:57:45] <srv> 128
  • [16:57:55] <av500> so, 24khz
  • [16:59:38] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [17:01:28] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) Quit (Remote closed the connection)
  • [17:04:29] * prem__ (n=prem@85.103.214.239) has joined #beagle
  • [17:04:42] <prem__> Hi all
  • [17:05:05] <prem__> did anyone had success with ARM realview ICE to connect to beagle board ?
  • [17:05:33] * jpirko (n=jirka@nat/redhat/x-lucfiphyepdfpday) Quit ("Leaving")
  • [17:09:10] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) has joined #beagle
  • [17:09:12] * BDavid (n=blurgs@nat/ti/x-qpauedutwcemnzuy) Quit (Remote closed the connection)
  • [17:09:30] * j_ack (n=j_ack@p57A428BE.dip0.t-ipconnect.de) has joined #beagle
  • [17:11:42] * prpplague (n=dave123_@ppp-70-249-153-7.dsl.rcsntx.swbell.net) Quit (Nick collision from services.)
  • [17:12:08] * prpplague_afk is now known as prpplague
  • [17:15:28] * wandern (n=joel@westford-nat.juniper.net) has joined #beagle
  • [17:16:32] * j_ack (n=j_ack@p57A428BE.dip0.t-ipconnect.de) Quit ("Verlassend")
  • [17:18:18] * srv (i=7aa75883@gateway/web/freenode/x-kqljpuzqlxffmznz) Quit ("Page closed")
  • [17:19:39] * vindolin (n=vindolin@212.6.136.34) Quit (Read error: 113 (No route to host))
  • [17:20:23] * prpplague^2 (n=dave123_@ppp-70-249-153-7.dsl.rcsntx.swbell.net) has joined #beagle
  • [17:20:31] * prpplague^2 (n=dave123_@ppp-70-249-153-7.dsl.rcsntx.swbell.net) Quit (Client Quit)
  • [17:27:32] * prem__ (n=prem@85.103.214.239) Quit ("Leaving")
  • [17:28:14] * [Bigneko] (n=Storekat@94.145.194.40) has joined #beagle
  • [17:30:41] * ekawahyu1 (n=edls@93-47-27-69.ip110.fastwebnet.it) has joined #beagle
  • [17:31:27] <ekawahyu1> anyone knows how to star with beagle?
  • [17:31:34] <ekawahyu1> *start
  • [17:31:38] <av500> buy one
  • [17:32:08] <jackman> the purchase is definitely important
  • [17:32:25] <jackman> then you got wait for the dealer to get stock
  • [17:32:28] <jackman> then the shipping
  • [17:33:03] <djlewis> ugh...
  • [17:33:44] <av500> then the serial cable fun :)
  • [17:33:56] <prpplague> ekawahyu1: http://www.elinux.org/BeagleBoardBeginners
  • [17:34:00] <av500> the distro wars...
  • [17:34:06] <av500> the toolchain
  • [17:34:18] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:34:20] <prpplague> and usb problems
  • [17:34:26] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [17:34:31] <ekawahyu1> well.... I got my ebvbeagle already
  • [17:34:53] <av500> ekawahyu1: you have an unfair atvantage then! :)
  • [17:35:17] <ekawahyu1> what unfair advantage?
  • [17:35:30] * jeremychang (n=jeremych@61.57.131.211) Quit ("??????")
  • [17:35:52] <ekawahyu1> I looked at it when it arrived and it is exactly the same :)
  • [17:36:11] <av500> ekawahyu1: you already have one :)
  • [17:36:47] <jackman> where'd you get it?
  • [17:36:49] <ekawahyu1> ha..ha...ha... you got me... I thought it was difference
  • [17:37:09] <ekawahyu1> from Germany
  • [17:37:46] <av500> yes, it runs faster due to no speed limit :)
  • [17:38:13] <ekawahyu1> are you serious?
  • [17:38:15] <prpplague> av500: good one
  • [17:39:06] * djlewis (i=41460bec@gateway/web/freenode/x-bwjlgsnashdzfwsv) Quit (Ping timeout: 180 seconds)
  • [17:41:49] <ekawahyu1> I have been playing around with validation tools and ubuntu
  • [17:42:18] <ekawahyu1> but I think I would like to try something else
  • [17:43:01] <ekawahyu1> I am used to programming microcontroller, is there a way to find an open source tools for that purpose?
  • [17:43:32] <prpplague> ekawahyu1: http://www.elinux.org/BeagleBoardBeginners
  • [17:43:36] <prpplague> ekawahyu1: http://www.elinux.org/BeagleBoard
  • [17:43:40] <av500> ekawahyu1: not really
  • [17:43:49] <crashovrd> gcc is what everyone uses
  • [17:44:31] <mru> everyone who can't afford a better compiler at least
  • [17:44:41] <ekawahyu1> so I could use Eclipse IDE then
  • [17:44:45] <crashovrd> well, he said "open source"
  • [17:45:00] <ekawahyu1> prpplague: I am looking at it, thanks
  • [17:45:02] <mru> all compilers can build open source code
  • [17:45:29] * crashovrd looks at VC6
  • [17:45:48] * mru was thinking of rvct
  • [17:46:23] <ekawahyu1> well I would prefer GCC over VC6, since I have been using it for Cortex-M3
  • [17:47:07] <crashovrd> take a look at that lab link that shows a step by step cross compiler set up
  • [17:47:26] <crashovrd> i can never find the link otherwise i would post it
  • [17:48:40] * hrw is now known as hrw|gone
  • [17:49:11] <crashovrd> found it
  • [17:49:30] <crashovrd> free-electrons.com/blog/beagle-labs/
  • [17:49:50] <crashovrd> thats a good place to start for cross compiling intro
  • [17:50:38] <crashovrd> you can replace the crosstools-NG part with the CodeSourcery G++ Lite
  • [17:52:24] <ekawahyu1> hey, I use CodeSourcery for my M3, do you think I use the same compiler you are talking about?
  • [17:52:31] <crashovrd> yup
  • [17:52:59] <crashovrd> all ARM is in the same package, just different compile parameters
  • [17:53:06] <ekawahyu1> ah, ok, then I already have one here installed with Eclipse :)
  • [17:53:20] <crashovrd> yup, its the same thing, just different flags
  • [17:53:36] * robtmr (n=robtmr@S01060026bb736c67.vc.shawcable.net) Quit ()
  • [17:54:31] <ekawahyu1> so, inside this Free Electron, I can find the flag setup?
  • [17:55:25] <crashovrd> no, the flags are set by the source code make / config
  • [17:55:34] <crashovrd> each one is different
  • [17:55:58] <crashovrd> consult the docs for the project you are interested in compiling for specifics on choosing architecture
  • [17:57:02] <ekawahyu1> ok, I will look at this site
  • [17:57:04] <ekawahyu1> thanks
  • [17:57:05] <crashovrd> but since ARM is pretty much backwards compatible, you can probably just compile and run somethings
  • [17:57:15] <crashovrd> just wont have features of the newer proc
  • [17:57:30] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit ()
  • [17:57:38] <crashovrd> make sure your code sourcery packing is arm-linux-gnueabi
  • [18:03:46] * guaqua (i=gua@lakka.kapsi.fi) has left #beagle
  • [18:10:07] * emeb (n=ericb@ip72-223-81-194.ph.ph.cox.net) has left #beagle
  • [18:11:24] <ekawahyu1> oops... mine is arm-none-gnueabi
  • [18:11:55] <ekawahyu1> because my Cortex-M3 uses no linux there
  • [18:12:44] <av500> ekawahyu1: most ppl here use BB and linux, not many use it as a pure microcontroleer
  • [18:12:57] <av500> due to the complexity
  • [18:13:13] <ekawahyu1> how can I install both linux-gnueabi and none-eabi to the same PC?
  • [18:13:22] * j_ack (n=j_ack@87.164.40.190) has joined #beagle
  • [18:13:31] <ekawahyu1> :-/
  • [18:13:56] <av500> different folders?
  • [18:14:02] * courville (n=courvill@archos.rain.fr) Quit (Read error: 110 (Connection timed out))
  • [18:14:48] * jserv-- (n=jserv@61.57.131.211) has joined #beagle
  • [18:15:00] <ekawahyu1> let me try
  • [18:15:42] <av500> I'm sure you have a "mkdir" command :)
  • [18:31:55] * djlewis_ (i=41401e0c@gateway/web/freenode/x-ivrkgsxbqehzsuoe) has joined #beagle
  • [18:33:16] * djlewis_ had two treasures in his checkout bin 1 hour into Sparkfun sale
  • [18:33:24] <djlewis_> But then could never get to checkout.
  • [18:33:28] <djlewis_> :(
  • [18:34:18] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [18:34:26] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [18:35:14] <prpplague> djlewis_: what were you trying to get?
  • [18:37:15] <djlewis_> prpplague: Had a couple motors and a arduino in the basket.
  • [18:37:26] <prpplague> djlewis_: ahh
  • [18:38:05] <djlewis_> ardunio just for the experience. motors for another bot I am building.
  • [18:38:26] <prpplague> djlewis_: ahh dandy
  • [18:38:48] <djlewis_> ahh, dadny? i couldnt check out ;P
  • [18:38:54] <djlewis_> dandy ..
  • [18:39:59] <prpplague> djlewis_: " motors for another bot I am building."
  • [18:40:47] * prpplague hates waiting to hear back on contracts
  • [18:40:58] * ServerPanda (n=praneeth@unaffiliated/lifeeth) Quit ("food tiem")
  • [18:41:46] * jkridner|work (n=a0321898@nat/ti/x-sscmpagqztgeuwsv) has left #beagle
  • [18:41:46] * jkridner (n=a0321898@nat/ti/x-tiepmucdkyxmlxug) has left #beagle
  • [18:42:20] <av500> prpplague: "we'll call you back..."
  • [18:43:03] * Guest44123 (i=29c4a608@gateway/web/freenode/x-bcmvbwnjzguggflz) Quit ("Page closed")
  • [18:43:10] <prpplague> av500: more like "quote looks great, we want to do this, now we have to get management to approved it"
  • [18:44:23] <av500> good luck
  • [18:45:41] * xpg (n=pf@port234.ds1-gjp.adsl.cybercity.dk) has joined #beagle
  • [18:46:19] <crashovrd> nvidia just announced their new tegra 2
  • [18:46:24] <crashovrd> dual cortex A9
  • [18:47:50] <prpplague> crashovrd: interesting
  • [18:48:08] <crashovrd> the board they are showing is the same size as beagle
  • [18:48:09] <prpplague> av500: thing is i have about 5 of those outstanding right now
  • [18:53:37] * shadenzo_ (i=4f1e852a@gateway/web/freenode/x-xoobfcbkxmdphqeh) has joined #beagle
  • [18:54:43] * shadenzo_ (i=4f1e852a@gateway/web/freenode/x-xoobfcbkxmdphqeh) Quit (Client Quit)
  • [18:56:27] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 110 (Connection timed out))
  • [18:57:34] * robtow (n=robtow@dsl092-218-034.sfo2.dsl.speakeasy.net) has joined #beagle
  • [18:59:39] * Xerion (n=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
  • [19:01:41] * philo (i=4618df12@gateway/web/freenode/x-tpimmncnvkakgxvo) has joined #beagle
  • [19:04:34] <wandern> is 1.8.18 still the recommended version of OE?
  • [19:08:20] * jserv-- (n=jserv@61.57.131.211) Quit (Remote closed the connection)
  • [19:15:34] * nrossi (n=na@61.37.96.58.static.exetel.com.au) Quit ()
  • [19:33:12] <Crofton> robtow, what did you do to get gphoto working?
  • [19:34:19] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [19:34:27] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [19:42:27] <robtow> Crofton.... it turned out to be not software per se.
  • [19:43:03] <av500> connecting the camera helped? :)
  • [19:43:22] <robtow> The problem was USB power related, which caused flaky software; it was wonderously confusing because the USB problem was statistical; and usually happened during the (larger) file transfers.
  • [19:43:48] <robtow> The 1st order solution was applying 20uf of capacitance across C97.
  • [19:44:08] * djlewis_ (i=41401e0c@gateway/web/freenode/x-ivrkgsxbqehzsuoe) Quit (Ping timeout: 180 seconds)
  • [19:44:29] <robtow> The second was to NOT attach a keyboard and mouse and ethernet dongle to the USB port sans extra power on a hub.
  • [19:46:10] <robtow> I was mislead by the observation that gphoto2 could command picture taking and list files and obtain thumbnails and metadata, but not do picture transfers - the former worked because small amounts of data were involved; the latter failed beacuse a usb glitch would occur during the xfer.
  • [19:46:33] <crashovrd> i feel your pain on that one
  • [19:46:44] <crashovrd> just went throught that myself on something different
  • [19:46:51] <av500> the usual usb problems...
  • [19:46:56] <robtow> However, it was very useful to figure out al the needed resources to natively compile libgphoto2 and gphoto2 Under Angstrom.
  • [19:46:58] <av500> otg or ehci?
  • [19:47:10] <crashovrd> ehci
  • [19:48:36] <robtow> I am now able to command a Canon G10 camera from the Beagle Board, and acquire 14M images, and process them through Imagemagick on the Beagle board - very nice indeed. Now I'll proceed to wire it up to the main command processor on our robotic platform.
  • [19:49:03] <Crofton> so both native build and recipe gphoto work?
  • [19:49:22] * _koen_ (n=x0115699@nat/ti/x-dsjocriboqgfhase) Quit (Remote closed the connection)
  • [19:49:23] <av500> robtow: process them on the DSP :)
  • [19:49:31] * ryd_ is now known as ryd
  • [19:49:40] <Crofton> av500, +1
  • [19:49:54] <robtow> Crofton - I haven't gone back and tried the original Angstrom included gphoto2; I'll do that and compare, and let you know.
  • [19:49:55] <Crofton> this year we must expose dsp to open source people
  • [19:49:58] <Crofton> thanks
  • [19:50:02] <Crofton> when you get to it
  • [19:50:09] <robtow> av500 - have not yet gotten into the DSP.
  • [19:50:19] <Crofton> what dependencies did you need to build gphoto native?
  • [19:50:28] <robtow> I would like to use the dsp; but for now imagemagick on the ARM side will do.
  • [19:50:41] <av500> what kind of processing?
  • [19:52:21] <robtow> crofton - I needed to opkg install pkgconfig, libtool, libltdl, libtool-dev, libusb-0.1-dev
  • [19:52:34] <Crofton> ok
  • [19:52:53] <Crofton> I will give it a shot with my updated task-native-sdk b4 I commit that
  • [19:53:27] <robtow> av500 - subsampling, variable compression, edge maps, and related image processing.
  • [19:54:25] <robtow> <---will be communicating to Beagle Board via Iridium satellite; need to conserve bandwidth, take big pix and send as little data as possible.
  • [19:54:54] <av500> ok
  • [19:55:00] <Crofton> robtow, let me know if you need help field testing!
  • [19:55:10] <robtow> Crofton - that sounds great. I'm sure adding that will make the beagle Board much more useful to the community.
  • [19:55:27] <Crofton> yeah, more people are tyring native work
  • [19:55:37] <robtow> Crofton - our test site is on the north Kona coast!
  • [19:55:46] <av500> north korea?
  • [19:55:47] <Crofton> I wonder if TI has dsp compilers that run on the beagle
  • [19:55:52] <Crofton> :)
  • [19:55:56] <av500> Crofton: sure
  • [19:55:58] <Crofton> yeah you told me that :)
  • [19:55:58] <av500> in wine
  • [19:56:01] <av500> or qemu
  • [19:56:13] <av500> bb -> qemu -> wine -> dspcc
  • [19:56:18] <robtow> Crofton - native editing and compiling works nicely via multiple ssh sessions into the beagle from Ubuntu :-)
  • [19:57:04] <robtow> The xterm under Ubuntu is much nicer than the xterm under Angstrom, IMHO.
  • [19:57:19] <Cru_N_cher> ahhh
  • [19:57:23] <robtow> Crofton - thanks very much for your excellent advice with the native building.
  • [19:57:26] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [19:57:30] <av500> Cru_N_cher: ???
  • [19:57:44] <Cru_N_cher> the boxxe box is tegra 2 based
  • [19:58:43] <robtow> I'm going to need to order about thirty Beagles soon - is the rev 4 oput, with a fix to the usb power problem?
  • [19:59:00] <av500> yes
  • [19:59:04] <av500> fix
  • [19:59:10] <av500> out, yet not
  • [19:59:29] * calculu5 (n=calculus@gentoo/user/calculus) has joined #beagle
  • [19:59:38] * calculus (n=calculus@gentoo/user/calculus) Quit (Read error: 104 (Connection reset by peer))
  • [19:59:57] <Cru_N_cher> hehe D-Links first partner was DivX :) providing them the GejBox :)
  • [20:00:11] <Cru_N_cher> and now it's Boxxee and Nvidia :P
  • [20:00:57] <Cru_N_cher> worlds in between the platforms though :)
  • [20:03:00] <sakoman_> robtow: glad to see you solved the camera mystery!
  • [20:03:30] <sakoman_> I always use a powered hub, so that explains why I didn't see the problem
  • [20:03:30] <prpplague> robtow: 30 beagles? what for?
  • [20:04:25] <robtow> sakoman - it was driving me NUTS for two weeks.
  • [20:05:08] <sakoman_> robtow: sorry I didn't think to ask about your hub situation
  • [20:05:14] * naeg (n=naeg@194.208.239.170) has joined #beagle
  • [20:05:21] <robtow> prpplague - as a satellite image processing computer with a camera on a platform I'm working on.
  • [20:05:29] <sakoman_> robtow: so does that mean your camera works with my stock gnome image now?
  • [20:05:54] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [20:06:01] <robtow> sakoman - it also required the 20uf cap across C97; there were two hardware issues that made the software appear to be flakey.
  • [20:06:20] * _koen_ (n=x0115699@nat/ti/x-cnpgnjegxrbdjyci) has joined #beagle
  • [20:06:23] <robtow> sakoman - I haven't tried that; I'll put that SD card in and try it right now.
  • [20:07:01] * calculu5 is now known as calculus
  • [20:07:44] <robtow> I did find one new amusing problem - the 14M images from the Canon G10 are too large for the Gimp to open under Angstrom - crashes everytime.
  • [20:07:46] <prpplague> robtow: ahh interesting
  • [20:07:49] <sakoman_> robtow: suggestions for things that might be useful to add to the image are also welcome
  • [20:08:00] <robtow> sakoman - sure :-)
  • [20:08:24] <robtow> sakoman - did you see the stuff above about additional needed resources for native compiling?
  • [20:09:04] <robtow> I had to do opkg install pkgconfig, libtool, libltdl, libtool-dev, libusb-0.1-dev to get libgphoto2 and gphoto2 to compile under the Angstrom image
  • [20:09:34] <sakoman_> robtow: yes, I did
  • [20:09:40] <robtow> cool.
  • [20:09:45] * mstrkrft (i=c8c71769@gateway/web/freenode/x-ctelqulrhbvelsxn) has joined #beagle
  • [20:11:56] <robtow> <---will want to disable X and run with only serial comm on my platform, with a specialized boot script to run a command & control program.
  • [20:12:30] <sakoman_> robtow: just do a custom image and leave out X
  • [20:12:50] <robtow> sakoman - that would be the right idea, yes.
  • [20:15:18] * ekawahyu1 (n=edls@93-47-27-69.ip110.fastwebnet.it) Quit (Read error: 54 (Connection reset by peer))
  • [20:15:53] * ekawahyu (n=edls@93-47-27-69.ip110.fastwebnet.it) has joined #beagle
  • [20:15:59] <robtow> I need fast boot, and no need for anything but serial comm.
  • [20:16:53] <Crofton> console-image and fiddle with the init stuff?
  • [20:17:03] * Gareth (n=nnnnnnnn@www.wiked.org) has joined #beagle
  • [20:17:06] * Crofton is annoyed waiting for bluetooth to time out :)
  • [20:17:11] <Gareth> Greetings.
  • [20:17:35] <sakoman_> Crofton: that's what I would do -- plus a pass through defconfig with a sharp knife :-)
  • [20:18:23] <sakoman_> Crofton: I've done fast boot images for some clients and you can really cut a lot of time out of the boot
  • [20:18:28] <Crofton> yeah
  • [20:18:48] * parapete (n=pete@host86-130-20-95.range86-130.btcentralplus.com) has joined #beagle
  • [20:18:48] <Crofton> not a real problem atm
  • [20:19:41] * _alan (n=a-campbe@nat/ti/x-hrxepejcnsaphjna) Quit ()
  • [20:19:56] * eFfeM1 (n=frans@j200125.upc-j.chello.nl) has joined #beagle
  • [20:20:14] <robtow> sakoman - booted your image - gphoto2 is seeing the camera with --abilities, but not able to command picture taking
  • [20:20:31] <robtow> wait...
  • [20:20:35] <robtow> cable problem?
  • [20:20:37] <robtow> hold on
  • [20:21:35] <robtow> --capture-image-and-download failed with "unspecified error".
  • [20:21:46] <robtow> The camera did extend its lens and take a pic
  • [20:22:15] <wandern> git gurus:
  • [20:22:24] <robtow> hmmm
  • [20:22:35] <wandern> how do I set my clone to that of a specific version:
  • [20:22:57] <wandern> omap-2.6.32
  • [20:23:00] <robtow> sakoman - it fails on the xfer every time.
  • [20:23:17] <wandern> i pulled the commit id from git.kernel.org as 2a20..... etc
  • [20:23:33] <wandern> git checkout [commit id above?]
  • [20:23:34] <sakoman_> robtow: do you recall which version of the gnome image you are using?
  • [20:23:43] <robtow> sakoman - after the last trial it froze the beagle.
  • [20:23:49] <cwillu_at_work> wandern, you don't; you just clone it, and then git checkout omap-2-6-32
  • [20:24:28] <robtow> gnome-r10.tar.bz2
  • [20:24:29] <Crofton> I have an older Nikon with a cracked lcd
  • [20:24:33] <sakoman_> robtow: OK, I'll do a bit more testing before my next release
  • [20:24:41] <Crofton> I should see if I can get it working with my beagle
  • [20:24:58] <Crofton> can you power the camera via usb?
  • [20:25:19] <robtow> sakoman - i'll also try the stock gphoto2 from Angstrom, versus my natively compiled gphoto2 (the latter works fine).
  • [20:25:49] <robtow> crofton - no. I am using an external power supply that fits in the battery well of the canon G10.
  • [20:25:56] <Crofton> ah
  • [20:26:15] <Crofton> this is a coolpix L$
  • [20:26:20] <Crofton> L4
  • [20:26:21] <robtow> And I will power the camera up and down using that power supply, with the "power on" button fitted so as to always be depressed.
  • [20:26:25] <Crofton> uses 2 AA batteries
  • [20:27:08] <wandern> I get an error: pathspec 'omap-2-6-32'...
  • [20:27:20] <wandern> how can I pull a list of checkpoints?
  • [20:27:27] <wandern> tried guessing with git branch to find something
  • [20:27:38] <robtow> Crofton - does the Coolpix support tethered operation, or just downloaded?
  • [20:27:43] <wandern> cd .
  • [20:27:44] <wandern> oops
  • [20:27:49] <robtow> err, "just downloading".
  • [20:30:40] * ekawahyu (n=edls@93-47-27-69.ip110.fastwebnet.it) has left #beagle
  • [20:30:41] <wandern> cwillu_at_work: git-branch omap-2.6.32, then git checkout?
  • [20:30:46] * __alanc__ (n=a-campbe@nat/ti/x-answdvqmpblknwyx) has joined #beagle
  • [20:30:59] <wandern> It says "switched to branch', but that seems too simple
  • [20:31:17] <cwillu_at_work> wandern, "git clone git://whatever" and then "git checkout omap-2.6.32"
  • [20:31:36] <wandern> Hmm, do I need to clone the branch seperately?
  • [20:32:04] <cwillu_at_work> wandern, you clone an entire repository
  • [20:32:20] <wandern> cloned tmlind/linux-omap-2.6
  • [20:32:45] <eFfeM1> _koen_: what is the procedure to follow to get a new machine (openrd client) on amethyst
  • [20:32:55] <cwillu_at_work> wandern, git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git?
  • [20:33:00] <wandern> git clone git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git linux-omap-2.6
  • [20:33:07] <wandern> yup, that was what I pulled
  • [20:33:22] <wandern> but git branch only showed the master
  • [20:33:30] <wandern> <--- obvious newb at git
  • [20:33:37] <cwillu_at_work> wandern, "git tag"
  • [20:33:55] <cwillu_at_work> wandern, will list the tags you care about I suspect, and then git checkout <tag>
  • [20:34:26] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [20:34:35] <wandern> bingo
  • [20:34:46] <wandern> cwillu: you are awesome, thank you
  • [20:34:58] <cwillu_at_work> You know what? I _am_ awesome :D
  • [20:35:02] <wandern> Do I need to worry about creating a new branch, as I'm not contributing anything back right now?
  • [20:35:07] <cwillu_at_work> wandern, nope
  • [20:35:19] <cwillu_at_work> wandern, I mean, you can, and if you're working on stuff you should
  • [20:35:26] <cwillu_at_work> allows you to commit your changes and such
  • [20:35:37] <cwillu_at_work> (don't get confused between commiting and pushing your changes back)
  • [20:35:46] <wandern> that might be dangerous at the moment... but I'll... ahh, good point
  • [20:36:05] <cwillu_at_work> there's nothing dangerous about branching and committing, it only affects you anyway
  • [20:36:24] <wandern> Just wanted to test from a clean reference point, isntead of the daily build
  • [20:36:26] <wandern> Thanks!
  • [20:37:09] <cwillu_at_work> wandern, the right way to start a branch is: git checkout -b <your branch name>
  • [20:37:23] <cwillu_at_work> which will branch from the current point (you can add a different start point if you wish)
  • [20:38:55] * parapete (n=pete@host86-130-20-95.range86-130.btcentralplus.com) Quit ("/kick evilpaul")
  • [20:40:19] <wandern> ok.
  • [20:40:30] * Yuvi (n=yuvi@d-69-161-90-167.cpe.metrocast.net) Quit (Read error: 110 (Connection timed out))
  • [20:42:13] * pfoetchen (n=pfoetche@188.105.237.223) Quit (Read error: 60 (Operation timed out))
  • [20:42:15] <robtow> Crofton - I tried the gphoto2 from the stock Angstrom demo image - it glitched once on the file xfer, then ran the next five ok.
  • [20:43:56] <robtow> <--notices that the gphoto2 that I compiled locally is MUCH larger than the stock gphoto2.
  • [20:44:08] <mru> probably debugging symbols
  • [20:44:12] * Meizirkki (n=Meizirkk@bbwirelessgw2-fee1dc00-2.dhcp.inet.fi) Quit (Remote closed the connection)
  • [20:44:17] <robtow> <nods>
  • [20:44:27] <mru> or you just got more code, which has to be a good thing, right?
  • [20:44:37] <mru> 2MB for the price of 1
  • [20:44:41] <robtow> 221469 bytes versus 77172
  • [20:45:37] <mru> bargain!
  • [20:46:36] <_koen_> eFfeM1: send a patch to add it
  • [20:47:22] <_koen_> sakoman_: could you try to extract some info from the ts with the 'xinput' tool?
  • [20:47:34] <_koen_> sakoman_: that should tell you if the mode is abolute or relative
  • [20:49:09] <eFfeM1> _koen_: patch on what? the generator? Is openrd-client already on the feed (no idea on how to check that either)
  • [20:50:29] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [20:51:21] * cwillu_at_work is now known as IcantBelieveItsN
  • [20:51:25] <_koen_> eFfeM1: if you go to the narcissus page, read what it says about patches at the bottom and follow that link
  • [20:53:38] * IcantBelieveItsN is now known as cwillu_at_work
  • [21:00:37] * djlewis_ (i=41401e0d@gateway/web/freenode/x-ikbhomeleiguwlwh) has joined #beagle
  • [21:01:49] <eFfeM1> _koen_: thanks for the info, will have a look at it (actually thought the patches link on the narcissus page was only for the generator ui and not for the feeds), will try to make it work this weekend
  • [21:04:22] <Gareth> Just sent an email to some folks who represented Beagle Board at SCALE (So Cal Linux Expo) last year, but wanted to mention it in here as well...SCALE 8x is coming up fast. February 19th-21st in Los Angeles, and we'd love to have a Beagle Board presence there again.
  • [21:09:22] * florian (n=fuchs@Maemo/community/contributor/florian) has joined #beagle
  • [21:17:05] * ant__ (n=andrea@host110-252-dynamic.1-79-r.retail.telecomitalia.it) has joined #beagle
  • [21:17:07] <sakoman_> koen: I got past the relative/absolute issue by adding tslib explicitly to xorg.conf
  • [21:17:45] <sakoman_> my issue now is that xf86-input-tslib seems to be randomly choking on the data
  • [21:18:24] <sakoman_> the visible result is whacky coordinates and bouncy pen down/up events
  • [21:18:56] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) Quit (Read error: 110 (Connection timed out))
  • [21:20:18] <sakoman_> _koen_: sorry, used the wrong nick above
  • [21:20:34] <sakoman_> forgot your ears :-)
  • [21:20:53] <_koen_> sakoman_: how did you add it explicitly?
  • [21:21:00] <sakoman_> I'm trying some older images (1 month ago) and they are rock steady
  • [21:21:49] <sakoman_> _koen_: http://www.sakoman.net/cgi-bin/gitweb.cgi?p=openembedded.git;a=commitdiff;h=5912f285835583a50a135be22a76abc96948e97a
  • [21:22:41] * mikhas (n=mikhas@85.183.48.167) Quit (Read error: 113 (No route to host))
  • [21:28:34] <sakoman_> _koen_: recent gpe images hang during first boot after touchscreen calibration
  • [21:28:51] <sakoman_> one of the Xinit.d scripts has an infinite loop in it
  • [21:30:25] <Crofton> can I add something like ${pinmux} to the bootargs lines in u-boot
  • [21:30:36] <Crofton> and have it not barf if the variable is not set?
  • [21:32:18] <Crofton> so I can add stuff like this: omap_mux=i2c2_scl.i2c2_scl=0x100,i2c2_sda.i2c2_sda=0x100
  • [21:32:24] * naeg (n=naeg@194.208.239.170) Quit (Read error: 54 (Connection reset by peer))
  • [21:33:28] <prpplague> Crofton: should be able to, but the command would get long quickly if you were going to specify alot of configs
  • [21:33:28] <sakoman_> Crofton: good question :-)
  • [21:33:48] <Crofton> that's why I want to put the custom mux in its own var
  • [21:34:08] <sakoman_> Crofton: you will soon be the expert who can teach all of us!
  • [21:34:16] <Crofton> any thoughts on what i2c2_scl.i2c2_scl menas?
  • [21:34:29] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [21:34:31] <_koen_> sakoman_: so the relative thing was due to evdev being used?
  • [21:34:45] <sakoman_> _koen_: yeah, I believe so
  • [21:35:10] <sakoman_> I'm not really sure why tslib didn't start automatically like it used to
  • [21:35:24] <sakoman_> from my reading of the scripts it should have
  • [21:36:52] * hrw|gone is now known as hrw
  • [21:37:11] <Crofton> Format: <mux_mode0.mode_name=value>
  • [21:38:23] <_koen_> sakoman_: the xserver might not be querying hal like it used to
  • [21:38:28] <_koen_> sakoman_: that's my guess
  • [21:40:26] <_koen_> sakoman_: yep, xorg doesn't have a shlib for hal anymore, time to debug the build...
  • [21:44:16] * ddompe (n=ddompe@200.122.155.113) Quit (Read error: 60 (Operation timed out))
  • [21:45:23] * hrw is now known as hrw|gone
  • [21:47:26] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit ()
  • [21:48:44] * prpplague is now known as prpplague_afk
  • [21:50:25] * pH5 (n=ph5@e178202013.adsl.alicedsl.de) has joined #beagle
  • [21:50:36] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [21:54:26] * mstrkrft (i=c8c71769@gateway/web/freenode/x-ctelqulrhbvelsxn) Quit (Ping timeout: 180 seconds)
  • [22:02:34] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [22:05:19] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [22:06:59] <Cru_N_cher> http://www.nvidia.com/object/tegra_250.html <- i wonder with what battery they meassured 16 H 1080p playback :D
  • [22:08:16] * [Bigneko] (n=Storekat@94.145.194.40) Quit ("Leaving")
  • [22:08:41] * eFfeM1 (n=frans@j200125.upc-j.chello.nl) Quit ("Leaving.")
  • [22:11:14] <crashovrd> i am hyped about that Tegra 2
  • [22:11:16] * calculu5 (n=calculus@gentoo/user/calculus) has joined #beagle
  • [22:11:23] <crashovrd> cant wait to see what Omap4 does to compete
  • [22:12:13] <Cru_N_cher> sorry but if i remember how they hyped the Tegra 1
  • [22:12:24] <crashovrd> they got real media hardware, where omap does DSP
  • [22:12:26] <Cru_N_cher> and how long it then took before it reached the market
  • [22:12:32] <Cru_N_cher> and what the end performance was
  • [22:12:42] <Cru_N_cher> im sceptical this time
  • [22:12:44] <Cru_N_cher> :P
  • [22:13:07] <crashovrd> i am not. the CES presentation was awesome. should have product this summer
  • [22:13:21] <Cru_N_cher> yeah they speeded up now
  • [22:13:50] <Cru_N_cher> boxxe box i guess will be the first real product using it
  • [22:14:01] * j_ack (n=j_ack@87.164.40.190) Quit ("Verlassend")
  • [22:16:15] <Cru_N_cher> crashovrd yes they have long time research in their HW decoder core but on Tegra 1 it practicaly failed no High Profile officialy and no Cabac but b-frames
  • [22:16:23] <Cru_N_cher> that was so damn weak
  • [22:16:41] <Cru_N_cher> @ least compared to what they showed
  • [22:17:10] <Cru_N_cher> but ok they never said how complex the videos where that they played back ;)
  • [22:17:15] <Cru_N_cher> only resolution
  • [22:17:37] <kblin> black, at 1080p :)
  • [22:17:38] * j_ack (n=j_ack@p57A428BE.dip0.t-ipconnect.de) has joined #beagle
  • [22:17:53] * rhk (n=rhk@adsl-75-44-25-53.dsl.sfldmi.sbcglobal.net) Quit ("ChatZilla 0.9.86 [Firefox 3.0.17/2009122116]")
  • [22:17:53] <kblin> wait, 720p is HD as well :)
  • [22:18:14] <Cru_N_cher> yeah could be 16 H 720p also
  • [22:18:34] <Cru_N_cher> but guess that difference will be like 2 h more or less
  • [22:19:06] <crashovrd> tegra 1 is powering zune and they are boasting 1080i
  • [22:19:34] <Cru_N_cher> proof ?
  • [22:19:57] <Cru_N_cher> i only so far saw their 720p low complexity WMV stuff runinf
  • [22:20:42] <Cru_N_cher> and the restriction overall in Firmware and Microsofts Software seem to be very high anyways
  • [22:21:00] <Cru_N_cher> i doubt 1080p content would ever reach the device :P
  • [22:22:08] * prpplague (n=dave123_@ppp-70-249-153-7.dsl.rcsntx.swbell.net) has joined #beagle
  • [22:22:20] * rbelem (n=rodrigo@pdpc/supporter/professional/rbelem) Quit ("Leaving")
  • [22:22:41] * calculus (n=calculus@gentoo/user/calculus) Quit (Read error: 110 (Connection timed out))
  • [22:23:09] * calculu5 is now known as calculus
  • [22:23:41] <Cru_N_cher> also Samsungs YP-M1 is weak in performance
  • [22:23:52] <Cru_N_cher> the only thing they good @ High Price :P
  • [22:24:16] * mikhas (n=mikhas@p4FC2176F.dip.t-dialin.net) has joined #beagle
  • [22:24:42] <Cru_N_cher> also Nvidia is to slow
  • [22:24:55] * _chase_ (n=chase@nat/ti/x-sdvnzktzcjpxjzzk) Quit ()
  • [22:25:20] <Cru_N_cher> Telechips already is throwing their 1080p solution into China
  • [22:27:17] * i-sat (n=mobidev@94.127.205.30) has joined #beagle
  • [22:29:04] <crashovrd> relax, i didnt say u had to buy one
  • [22:29:06] <crashovrd> ;)
  • [22:33:17] * mrc3_ (n=mrc3@nat/ti/x-vqehrxjqbfwnpjiq) Quit (Remote closed the connection)
  • [22:34:05] * mrc3_ (n=mrc3@nat/ti/x-olkpguigojrgmctr) has joined #beagle
  • [22:34:27] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [22:35:23] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [22:36:38] * Cru_N_cher (n=luls_lol@dslb-084-058-160-161.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [22:38:18] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [22:39:06] * philo (i=4618df12@gateway/web/freenode/x-tpimmncnvkakgxvo) Quit ("Page closed")
  • [22:40:17] <djlewis_> oh...argfart!
  • [22:40:36] * i-sat (n=mobidev@94.127.205.30) Quit ("?????????? ?? ???? ?????? (xchat 2.4.5 ?????? ????????????)")
  • [22:41:41] <prpplague> djlewis_ hehe
  • [22:42:11] <djlewis_> these broken OS windoze computers are eating my lunch today ;p
  • [22:43:22] * ant__ (n=andrea@host110-252-dynamic.1-79-r.retail.telecomitalia.it) has left #beagle
  • [22:44:03] * Cru_N_cher (n=luls_lol@dslb-084-058-130-038.pools.arcor-ip.net) has joined #beagle
  • [22:44:50] <mru> djlewis_: don't put your burger in the dvd drive
  • [22:45:33] <mru> no, that's not a cup holder either... stop that, it will drink your coke if you put it there
  • [22:47:07] <Cru_N_cher> damn stumbled over the power cord :P
  • [22:47:41] <Cru_N_cher> on the way to the Hawai pizza
  • [22:47:47] <Cru_N_cher> ;)
  • [22:49:12] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [22:50:59] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [22:51:14] * docelic (n=docelic@78-2-71-58.adsl.net.t-com.hr) has joined #beagle
  • [22:56:48] * davidm1 (n=David@nat/ti/x-laycedlexvbnhpji) Quit (Remote closed the connection)
  • [22:57:05] * davidm1 (n=David@nat/ti/x-zmohwljnpwsajrnb) has joined #beagle
  • [23:01:14] <djlewis_> from all the spills i find in cd players you'd think they were made for cup holders
  • [23:05:22] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [23:07:15] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) Quit (Client Quit)
  • [23:08:30] * wandern (n=joel@westford-nat.juniper.net) Quit ("Ex-Chat")
  • [23:16:04] * xpg (n=pf@port234.ds1-gjp.adsl.cybercity.dk) Quit ("Leaving")
  • [23:17:48] * j_ack (n=j_ack@p57A428BE.dip0.t-ipconnect.de) Quit (No route to host)
  • [23:18:16] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) has joined #beagle
  • [23:21:03] * __alanc__ (n=a-campbe@nat/ti/x-answdvqmpblknwyx) Quit ()
  • [23:23:12] * AndrevS is now known as andrevs
  • [23:24:10] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [23:25:40] * philo (i=4618dd8c@gateway/web/freenode/x-djfgwnowsjshpiqj) has joined #beagle
  • [23:25:49] <philo> hi
  • [23:25:57] * like2wise (n=like2wis@82-171-51-231.ip.telfort.nl) Quit (Client Quit)
  • [23:25:59] <philo> can someone advice me on a good lcd screen for the beagle ?
  • [23:27:16] * cwillu_at_work looks at prpplague
  • [23:28:25] * ppotera (n=ppotera@c-69-243-129-126.hsd1.il.comcast.net) has joined #beagle
  • [23:31:02] * raster (n=raster@enlightenment/developer/raster) has joined #beagle
  • [23:31:13] <Gareth> raster: ahoy :)
  • [23:31:44] <jackman> philo: do you mean lcd as in palm-top or as in full-size monitor?
  • [23:33:16] <philo> palm top
  • [23:33:23] <philo> touch sensitive if possible
  • [23:33:31] <philo> something like 5 to 7 inch
  • [23:33:36] <philo> 4.3 to 7y inch
  • [23:33:42] <jackman> i didn't know the beagle had a real lcd interface...
  • [23:34:02] <philo> off course the lcd have to have dvi interface
  • [23:34:29] * LegoMeEgo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) has joined #beagle
  • [23:36:39] * pH5 (n=ph5@e178202013.adsl.alicedsl.de) Quit ("bye")
  • [23:37:02] <raster> Gareth: gazza!! how goes scale stuff?
  • [23:37:19] <jackman> philo: http://delicious.com/jadon/lcd
  • [23:37:41] <philo> thanks
  • [23:39:21] <philo> but was looking for something more like this :http://search.digikey.com/scripts/DkSearch/dksus.dll?&keywords=+653-1009-ND
  • [23:40:02] <jackman> oh. you're already way ahead of me, then. :)
  • [23:40:32] <philo> lol
  • [23:40:37] <philo> thanks for your help
  • [23:41:01] <jackman> ya
  • [23:41:11] <jackman> what are you using for an enclosure?
  • [23:41:50] <philo> not really just need a small screen to mess with
  • [23:41:52] * torusle (n=nils@c130161.adsl.hansenet.de) has joined #beagle
  • [23:41:55] <torusle> hi everyone
  • [23:42:00] <jackman> hi you
  • [23:42:14] <Gareth> raster: hey hey :) going well...coming up again very soon. :)
  • [23:42:22] <Gareth> raster: how are you doing?
  • [23:45:22] * docelic (n=docelic@78-2-71-58.adsl.net.t-com.hr) Quit ("http://www.spinlocksolutions.com/")
  • [23:45:40] * djlewis_ , color me gone ...
  • [23:46:28] <raster> Gareth: excellent! - busy as hell here. no spare time really
  • [23:46:47] <Gareth> raster: good problem to have if you're liking what you're doing :)
  • [23:47:56] * djlewis_ (i=41401e0d@gateway/web/freenode/x-ikbhomeleiguwlwh) Quit ("Page closed")
  • [23:50:50] * JoeTheSchmo (n=jciccone@pool-71-187-243-198.nwrknj.fios.verizon.net) Quit (Read error: 110 (Connection timed out))
  • [23:51:59] * wandern (n=wandern@c-67-184-9-62.hsd1.il.comcast.net) has joined #beagle
  • [23:52:11] <Gareth> raster: what are you working on these days?
  • [23:59:02] * davidm1 (n=David@nat/ti/x-zmohwljnpwsajrnb) Quit (Remote closed the connection)