• [00:04:42] * lemay (n=chatzill@ip68-107-86-146.sd.sd.cox.net) Quit (Remote closed the connection)
  • [00:11:17] <djlewis> physis: I found that if you use the DEMO system without the added modules then it does
  • [00:11:32] <djlewis> not see anu usb or any other accessory.
  • [00:12:57] <physis> djlewis, nice! :-) I'm finishing Angstrom-Beagleboard-demo-image download to try here. Thank you
  • [00:13:06] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) has joined #beagle
  • [00:13:34] <djlewis> physis: I was out preparing my telescope for the night ahead.
  • [00:14:20] * Openfree (n=Openfree@222.65.28.197) has joined #beagle
  • [00:14:32] <physis> djlewis, is it plugged on web camera ? ;-)
  • [00:14:57] <djlewis> physis: i read that you sudo untar the fs image in the ext3 then sudo untar the modules in the ext3
  • [00:15:46] <djlewis> physis: like I said, I hae not tried it lately excpet without the modules and that did not work.
  • [00:16:36] <physis> djbclark, ok. I will to use 2.6.29-r37, uImage and modules.It seems to be latest version.
  • [00:17:03] <djbclark> physis: I think you need to make your tab completion more intelligent ;-)
  • [00:17:14] * djbclark (i=djbclark@pdpc/supporter/base/djbclark) has left #beagle
  • [00:17:40] <physis> ops :-)
  • [00:17:53] <physis> well, for now tab problem is solved :D
  • [00:18:31] <djlewis> yep ;)
  • [00:19:14] <djlewis> I dont keep a live cam looking through the telescope. Just at the observatory and when it is dark, nothing shows
  • [00:24:34] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:24:59] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) has joined #beagle
  • [00:30:00] * pfoetchen (n=pfoetche@dslb-094-217-205-054.pools.arcor-ip.net) has joined #beagle
  • [00:34:44] <djlewis> its slowly getting darker..., darker...Darker ... :)
  • [00:36:21] <physis> djlewis, hub 1-0:1.0: unable to enumerate USB device on port 2 :-(
  • [00:36:30] <djlewis> ugh!
  • [00:36:47] <physis> lsusb: Bus 001 Device 001: ID 1d6b:0002
  • [00:36:48] <djlewis> ta need something else to plug in. have a webcam?
  • [00:38:33] <physis> djlewis, nops. I will to try a pendrive.
  • [00:38:53] <djlewis> yes, those usually work.
  • [00:41:31] <djlewis> this is with the normal sized EHCI port next to the sd slot. right?
  • [00:42:15] <physis> no new message, with pendrive, mouse (again).
  • [00:42:21] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:42:29] <physis> djlewis, yes, female A usb conn.
  • [00:42:51] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) has joined #beagle
  • [00:43:02] <physis> or anything else.
  • [00:43:08] <physis> lsusb don't change.
  • [00:43:22] <djlewis> hmmm. or dmesg | tail
  • [00:43:29] <physis> i'm looking for messages with dmesg, because I can't to find log/messages.
  • [00:43:36] <djlewis> yes
  • [00:44:01] <physis> one "hub 1-0:1.0: unable to enumerate USB device on port 2" and no more.
  • [00:44:22] <djlewis> and this test is with the beagleboard demo site files?
  • [00:44:23] <physis> but devices seems powered with this kernel.
  • [00:44:35] <physis> http://www.angstrom-distribution.org/demo/beagleboard/
  • [00:44:42] <physis> this files.
  • [00:45:24] <physis> from http://elinux.org/BeagleBoardBeginners
  • [00:45:47] <djlewis> first or last?
  • [00:45:59] <physis> last
  • [00:46:23] <physis> 2.6.29-r37
  • [00:46:48] <physis> do you think my board can be broken ? Is it new, but... :P
  • [00:46:53] <physis> *did you
  • [00:46:53] <djlewis> yes those are the same as first
  • [00:47:39] <djlewis> I dont know why it should be defective. I was hoping to go through all possibilities I can think of with you.
  • [00:48:26] <physis> you right. well, tomorrow I can put hands on other beagle, I will to test with this system...
  • [00:48:40] <djlewis> did you untar the modules before booting?
  • [00:48:43] <physis> yes.
  • [00:49:02] <djlewis> I will follow your steps if I can tonight.
  • [00:49:36] <physis> :-)
  • [00:49:43] <djlewis> yes, your present SD should work same or better in other beagle
  • [00:50:35] <djlewis> preferably better
  • [00:50:39] <physis> if works fine, board problem.
  • [00:50:41] <physis> yes! :-)
  • [00:51:12] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [00:51:36] <physis> lsusb should print only one Bus Device?
  • [00:51:39] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) has joined #beagle
  • [00:51:43] <djlewis> two
  • [00:51:53] <physis> with this kernel I can see only Bus 001 Device 001: ID 1d6b:0002
  • [00:51:55] <physis> :-/
  • [00:52:01] <djlewis> on revC
  • [00:52:06] <djlewis> I noticed that earlier.
  • [00:52:10] <physis> rec C3, my board.
  • [00:52:23] <physis> with other kernel I can see both
  • [00:52:29] <djlewis> I sae
  • [00:52:32] <djlewis> I saw
  • [00:52:49] <physis> djlewis, sorry, I don't undestand, I guess.
  • [00:53:02] <djlewis> I was going to make a case for my BB this weekend but that didnt happen
  • [00:53:23] <djlewis> you posted your lsusb earlier with both
  • [00:53:47] <physis> yes, but wasn't with this uImage.
  • [00:54:09] <physis> :-P
  • [00:54:29] <djlewis> I know
  • [00:54:40] <physis> I will try other (older) version :P
  • [00:55:40] * djlewis is now known as djlewis_
  • [00:58:02] * djlewis (n=djlewis@65-66-76-175.dsl.tcworks.net) has joined #beagle
  • [01:00:49] <physis> djlewis_, i can see both now...
  • [01:01:00] <physis> but i have hub 1-0:1.0: unable to enumerate USB device on port 2 on dmesg :P
  • [01:01:01] <djlewis> but no mouse?
  • [01:01:13] <physis> nops
  • [01:01:52] <djlewis> its not dark yet, firing up my bb
  • [01:02:14] <physis> djlewis, it's dark here... very dark :)
  • [01:02:20] <djlewis> where are you?
  • [01:03:53] * alecrim (n=alecrim@201008193191.user.veloxzone.com.br) has joined #beagle
  • [01:07:14] <physis> djlewis, Brazil.
  • [01:07:46] <djlewis> cool, i'm in Arkansas USA
  • [01:07:50] <physis> alecrim, bem vindo ao time :)
  • [01:08:50] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 104 (Connection reset by peer))
  • [01:08:51] <djlewis> I'm making a demo SD now
  • [01:09:09] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [01:09:17] <djlewis> i only speak arky :)
  • [01:10:32] <physis> djlewis, nice. I'm very fast from "equator line" - but I don't know if 'equator' is international term hehehe.
  • [01:11:07] <djlewis> equator = 0 degree latitude = yes
  • [01:11:19] <physis> djlewis, so, it's ok :)
  • [01:12:09] <djlewis> basic geography elementery school
  • [01:12:36] <physis> djlewis, it's true. New word to my poor english too hehehe
  • [01:13:40] <djlewis> I have made some effort toward speaking mexican but...
  • [01:14:04] <djlewis> I find my brain wont play an musical intstrument or do languages.
  • [01:14:36] <djlewis> my brain doesnt like algebra and calculus much either.
  • [01:15:23] <djlewis> this is interesting, untar'ing shows lots of modules from DEMO
  • [01:15:39] <physis> djlewis, yes
  • [01:15:51] <djlewis> so i'll add modules anyway?
  • [01:15:57] <djlewis> you did you said.
  • [01:16:53] <djlewis> just trying to follow your steps.
  • [01:17:04] <physis> i copy tgz to mmc / and untar.
  • [01:17:25] <djlewis> looks like it only added a few more.
  • [01:17:44] <djlewis> sync
  • [01:17:47] <djlewis> oops
  • [01:18:27] <physis> ?
  • [01:18:28] <djlewis> the slow part, getting the card ready to eject...
  • [01:21:25] <physis> yes
  • [01:21:47] <djlewis> twice now my bb has stopped at the usb part of boot.
  • [01:23:51] <djlewis> last msg: [ 13.656066] Waiting for root device /dev/mmcblk0p2...
  • [01:25:33] <physis> hummm
  • [01:25:53] <physis> did you put console to ttyS2 ?
  • [01:26:06] <physis> leds are blinking?
  • [01:26:30] <djlewis> I just tried a good fs and it comes up so there is some difference.
  • [01:27:06] <djlewis> normal lsusb:
  • [01:27:07] <physis> humm
  • [01:27:10] <djlewis> Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  • [01:27:10] <djlewis> Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
  • [01:27:10] <djlewis> Bus 002 Device 002: ID 050d:0233 Belkin Components
  • [01:27:10] <djlewis> Bus 002 Device 003: ID 15a9:0004
  • [01:27:10] <djlewis> Bus 002 Device 004: ID 045e:0023 Microsoft Corp. Trackball Optical
  • [01:27:21] <physis> :-(
  • [01:27:32] <djlewis> ID 15a9:0004 is my wireless.
  • [01:27:35] <physis> ok, my board should be broken :-(
  • [01:27:41] <djlewis> this is with a gnome image, not the demo
  • [01:27:46] <physis> ops
  • [01:27:49] <djlewis> I'll go back to the demo now.
  • [01:27:54] <physis> where you find it?
  • [01:28:04] <physis> where can I find it?
  • [01:28:31] <djlewis> sakoman posted recently. hang on
  • [01:30:12] <djlewis> http://www.sakoman.com/
  • [01:32:28] <physis> ok
  • [01:32:34] <physis> I will to download it
  • [01:34:46] <djlewis> physis: http://pastebin.com/m6105d8dc
  • [01:35:23] <djlewis> and the heartbeat is blinking but no fs activity light
  • [01:35:24] <physis> djlewis, nice. I will to try with this image
  • [01:35:54] <djlewis> it is a really cool desktop and sakoman puts a lot of effort into it.
  • [01:35:54] <physis> djlewis, is this files: http://www.sakoman.com/component/option,com_phocadownload/Itemid,60/id,1/view,category/
  • [01:35:56] <physis> ?
  • [01:36:26] <djlewis> at the bottom of the page are dnload buttons
  • [01:36:41] <djlewis> just beagle part
  • [01:37:27] <djlewis> unless you have an overo as well :)
  • [01:37:52] <djlewis> my system clock has gone bonkers.
  • [01:39:35] <physis> ok, i'm downloading.
  • [01:39:56] <djlewis> im installing ntp on my wkstn
  • [01:40:20] <djlewis> my wkstn reset itself to midnight
  • [01:40:32] <djlewis> yesterday
  • [01:43:44] * robtmr (n=robtmr@d75-156-2-19.bchsia.telus.net) Quit (Read error: 131 (Connection reset by peer))
  • [01:43:51] * robtmr (n=robtmr@d75-156-2-19.bchsia.telus.net) has joined #beagle
  • [01:43:54] <djlewis> I dont know why demo wont boot all the way.
  • [01:44:10] <djlewis> but tonight is clear and time to look through telescope :)
  • [01:49:44] <jdog> wish TI didn't get rid of HET :(
  • [01:52:49] * djlewis_ (i=41424caf@gateway/web/freenode/x-asmkxvkgqkhqzqdl) Quit ()
  • [02:00:33] * BThompsonD (n=bernie@cpe-66-25-52-232.tx.res.rr.com) Quit ("Leaving.")
  • [02:22:07] * docelic (n=docelic@78.134.203.8) Quit ("http://www.spinlocksolutions.com/")
  • [02:26:09] <physis> djlewis, bed time for now. Thank you for your help. I will back tomorrow.
  • [02:26:17] <physis> see u guys.
  • [02:26:40] * physis (n=roberto@201008248031.user.veloxzone.com.br) Quit ("beagle!")
  • [02:29:28] * rsalveti (n=rsalveti@189.70.48.107) Quit (Remote closed the connection)
  • [02:31:20] * rsalveti (n=rsalveti@189.70.48.107) has joined #beagle
  • [02:36:21] * lcuk (i=lcuk@cpc3-oldh7-0-0-cust590.manc.cable.ntl.com) Quit ("Leaving")
  • [02:38:36] * xxiao (n=chatzill@24.174.117.226) Quit (Connection timed out)
  • [02:40:44] * xxiao (n=chatzill@24.174.117.226) has joined #beagle
  • [02:48:33] * mrc_001 (n=mrc_001@212-183-117-41.adsl.highway.telekom.at) has joined #beagle
  • [02:49:24] * xxiao (n=chatzill@24.174.117.226) Quit ("ChatZilla 0.9.85 [Firefox 3.0.13/2009080316]")
  • [02:53:19] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [02:54:22] * robclark (n=robclark@192.91.75.29) Quit ()
  • [02:55:13] * alecrim (n=alecrim@201008193191.user.veloxzone.com.br) Quit (Read error: 110 (Connection timed out))
  • [03:00:49] * cody____ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [03:20:13] * cody___ (n=cody@dslb-084-056-117-241.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [03:20:22] * mrc_001 (n=mrc_001@212-183-117-41.adsl.highway.telekom.at) Quit ()
  • [03:45:35] * rkirti is now known as rkirti|zap
  • [03:47:36] * CruNcher (n=luls_lol@dslb-084-058-103-026.pools.arcor-ip.net) Quit ()
  • [03:47:40] * CruNcher (n=luls_lol@dslb-084-058-103-026.pools.arcor-ip.net) has joined #beagle
  • [03:48:51] * pfoetchen (n=pfoetche@dslb-094-217-205-054.pools.arcor-ip.net) Quit ("leaving")
  • [04:01:59] <ds2> *plink*
  • [04:05:37] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [04:06:01] * thaytan_ (n=jan@78.16.53.28) has joined #beagle
  • [04:06:19] * thaytan (n=jan@213-202-138-215.bas502.dsl.esat.net) Quit (Read error: 110 (Connection timed out))
  • [04:12:40] * mrc3 (n=ddiaz@189.157.108.164) has joined #beagle
  • [04:14:34] * jeaneus (n=a0271968@nat/ti/x-dpmjseintkfrtnhi) has joined #beagle
  • [04:15:29] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [04:17:48] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [04:19:40] * jeaneus (n=a0271968@nat/ti/x-dpmjseintkfrtnhi) has left #beagle
  • [04:19:40] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [04:21:12] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [04:29:41] * djlewis (n=djlewis@65-66-76-175.dsl.tcworks.net) Quit ("Leaving.")
  • [04:35:53] * javaJake (n=javaJake@unaffiliated/javajake) Quit ("night")
  • [04:35:54] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [04:37:47] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [04:50:01] * vijay (n=vijay@203.199.213.3) has joined #beagle
  • [04:50:01] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [04:50:43] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [05:00:05] <ds2> DOH
  • [05:00:10] <ds2> 1hour error
  • [05:16:12] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [05:16:24] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [05:21:18] * diorahman (n=Dio@125.163.57.40) has joined #beagle
  • [05:21:30] <diorahman> hi all!
  • [05:24:36] <diorahman> good morning! :-)
  • [05:24:37] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [05:25:49] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [05:34:43] * robtmr (n=robtmr@d75-156-2-19.bchsia.telus.net) Quit (Remote closed the connection)
  • [05:34:44] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [05:42:09] * rupeshgujare (n=rupesh@59.160.172.220) has joined #beagle
  • [05:52:27] * virals (n=Viral_Sa@59.97.2.36) has joined #beagle
  • [05:56:03] * MCTouch (n=MCTouch@5acb05ac.bb.sky.com) has joined #beagle
  • [06:05:15] * jkridner|work (n=a0321898@nat/ti/x-wfyoewtdggpxweyh) Quit (Remote closed the connection)
  • [06:19:39] * diorahman oompa-loompa!
  • [06:19:43] * MCTouch (n=MCTouch@5acb05ac.bb.sky.com) Quit (Read error: 113 (No route to host))
  • [06:39:23] * franktango (n=a0746747@192.91.75.30) has joined #beagle
  • [06:52:07] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [06:53:34] * virals1 (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [06:54:16] * virals (n=Viral_Sa@59.97.2.36) Quit (Read error: 110 (Connection timed out))
  • [06:58:51] * bearsh|work (n=quassel@inst-232.178.zhaw.ch) has joined #beagle
  • [07:07:54] * courville (n=courvill@archos.rain.fr) has joined #beagle
  • [07:15:36] * diorahman (n=Dio@125.163.57.40) Quit ()
  • [07:15:37] * virals1 (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [07:17:11] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [07:19:36] * lcuk (i=lcuk@cpc3-oldh7-0-0-cust590.manc.cable.ntl.com) has joined #beagle
  • [07:25:55] * jpirko (n=jirka@nat/redhat/x-jkdskvpjgqvzsszm) has joined #beagle
  • [07:34:26] * ScriptRipper (n=mmohring@p4FDBD298.dip.t-dialin.net) has joined #beagle
  • [07:35:03] * av500 (n=av500@p50996ded.dip0.t-ipconnect.de) Quit (Remote closed the connection)
  • [07:45:06] * booxter (n=booxter@212.98.182.22) Quit (Read error: 110 (Connection timed out))
  • [07:52:03] * virals1 (n=Viral_Sa@59.97.2.36) has joined #beagle
  • [07:52:29] * PhastPhrog (n=chatzill@ip-87-82-198-210.easynet.co.uk) has joined #beagle
  • [07:52:33] * tsjsieb (n=tsjsieb@dejongbeheer.nl) has joined #beagle
  • [07:52:46] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 110 (Connection timed out))
  • [07:53:28] * wayne_ (i=56ab7252@gateway/web/freenode/x-pwuuliqlcfebtway) has joined #beagle
  • [07:55:25] * _memento_mori_ (n=memento_@89.241.17.2) has joined #beagle
  • [07:57:49] * memento_mori (n=memento_@78.146.46.28) Quit (Read error: 110 (Connection timed out))
  • [08:03:10] * _koen_ (n=x0115699@nat/ti/x-dlzjexyrcuwqubyh) has joined #beagle
  • [08:07:57] * thaytan_ (n=jan@78.16.53.28) Quit (Read error: 113 (No route to host))
  • [08:15:55] * _roger_ (n=a0740758@nat/ti/x-omtvieqdwstgelwb) has joined #beagle
  • [08:25:43] * vhallac (n=vedat@85.103.174.132) has joined #beagle
  • [08:36:56] * _roger_ (n=a0740758@nat/ti/x-omtvieqdwstgelwb) has left #beagle
  • [08:39:14] * courville (n=courvill@archos.rain.fr) Quit ("leaving")
  • [08:42:53] * ogra (n=ogra@ubuntu/member/ogra) Quit (Remote closed the connection)
  • [08:44:21] <wayne_> morning all
  • [08:44:42] * booxter (n=booxter@cpmsq.epam.com) has joined #beagle
  • [08:46:11] * courville (n=courvill@archos.rain.fr) has joined #beagle
  • [08:47:42] * _koen_ (n=x0115699@nat/ti/x-dlzjexyrcuwqubyh) Quit (Remote closed the connection)
  • [08:48:02] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [08:51:32] * thaytan_ (n=jan@nat/sun/x-zhyytjwzakirrwos) has joined #beagle
  • [08:53:00] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [08:53:55] * thaytan_ is now known as thaytan
  • [08:54:21] * virals1 (n=Viral_Sa@59.97.2.36) Quit (Read error: 110 (Connection timed out))
  • [08:55:31] * xie (i=99145f46@gateway/web/freenode/x-jmzjdujdhcfoelti) has joined #beagle
  • [08:56:57] <xie> hi. i am trying to connect a usb hub to beagle board but not successful. I have short pin4 to pin5 of the usb otg.
  • [08:58:02] * colla (n=chatzill@94.92.186.18) has joined #beagle
  • [09:00:28] * _koen_ (n=x0115699@nat/ti/x-kagcivljrzmmfega) has joined #beagle
  • [09:02:09] <colla> Hi, anybody if actually ffmpeg MPEG4 or H264 encoders are already neonified? I'm developing an application that need encoding/streaming and I'm trying to understad if there si an alternative to using DSP. Thank you.
  • [09:06:03] * _roger_ (n=a0740758@nat/ti/x-yndgclwumholeeto) has joined #beagle
  • [09:06:03] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 104 (Connection reset by peer))
  • [09:06:54] * virals (n=Viral_Sa@122.172.148.71) has joined #beagle
  • [09:11:17] * SplasH (i=5dc8f8d8@gateway/web/freenode/x-evshcteixaxngywi) has joined #beagle
  • [09:11:45] <SplasH> hi
  • [09:13:19] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [09:16:21] * ScriptRipper (n=mmohring@opensuse/member/MartinMohring) Quit (Remote closed the connection)
  • [09:16:37] * ScriptRipper (n=mmohring@p4FDBD298.dip.t-dialin.net) has joined #beagle
  • [09:16:37] * ssvb (n=ssvb___@a88-112-120-50.elisa-laajakaista.fi) Quit ("Leaving")
  • [09:18:16] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [09:19:17] <nrossi> Anyone got the SPI-Ethernet Chip from Micrel working with the beagleboard?
  • [09:22:07] <Yuvi> colla: they both are
  • [09:22:54] * dl9pf (n=dl9pf@opensuse/member/dl9pf) Quit (Read error: 110 (Connection timed out))
  • [09:23:23] <SplasH> I've tried to write a oe/bitake recipe for v4l. But I get a file not found error and the kernel version is identified as 2.6.29 but I have 2.6.29-omap1. Here is the recipe: http://pastie.org/592125 and the compile log: http://pastie.org/592124 Can somebody help me?
  • [09:23:55] * tretas (i=529a052f@gateway/web/freenode/x-guabzoocwaifqwpl) has joined #beagle
  • [09:32:48] * _STeVE__ (i=5e5cba12@gateway/web/freenode/x-jtbkepsigkthkwav) has joined #beagle
  • [09:33:52] <colla> thank you yuvi
  • [09:34:41] * virals (n=Viral_Sa@122.172.148.71) Quit (Read error: 110 (Connection timed out))
  • [09:34:48] * amit (i=cb6ef6e6@gateway/web/freenode/x-cclqdofqtkcavadp) has joined #beagle
  • [09:35:01] * virals (n=Viral_Sa@59.97.2.36) has joined #beagle
  • [09:35:16] * amit is now known as Guest20483
  • [09:35:29] * Guest20483 (i=cb6ef6e6@gateway/web/freenode/x-cclqdofqtkcavadp) has left #beagle
  • [09:46:38] * tretas (i=529a052f@gateway/web/freenode/x-guabzoocwaifqwpl) Quit (Ping timeout: 180 seconds)
  • [09:47:25] * xie (i=99145f46@gateway/web/freenode/x-jmzjdujdhcfoelti) Quit ("Page closed")
  • [09:51:18] * Entasis (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) has joined #beagle
  • [09:53:02] * vinstrol (i=96fe95da@gateway/web/freenode/x-ndgbdwmgslvkpipt) has joined #beagle
  • [09:53:09] * hrw|gone is now known as hre
  • [09:53:10] * hre is now known as hrw
  • [09:53:12] <hrw> morning
  • [09:55:17] <SplasH> hi
  • [09:55:17] <wayne_> SplasH: I am doing the exact same thing, I think there is a problem with 2.6.29, I was advised to try 2.6.28 instead
  • [09:56:38] * ogra (n=ogra@ubuntu/member/ogra) Quit ("Verlassend")
  • [09:56:45] * ogra (n=ogra@p5098ed03.dip0.t-ipconnect.de) has joined #beagle
  • [09:57:57] * vinstrol (i=96fe95da@gateway/web/freenode/x-ndgbdwmgslvkpipt) Quit (Client Quit)
  • [09:58:51] * ThomasEgi (n=thomas@pppdyn-54.stud-ko.rz-online.net) has joined #beagle
  • [09:58:55] * _koen_ thinks people using uname is makefiles to find out kernel source location should be shot
  • [09:59:25] * mrc_001 (n=mrc_001@91-113-121-182.adsl.highway.telekom.at) has joined #beagle
  • [09:59:37] * nrossi (n=na@61.37.96.58.static.exetel.com.au) Quit (Read error: 60 (Operation timed out))
  • [10:03:10] <hrw> koen: twice!
  • [10:03:24] <SplasH> wayne_: I found out, that bitbake starts compiling after a second call of bitbake "my_recipe". But it stops when installing with an error from strip. "Unable to recognize the format of the input file". And when I copy the complete build directory on my beagle and start "make install" make copies the modules in /lib/2.6.29 and not in /lib/2.6.29-omap1
  • [10:05:50] <koen> hrw: and I wonder when the people in this channel will notice I answered their "why doesn't my libv4l module build" question
  • [10:16:12] * dl9pf (n=dl9pf@opensuse/member/dl9pf) has joined #beagle
  • [10:19:31] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up and at 'em, Atom Ant!")
  • [10:19:57] * diorahman (n=Dio@125.163.57.40) has joined #beagle
  • [10:20:58] * dcramer (n=davec@dcdsl.ebox.com) Quit (Read error: 113 (No route to host))
  • [10:21:00] * dcramer_ (n=davec@dcdsl.ebox.com) has joined #beagle
  • [10:21:14] * dcramer_ is now known as dcramer
  • [10:23:47] * CruNcher (n=luls_lol@dslb-084-058-103-026.pools.arcor-ip.net) Quit ()
  • [10:27:45] * guillaum1 (n=gl@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [10:28:16] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) has joined #beagle
  • [10:32:59] * XorA|gone is now known as XorA
  • [10:33:30] * wayne_ (i=56ab7252@gateway/web/freenode/x-pwuuliqlcfebtway) Quit ("Page closed")
  • [10:34:28] <SplasH> koen: can you give me please more detailed instructions how to modifiy the makefile? In the compile log I see this enty: "Forcing compiling to version 2.6.29". In the makefile of v4l i can find "@echo "Forcing kernel version to $(VER)." But I don't know where $(VER) is set.. Or am I on a completely false way?
  • [10:42:29] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) Quit (Remote closed the connection)
  • [10:42:38] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) has joined #beagle
  • [10:52:43] * rsalveti (n=rsalveti@189.70.48.107) Quit (Remote closed the connection)
  • [10:59:42] * SplasH (i=5dc8f8d8@gateway/web/freenode/x-evshcteixaxngywi) Quit ("I'll be back later")
  • [11:00:07] * diorahman (n=Dio@125.163.57.40) Quit ()
  • [11:07:08] * booxter (n=booxter@cpmsq.epam.com) Quit (Read error: 54 (Connection reset by peer))
  • [11:07:20] * booxter (n=booxter@cpmsq.epam.com) has joined #beagle
  • [11:13:06] * pfoetchen (n=pfoetche@winc043.informatik.uni-wuerzburg.de) has joined #beagle
  • [11:13:18] <hrw> mru: question I have and you probably know the answer. How to really grab dvd subtitles from DVD during dumping movie?
  • [11:13:33] * mrc_001_ (n=mrc_001@91-114-176-92.adsl.highway.telekom.at) has joined #beagle
  • [11:13:59] * florian_kc (n=fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
  • [11:14:32] * florian_kc is now known as florian
  • [11:19:51] * valhalla (n=valhalla@81-174-25-108.dynamic.ngi.it) Quit ("leaving")
  • [11:20:08] * valhalla (n=valhalla@81-174-25-108.dynamic.ngi.it) has joined #beagle
  • [11:31:31] * mrc_001 (n=mrc_001@91-113-121-182.adsl.highway.telekom.at) Quit (Read error: 110 (Connection timed out))
  • [11:31:31] * mrc_001_ is now known as mrc_001
  • [11:33:06] * vijay (n=vijay@203.199.213.3) Quit ("Leaving.")
  • [11:37:08] * __alanc__ (n=a-campbe@nat/ti/x-colwfqizpbpdzgcl) has joined #beagle
  • [11:50:31] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [11:50:42] * virals (n=Viral_Sa@59.97.2.36) Quit (Remote closed the connection)
  • [11:51:24] * bbbb (i=dce319a2@gateway/web/freenode/x-ptleurupvhkstdsm) has joined #beagle
  • [11:52:59] * ScriptRipper (n=mmohring@opensuse/member/MartinMohring) Quit (Remote closed the connection)
  • [11:53:43] * jserv-- (n=jserv@61.30.10.70) Quit ()
  • [11:56:32] * hybrid_ (i=56ab7252@gateway/web/freenode/x-fqwzkkxeuhgzuufg) has joined #beagle
  • [12:04:33] * javaJake (n=javaJake@unaffiliated/javajake) has joined #beagle
  • [12:06:17] * _memento_mori_ (n=memento_@89.241.17.2) Quit (Read error: 110 (Connection timed out))
  • [12:10:02] * _memento_mori_ (n=memento_@78.148.206.246) has joined #beagle
  • [12:10:34] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) Quit (Remote closed the connection)
  • [12:10:43] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) has joined #beagle
  • [12:13:18] * XorA is now known as XorA|gone
  • [12:15:58] * rkirti|zap is now known as rkirti
  • [12:18:23] * Xerion_ (i=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
  • [12:23:09] * _roger_ (n=a0740758@nat/ti/x-yndgclwumholeeto) Quit (Remote closed the connection)
  • [12:26:13] * _roger_ (n=a0740758@nat/ti/session) has joined #beagle
  • [12:28:11] * robclark (n=robclark@nat/ti/x-ssxismalbhmrvmoa) has joined #beagle
  • [12:29:27] * jserv-- (n=jserv@61.57.131.211) has joined #beagle
  • [12:30:17] * mrc_001 (n=mrc_001@91-114-176-92.adsl.highway.telekom.at) Quit ()
  • [12:32:07] * pfoetchen (n=pfoetche@winc043.informatik.uni-wuerzburg.de) Quit ("leaving")
  • [12:35:09] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (Connection timed out)
  • [12:35:10] * Xerion_ is now known as Xerion
  • [12:36:38] * ssvb (n=ssvb___@viktor.cosmicparrot.net) has joined #beagle
  • [12:37:39] * jkridner|work (n=a0321898@nat/ti/x-ahladyhhhvcvjegf) has joined #beagle
  • [12:41:30] <jkridner|work> good morning all
  • [12:41:36] <jkridner|work> hi diorahman
  • [12:41:46] <jkridner|work> still looking for a couple more talks for http://wiki.omap.com/index.php/ETechDays_Community_Lightning_Talks
  • [12:43:25] <Crofton|work> so we talk to the telephone?
  • [12:43:27] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit (Remote closed the connection)
  • [12:43:30] <Crofton|work> while you flip slides?
  • [12:44:39] <jkridner|work> you can use the WebEx to flip the slides yourself....
  • [12:44:43] <jkridner|work> or I can flip them for you.
  • [12:44:51] <jkridner|work> I will look for questions on the IRC...
  • [12:45:07] <jkridner|work> and put them into the WebEx for you so that you don't have to look at 2 screens.
  • [12:45:09] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [12:45:25] <Crofton|work> but talking is done to phone
  • [12:45:31] <Crofton|work> this will be "weird"
  • [12:45:33] <Crofton|work> brb
  • [12:45:33] <jkridner|work> yes, all the talking is over the phone.
  • [12:46:11] <jkridner|work> so, I will read the questions to you over the phone as well.
  • [12:46:35] <jkridner|work> so, the presenter just needs to worry about the phone and their slides will be on the WebEx.
  • [12:48:19] * kevinsc__ (n=kevinsc@nat/ti/x-ktwxgufnlygljtig) has joined #beagle
  • [12:48:22] * kevinsc__ (n=kevinsc@nat/ti/x-ktwxgufnlygljtig) has left #beagle
  • [12:48:30] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [12:48:46] * jkridner|work must remember that no everyone is used to being in meetings like this all the time (WebEx for slides, phone for presenting, IRC for "backchannel")
  • [12:49:00] <jkridner|work> no=not
  • [12:50:44] * _roger_ doesn't remember life before webex...
  • [12:51:14] * nrossi (n=na@61.37.96.58.static.exetel.com.au) Quit (Client Quit)
  • [12:51:26] * nrossi (n=na@61.37.96.58.static.exetel.com.au) has joined #beagle
  • [12:52:07] <Crofton|work> heh
  • [12:52:22] * Crofton|work remember life before powerpoint
  • [12:52:32] <_roger_> hmmm - tough one :)
  • [12:53:36] * rsalveti (n=rsalveti@200.184.118.130) Quit (Read error: 104 (Connection reset by peer))
  • [12:54:33] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [12:54:44] * greyback (n=greyback@dhcp-892b7bb0.ucd.ie) has joined #beagle
  • [13:00:14] * dl9pf (n=dl9pf@opensuse/member/dl9pf) Quit (Read error: 60 (Operation timed out))
  • [13:01:11] <jkridner|work> mru: can't talk you into something about compilers or FFmpeg?
  • [13:01:26] <jkridner|work> av500: I know you are anxious to say something.
  • [13:01:55] <jkridner|work> I'm trying to get good attendance of TI managers so that they can hear what is being done by the community and they can learn to value it.
  • [13:04:55] * svolpe (n=Gerrath@unaffiliated/gerrath) has joined #beagle
  • [13:11:39] * landswipe (n=david@60-242-188-130.static.tpgi.com.au) Quit ("Leaving.")
  • [13:16:34] * greyback (n=greyback@dhcp-892b7bb0.ucd.ie) Quit ()
  • [13:17:53] * brijesh (n=bksingh@nat/ti/x-txrwfrjdrsbgryvx) has joined #beagle
  • [13:18:14] * dl9pf (n=dl9pf@opensuse/member/dl9pf) has joined #beagle
  • [13:26:52] * bbbb (i=dce319a2@gateway/web/freenode/x-ptleurupvhkstdsm) Quit ("Page closed")
  • [13:29:22] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [13:39:49] * nrossi (n=na@61.37.96.58.static.exetel.com.au) Quit ()
  • [13:40:12] * davidm2 (n=David@nat/ti/x-hqclkgmyxltwfgfp) has joined #beagle
  • [13:43:00] * SplasH (i=5dc8f8d8@gateway/web/freenode/session) has joined #beagle
  • [13:43:01] * cbrake_away is now known as cbrake
  • [13:45:29] * dirk2 (n=dirk@p5B0408F4.dip0.t-ipconnect.de) has joined #beagle
  • [13:48:52] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
  • [13:55:40] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [13:57:54] <SplasH> koen, can you please give me more detailed instructions how I have to modify the makefile from libv4l to get it working with oe/bitbake?
  • [13:58:22] * jserv-- (n=jserv@61.57.131.211) Quit (Read error: 110 (Connection timed out))
  • [14:04:35] * greyback (n=greyback@dhcp-892b7bb0.ucd.ie) has joined #beagle
  • [14:04:37] * PhastPhrog (n=chatzill@ip-87-82-198-210.easynet.co.uk) Quit ("ChatZilla 0.9.85 [Firefox 3.5.2/20090729225027]")
  • [14:10:13] * dl9pf (n=dl9pf@opensuse/member/dl9pf) Quit (Remote closed the connection)
  • [14:11:47] * niclas (n=n-anderb@nat/ti/x-jwtnwzysjiivusdn) has joined #beagle
  • [14:14:05] * dl9pf (n=dl9pf@opensuse/member/dl9pf) has joined #beagle
  • [14:16:26] * dual (n=dual@5.79-160-122.customer.lyse.net) has joined #beagle
  • [14:20:27] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [14:20:48] * jconnolly (n=jconnoll@firebug.buglabs.net) Quit (Remote closed the connection)
  • [14:21:02] * hybrid_ (i=56ab7252@gateway/web/freenode/x-fqwzkkxeuhgzuufg) Quit ("Page closed")
  • [14:21:28] * dl9pf (n=dl9pf@opensuse/member/dl9pf) Quit (Remote closed the connection)
  • [14:24:08] * jconnolly (n=jconnoll@firebug.buglabs.net) has joined #beagle
  • [14:24:28] * svolpe (n=Gerrath@unaffiliated/gerrath) Quit (Read error: 110 (Connection timed out))
  • [14:29:37] <hrw> bye
  • [14:29:40] * hrw is now known as hrw|gone
  • [14:31:16] * tsjsieb (n=tsjsieb@dejongbeheer.nl) Quit ("ChatZilla 0.9.85 [Firefox 3.0.13/2009080315]")
  • [14:32:25] * hybrid_ (i=56ab7252@gateway/web/freenode/x-kntrzzeklufkxmyi) has joined #beagle
  • [14:34:09] * _don_ (n=ddarling@nat/ti/x-taxkztikjkquznte) has joined #beagle
  • [14:34:57] * hybrid_ (i=56ab7252@gateway/web/freenode/x-kntrzzeklufkxmyi) Quit (Client Quit)
  • [14:41:58] * courville (n=courvill@archos.rain.fr) Quit (Read error: 110 (Connection timed out))
  • [14:42:27] * harish (i=75c10a0a@gateway/web/freenode/x-qicksyfjgzhmhbkn) has joined #beagle
  • [14:42:54] <harish> hi
  • [14:43:25] * eFfeM (n=Frans@j192117.upc-j.chello.nl) has joined #beagle
  • [14:43:47] <harish> usb is freezing due to endpoint schedule issue when i use usb keyboard, usb mouse and usb camera
  • [14:44:15] <harish> its reporting WARNING: at drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo +0x94/0xcc() Could not flush host TX0 fifo: csr: 000a
  • [14:45:27] * myhrman (i=miranda@79.136.58.181) has joined #beagle
  • [14:45:59] * vhallac (n=vedat@85.103.174.132) Quit (Read error: 113 (No route to host))
  • [14:46:59] * Openfree (n=Openfree@222.65.28.197) Quit (Remote closed the connection)
  • [14:50:32] * maelcum|uni (n=horst@natr.physik.hu-berlin.de) has joined #beagle
  • [14:51:27] <maelcum|uni> hi. what are the advantages of angstrom over debian on the beagle board?
  • [14:51:49] <maelcum|uni> for me, debian has the advantages that it has thousands of packages and i'm familiar with it.
  • [14:55:03] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [14:55:41] * franktango (n=a0746747@192.91.75.30) has left #beagle
  • [14:56:07] * SplasH (i=5dc8f8d8@gateway/web/freenode/x-shmdbvofbakkncsf) Quit ("Page closed")
  • [14:58:58] * chelli (n=chelli@p54B878CC.dip.t-dialin.net) has joined #beagle
  • [14:59:31] * dirk2 (n=dirk@p5B0408F4.dip0.t-ipconnect.de) Quit (Remote closed the connection)
  • [15:00:49] * Entasis (n=Jarred@ppp121-45-48-214.lns11.adl2.internode.on.net) Quit ("Leaving")
  • [15:01:23] * _roger_ (n=a0740758@nat/ti/x-yvyioocuvhtetyuw) Quit (Remote closed the connection)
  • [15:01:44] * BThompsonD (n=bernie@cpe-66-25-52-232.tx.res.rr.com) has joined #beagle
  • [15:02:09] * jserv-- (n=jserv@61.57.131.211) has joined #beagle
  • [15:03:41] <sol-invictus> hello!
  • [15:03:42] <sakoman__> maelcum|uni: angstrom also has thousands of packages and a very active OMAP developer community
  • [15:04:52] * BThompson (n=a0193480@nat/ti/x-lxrxqfsqablkuldf) has joined #beagle
  • [15:05:24] <sol-invictus> i still have problems with flashing x-load.bin.ift to the beagleboard... first i tried a selfcompiled x-load.bin.ift but then the board will not boot up into u-boot.bin
  • [15:05:42] * jeaneus (n=a0271968@nat/ti/x-dpmjseintkfrtnhi) has joined #beagle
  • [15:05:48] <sol-invictus> now i tried with the original one from http://code.google.com/p/beagleboard/downloads/list
  • [15:06:44] <sol-invictus> but with no success... the board is still not booting x-load from nand
  • [15:12:00] * brolin_ (n=brolin@200.24.16.100) has joined #beagle
  • [15:12:43] <sol-invictus> could it be that there is a problem with flashing x-load on some beagleboards?
  • [15:13:36] <maelcum|uni> sakoman__: who maintains all those packages?
  • [15:13:45] * sli_ (n=sli@195.6.193.205) has joined #beagle
  • [15:14:25] * hybrid_ (i=56ab7252@gateway/web/freenode/x-dkcfnjgqdavrpekr) has joined #beagle
  • [15:14:35] * tretas (i=529a052f@gateway/web/freenode/x-hjpxuvpyylrnrbhe) has joined #beagle
  • [15:14:39] <hybrid_> Hi everyone
  • [15:15:03] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) has left #beagle
  • [15:15:31] <harish> hi anybody have patch for endpoint scheduling issue thats causing WARNING: at drivers/usb/musb/musb_host.c:128 musb_h_tx_flush_fifo +0x94/0xcc() Could not flush host TX0 fifo: csr: 000a
  • [15:16:00] <sol-invictus> koen, i think you have a lot of expirience with flashing x-load on beagleboard... do you have any hints?
  • [15:16:09] * maelcum|uni notes that angstrom seems to be heavily gnome-centric
  • [15:16:21] * katie (n=katierh@nat/ti/x-icgvgpqcimvutsqw) has joined #beagle
  • [15:16:30] <hybrid_> Having some bother with bitbake, I think it is the company proxy, dooes anyone know which mirrors to use as this link does not work anymore http://oesources.org/source/current
  • [15:18:24] <sakoman__> maelcum|uni: there is a fairly large community of OE developers who maintain the recipes/repository
  • [15:18:36] <Crofton> maelcum|uni, we all do
  • [15:18:57] <sakoman__> maelcum|uni: I would hardly say that Angstrom is Gnome-centric!
  • [15:19:02] <Crofton> hybrid_, test fetches with wget if you suspect proxy issues
  • [15:19:14] <Crofton> what is gnome?
  • [15:19:14] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [15:19:20] <maelcum|uni> well, there are no kde packages. maybe it is more accurate to say that it is mobile ui-centric.
  • [15:19:32] <sakoman__> It has taken me a couple of months to add enoung recipes to build a basic Gnome image
  • [15:20:10] <maelcum|uni> anyway, my real reason to try angstrom is so that i use what most others use so i have a better base to complain about the kernel not working.
  • [15:20:15] * jpirko (n=jirka@nat/redhat/x-jkdskvpjgqvzsszm) Quit ("Leaving")
  • [15:20:49] <maelcum|uni> the recommended debian kernels, at least, all have usb (otg) issues in my use case.
  • [15:21:03] <Crofton> heh
  • [15:21:06] <hybrid_> Crofton: wget works fine, I should of been clearer, I am running CVS_TARBELL_STASH="http://oesources.org/sources/current/" but the link is dead. Proxy is blocking cvs traffic
  • [15:21:17] <Crofton> urg
  • [15:21:26] <Crofton> talk to it nerds?
  • [15:21:43] <hybrid_> there hopeless
  • [15:21:57] <Crofton> it is real hard to use OE when popular SCM ports are blocked
  • [15:22:18] <maelcum|uni> running distributed compiles from the board (it's a cross compilation strategy) will lock up the usb hardware after a few minutes. it's a situation with 100% cpu load and networ and disk i/o.
  • [15:22:27] <hybrid_> i'll hit them tomorrow, are there any other ports that I should be aware of?
  • [15:22:30] <maelcum|uni> *network
  • [15:22:36] <maelcum|uni> anyway, will try with angstrom.
  • [15:22:57] <Crofton> hybrid_, I don't know, but we really should start compiling a list
  • [15:24:44] * gokuldha (i=7d16fec7@gateway/web/freenode/x-hrquvalmcpizjdue) has joined #beagle
  • [15:25:41] <gokuldha> Is DVSDK combos can be run on beagle boad?
  • [15:29:37] * jserv-- (n=jserv@61.57.131.211) Quit (Read error: 110 (Connection timed out))
  • [15:29:46] <sol-invictus> gnaaa! problem was a self compiled u-boot.bin - using a binary u-boot.bin worked now... now i can flash x-load.bin.ift on all boards
  • [15:29:56] * courville (n=courvill@archos.rain.fr) has joined #beagle
  • [15:30:16] <hybrid_> I am curious, bare with me I am a little new to this enviroment, but how often are the Beaglebaord resources updated in realtion to the work I have come across on the git trees
  • [15:31:34] <jkridner|work> gokuldha: yes, they can.
  • [15:32:05] <jkridner|work> hybrid_: what are you specifically referring to when you say "Beagleboard resources"?
  • [15:32:48] <hybrid_> there are links in google groups, and the angstrom website
  • [15:33:20] <hybrid_> I figured to have all the latest fixes etc you would be better off compiling a new kernel using bitbake
  • [15:34:10] <hybrid_> resources* kernels, bootloader etc
  • [15:35:56] * infrared_ (i=ce726b42@gateway/web/freenode/x-tyxjrthdvhzpxvtm) has joined #beagle
  • [15:36:18] <infrared_> mr. kridner
  • [15:36:20] <infrared_> ?
  • [15:37:17] <infrared_> I need help from anyone participating in the beagle board sponsored projects
  • [15:37:42] * ddompe (n=ddompe@200.122.155.113) has joined #beagle
  • [15:38:24] * greyback (n=greyback@dhcp-892b7bb0.ucd.ie) Quit ()
  • [15:39:58] <infrared_> is anyone active in this channel
  • [15:40:46] * nhg (n=a0864305@nat/ti/x-pxzxobevcxxdqxih) has joined #beagle
  • [15:40:50] * hybrid_ (i=56ab7252@gateway/web/freenode/x-dkcfnjgqdavrpekr) Quit ("Page closed")
  • [15:43:04] <nhg> can someone give a pointer to getting gstreamer plugins working with OMX using the DSP?
  • [15:43:16] <nhg> I mean over DSPbridge.
  • [15:44:09] * pH5 (n=ph5@e178211085.adsl.alicedsl.de) has joined #beagle
  • [15:44:21] <infrared_> nhg what compiler are you using for the dsp
  • [15:44:46] <nhg> dsp cgtools from TI for C64+
  • [15:45:06] <nhg> 6.0.2 I believe...will have to double check
  • [15:47:02] <infrared_> hmm I wonder if the OMX needs tweaking I havent had any luck on x86 emulation and really need a beagle board to start testing but I am familiar with gstreamer internals
  • [15:47:56] * ssvb (n=ssvb___@viktor.cosmicparrot.net) Quit ("Leaving")
  • [15:48:56] <infrared_> look at this http://lists.helixcommunity.org/pipermail/player-dev/2009-April/004227.html
  • [15:50:24] <infrared_> sorry wrong link
  • [15:51:41] * gokuldha (i=7d16fec7@gateway/web/freenode/x-hrquvalmcpizjdue) Quit ("Page closed")
  • [15:52:26] <infrared_> you may need a TI dsp guru to help you compile for the c64x. Are you using a beagle or just an omap based board?
  • [15:52:31] * keesj (n=keesj@ip49-193-210-87.adsl2.static.versatel.nl) has left #beagle
  • [15:57:16] * guillaum1 (n=GZBA4143@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) Quit ("Leaving.")
  • [15:57:37] * maelcum|uni (n=horst@natr.physik.hu-berlin.de) Quit (Read error: 104 (Connection reset by peer))
  • [15:57:46] * guillaum1 (n=gl@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) has joined #beagle
  • [16:00:32] * _STeVE__ (i=5e5cba12@gateway/web/freenode/x-jtbkepsigkthkwav) Quit ("Page closed")
  • [16:01:23] * calex (n=alexandr@24.130.114.97) has joined #beagle
  • [16:01:50] * infrared_ (i=ce726b42@gateway/web/freenode/x-tyxjrthdvhzpxvtm) Quit ("Page closed")
  • [16:07:57] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [16:14:11] * MCTouch (n=MCTouch@5ad86526.bb.sky.com) has joined #beagle
  • [16:14:15] * thaytan (n=jan@nat/sun/x-zhyytjwzakirrwos) Quit (Read error: 60 (Operation timed out))
  • [16:19:48] * kozak (n=subbu@122.166.48.72) has joined #beagle
  • [16:24:55] * bearsh|work (n=quassel@inst-232.178.zhaw.ch) Quit (Read error: 104 (Connection reset by peer))
  • [16:25:29] * _roger_ (n=a0740758@nat/ti/x-taozvojtydmhbdzo) has joined #beagle
  • [16:27:32] * rsalveti (n=rsalveti@200.184.118.130) Quit (Remote closed the connection)
  • [16:32:06] * dcramer (n=davec@dcdsl.ebox.com) Quit ()
  • [16:32:37] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [16:32:42] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [16:32:53] * benanderson (n=irc@66.225.27.52) has joined #beagle
  • [16:37:24] * jjg (n=jjg@12.40.200.74) has joined #beagle
  • [16:41:40] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [16:42:23] * prpplague (n=dave123_@ppp-70-242-113-205.dsl.rcsntx.swbell.net) has joined #beagle
  • [16:42:24] * harish (i=75c10a0a@gateway/web/freenode/x-qicksyfjgzhmhbkn) Quit ("Page closed")
  • [16:42:26] * benanderson (n=irc@66.225.27.52) Quit (Read error: 60 (Operation timed out))
  • [16:43:09] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [16:45:19] <prpplague> koen ping
  • [16:45:44] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [16:45:54] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [16:49:49] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) Quit (Remote closed the connection)
  • [16:51:02] * brolin_ (n=brolin@200.24.16.100) Quit (Client Quit)
  • [16:51:16] * benanderson (n=irc@63.230.135.220) has joined #beagle
  • [16:59:41] * cody____ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:00:09] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [17:06:18] * myhrman (i=miranda@79.136.58.181) Quit ()
  • [17:06:19] <_koen_> prpplague: pong
  • [17:08:42] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) Quit (Read error: 110 (Connection timed out))
  • [17:11:28] * myhrman (n=quassel@h-79-136-58-95.NA.cust.bahnhof.se) has joined #beagle
  • [17:13:24] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 54 (Connection reset by peer))
  • [17:13:50] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [17:14:35] * benanderson (n=irc@63.230.135.220) Quit (Read error: 110 (Connection timed out))
  • [17:15:25] * kazken3 (n=kazken@p29c2ba.osakac00.ap.so-net.ne.jp) has joined #beagle
  • [17:15:38] * kazken3 (n=kazken@p29c2ba.osakac00.ap.so-net.ne.jp) Quit (Read error: 54 (Connection reset by peer))
  • [17:16:46] * kantha (i=3b5cccec@gateway/web/freenode/x-fhzndaihnlqzbeju) has joined #beagle
  • [17:16:57] <kantha> hi
  • [17:19:39] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:19:58] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [17:20:32] <kantha> HI I am facing problem with booting Devkit8000 board using SD ard
  • [17:20:54] <kantha> Can somebody help me
  • [17:23:55] * kantha (i=3b5cccec@gateway/web/freenode/x-fhzndaihnlqzbeju) Quit (Ping timeout: 180 seconds)
  • [17:25:05] * balajirrao (n=balaji@122.167.16.105) has joined #beagle
  • [17:26:02] * misham (n=misham@207-114-185-249.static.twtelecom.net) has joined #beagle
  • [17:28:00] <ds2> morning
  • [17:29:20] <Crofton> jkridner|work, I am thinking about slides
  • [17:30:08] <ds2> slide flipping? Hmmm this could be difficult
  • [17:31:32] * SplasH (i=5dc8f8d8@gateway/web/freenode/x-epmxvhwtincndcdh) has joined #beagle
  • [17:32:02] <jkridner|work> have you ever seen WebEx?
  • [17:32:07] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [17:32:16] <Crofton> me?
  • [17:32:19] <Crofton> I do not think so
  • [17:32:20] <jkridner|work> I can flip slides for you if that is a problem.
  • [17:32:23] <jkridner|work> either you or ds2.
  • [17:32:28] <Crofton> well, not and remembered it :)
  • [17:32:31] <Crofton> http://openembedded.uservoice.com/pages/6963-general
  • [17:32:41] <Crofton> btw, maybe you should make one for bb.org?
  • [17:32:59] <Crofton> Wednesday, I'll ry and setup webex
  • [17:33:00] <jkridner|work> anyway, since everyone can download the slides and hear you on the phone, the WebEx is a bit redundant.
  • [17:33:05] <Crofton> yeah
  • [17:33:13] <Crofton> but, I should puzzle it out
  • [17:33:24] <ds2> yes, I have seen webex and it didn't play nice
  • [17:33:59] <ds2> jkridner|work: in that case, should I generate a 1 slide per page version of my PDF? (original is not in PPT)
  • [17:34:01] <jkridner|work> I can set one of those up. the code.google.com site was the primary one for feedback, but several tasks have remained untouched for a long time (while others have been picked up and handled quickly)
  • [17:34:16] * misham (n=misham@207-114-185-249.static.twtelecom.net) Quit ()
  • [17:34:27] * misham (n=misham@207-114-185-249.static.twtelecom.net) has joined #beagle
  • [17:34:30] * kevinsc__ (n=kevinsc@nat/ti/x-nougicpwuamtjfcs) has joined #beagle
  • [17:34:33] * misham (n=misham@207-114-185-249.static.twtelecom.net) Quit (Client Quit)
  • [17:34:37] * kevinsc__ (n=kevinsc@nat/ti/x-nougicpwuamtjfcs) has left #beagle
  • [17:34:50] <Crofton> user voice is better for vague things
  • [17:35:02] <Crofton> as opposed to specific problems
  • [17:35:14] <Crofton> I like being able to see what interests people
  • [17:35:32] <Crofton> large numbers of people
  • [17:35:57] <Crofton> I suspect bb.org attracts enough "users" that some "interesting" ideas or issues may emerge
  • [17:38:16] <koen> nice use of quotes
  • [17:39:12] <ds2> koen: regarding your uname complaint; the real answer is people need to learn kbuild
  • [17:39:49] <koen> ds2: indeed
  • [17:40:32] <ds2> koen: learning that also solves the SGX build problems
  • [17:41:20] * davidm2 (n=David@nat/ti/x-hqclkgmyxltwfgfp) Quit (Remote closed the connection)
  • [17:41:38] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:42:02] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [17:43:00] <jkridner|work> Crofton: feel free to give people http://beagleboard.uservoice.com if you think it is a good thing.
  • [17:43:42] <Crofton|work> can you put it on bb.org
  • [17:43:59] <jkridner|work> resources page?
  • [17:44:10] <jkridner|work> (anyone can put it on bb.org)
  • [17:44:15] <jkridner|work> (bb.org is world editable)
  • [17:44:58] * booxter (n=booxter@cpmsq.epam.com) Quit (Read error: 113 (No route to host))
  • [17:46:09] <Crofton|work> heh
  • [17:46:10] <Crofton|work> ok
  • [17:46:14] <Crofton|work> I added an idea :)
  • [17:47:34] * davidm2 (n=David@nat/ti/x-sngjiicqhtjmmiyd) has joined #beagle
  • [17:47:53] <jkridner|work> I updated http://beagleboard.org/discuss/
  • [17:47:55] <ds2> Crofton|wok: replace the main page with the same contents but UUencoded? ;)
  • [17:48:04] <ds2> s/wok/work/
  • [17:50:19] <ds2> btw, if anyone has not been carpet bombed by TI's marketing email, the 430day/MCU day is coming up and apparently the L1x is part of that event
  • [17:51:56] * mrc3_ (n=mrc3@nat/ti/x-mrtyjudbcxxtodtj) has joined #beagle
  • [17:53:32] * courville (n=courvill@archos.rain.fr) Quit (Read error: 110 (Connection timed out))
  • [17:56:34] * rkirti is now known as rkirti|afk
  • [17:56:47] * Sgo (i=9dfdd55e@gateway/web/freenode/x-qtmizdpnyrlneubn) has joined #beagle
  • [17:57:54] <Sgo> Hello, right now i am configuring the serial port of the beagleboard through minicom, can anyone tell me if com1 or com2... is the serial port of the beagleboard?
  • [17:58:56] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:59:38] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [18:00:20] <jkridner|work> Crofton: it would be good if more people see those requests than just me.
  • [18:01:10] <Sgo> does anyone know the bb serial port?
  • [18:01:24] <Sgo> com1, com2???
  • [18:01:35] <Sgo> how can i find that out?
  • [18:01:41] <ds2> who ported dos or windows to the BB?
  • [18:01:49] * calex (n=alexandr@24.130.114.97) Quit ()
  • [18:02:45] <Crofton|work> jkridner|work, hopefully uservoice can help with that
  • [18:02:47] <Crofton|work> :)
  • [18:04:03] <Crofton|work> we should have some of the regulars help seed the list, then send it to the bb list
  • [18:04:35] <Crofton|work> before soliciting random ideas, we should try and get some ones to attract votes :)
  • [18:04:45] * davidm3 (n=David@nat/ti/x-onybsyyjpsfirhxq) has joined #beagle
  • [18:05:24] <ds2> didn't we try that with the BB contest page?
  • [18:06:20] * _memento_mori_ (n=memento_@78.148.206.246) Quit (Remote closed the connection)
  • [18:08:14] * davidm2 (n=David@nat/ti/x-sngjiicqhtjmmiyd) Quit (Remote closed the connection)
  • [18:10:53] <Sgo> anyone?? serial port of the bb,, com1 or com2?
  • [18:11:06] * lazarus404 (i=4d632273@gateway/web/freenode/x-ozrutparapbblbvx) has joined #beagle
  • [18:11:11] <lazarus404> Hey people
  • [18:11:34] <lazarus404> Anyone here know if the beagleboard can run Mame?
  • [18:11:44] <lazarus404> I'm hoping to use it for a home arcade project
  • [18:11:45] <jkridner|work> Sgo: ttyS0?
  • [18:12:15] <jkridner|work> Sgo: do you mean on the beagleboard or on your PC? if you are asking about your PC, it depends where you connected it.
  • [18:12:48] <Sgo> i mean in the beagleboard
  • [18:13:06] <Crofton> lazarus404, it should run mame, but I do not know of anyone that has tried
  • [18:13:58] <lazarus404> Crofton: Thanks. I guess I'll just have to give it a go. My main concern is getting the key emulator harness to run on it
  • [18:14:21] <lazarus404> Theoretically it should, as it just mimics a keyboard, but I think the I-Pac uses seperate drivers
  • [18:14:29] <lazarus404> Thanks again
  • [18:14:31] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [18:14:34] <jkridner|work> Sgo: it is ttyS2.
  • [18:14:51] <Crofton> lazarus404, let us know how it goes :)
  • [18:15:04] * cody___ (n=cody@dslb-084-056-082-001.pools.arcor-ip.net) has joined #beagle
  • [18:15:31] <Sgo> Thanks jkridner|work
  • [18:16:06] * _roger_ (n=a0740758@nat/ti/x-taozvojtydmhbdzo) Quit ("Leaving.")
  • [18:18:52] * Crofton grumbles
  • [18:18:56] <Crofton> too many slidees
  • [18:19:13] <Crofton> trying to cut down the presentation from mil-oss
  • [18:19:21] * MCTouch (n=MCTouch@5ad86526.bb.sky.com) Quit ()
  • [18:21:04] * rkirti|afk is now known as rkirti
  • [18:23:43] * DoctorC (i=55de054e@gateway/web/freenode/x-grbghbjlqixorsyt) has joined #beagle
  • [18:25:08] <jkridner|work> lazarus404: I know it runs fba2x (final burn alpha)
  • [18:26:16] <javaJake> Crofton: try the delete key.
  • [18:26:35] <javaJake> I find it deletes slides and other things quite nicely.
  • [18:26:37] <Crofton> I did :)
  • [18:26:40] <javaJake> :D
  • [18:29:21] <ds2> lazarus404: have you checked with the Pandora guys? they may have it going
  • [18:32:28] * koen is slightly annoyed that the OE changes for touchbook only seem to be available as .zip files attached to a wiki
  • [18:33:21] <lazarus404> jkridner|work: Thanks, that's good news
  • [18:33:40] * TurkSA (i=c636ca92@gateway/web/freenode/x-xxrtkqwlnvcplrrn) has joined #beagle
  • [18:33:44] <lazarus404> ds2: Yeah, Pandora have it running. I know the device has the same CPU, so that's promising
  • [18:34:35] * lazarus404 (i=4d632273@gateway/web/freenode/x-ozrutparapbblbvx) Quit ("Page closed")
  • [18:34:38] <ds2> lazarus404: then there is a good chance the same binaries may just work
  • [18:34:39] <ds2> DOH
  • [18:35:16] <ds2> koen: be ready to get even more annoyed at me ;) (the reason will be left as an exercise)
  • [18:35:33] <javaJake> "DOH"?
  • [18:35:52] <javaJake> As in, so obvious lazarus404 ought to have known?
  • [18:36:12] <ds2> DOH as in I hit enter just after he vanished
  • [18:36:15] <ds2> BBL
  • [18:37:03] <janneg> koen: it's better than a handwritten diff posted on a pinboard
  • [18:49:21] * balajirrao (n=balaji@122.167.16.105) Quit ("Leaving")
  • [18:51:39] * bobkatzz (i=43a6a4bb@gateway/web/freenode/x-ditupdouhquosfra) has joined #beagle
  • [18:52:24] <bobkatzz> hey guys - gm/afternoon
  • [18:52:30] <bobkatzz> just went over the previous convestations on the talks - visavis - voidce, flipping etc.
  • [18:53:02] <bobkatzz> trying to get my slides down from 12 to more like 6 hehe
  • [18:53:51] <Crofton|work> heh
  • [18:54:04] <Crofton|work> I think I going in with lots of slides
  • [18:54:09] <Crofton|work> and will adapt
  • [18:54:30] <bobkatzz> Crofton|work: not sure how much SDR bg you are going to go over on your talk - and I don't want to be redundant so I'll email you a link to my slides before I post them if that's ok
  • [18:54:48] <bobkatzz> so there's not too much overlap
  • [18:55:07] <Crofton|work> I'm avoiding amateur radio
  • [18:55:18] <Crofton|work> I have a couple of slides on sdr and hdr
  • [18:55:46] <bobkatzz> however - mine will eventually be targeted at hams and some may not know alot about SDR so I can always put them back in
  • [18:55:52] <suihkulokki> mmh.. beagle+sdr as gsm basestation?
  • [18:55:54] <Crofton|work> basically, I'll try hard to see your talk
  • [18:56:10] <Crofton|work> and try to adpat to the audience
  • [18:56:18] <Crofton|work> suihkulokki, see openbts
  • [18:56:33] <bobkatzz> ok so I'm going over rigs types before and after BeagleBrick
  • [18:56:50] <bobkatzz> so that sounds good - not much overlap
  • [18:57:21] * rkirti (n=oespirit@203.199.213.3) Quit (Read error: 110 (Connection timed out))
  • [18:57:23] * jrmuizel (n=jrmuizel@nat/mozilla/x-xpawzrneekgbejau) has joined #beagle
  • [18:57:29] <koen> speaking of hams, time to make dinner
  • [18:57:33] <bobkatzz> mainly that DSP got transferred to the PC , rigs can get smaller - and now with BB the PC also got smaller = BeagleBrick
  • [18:58:08] <bobkatzz> hehe - koen what kind?
  • [18:58:22] <suihkulokki> Crofton|work: cool :)
  • [18:58:37] <bobkatzz> Jamon, Country, Smithfield or Black Forest?
  • [18:59:32] <muriani> Honey-baked!
  • [18:59:43] <bobkatzz> mmmm yeah forgot that one
  • [18:59:53] <bobkatzz> or mustaard and honey
  • [19:00:06] <bobkatzz> with cloves stuck in B^)
  • [19:00:22] <bobkatzz> ok - back to those pesky slides then
  • [19:00:31] <bobkatzz> bbl
  • [19:01:46] <Crofton|work> http://beagleboard.uservoice.com/pages/27147-general
  • [19:01:47] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) has joined #beagle
  • [19:01:53] <Crofton|work> nags for more seed ideas
  • [19:03:33] * nhg (n=a0864305@nat/ti/x-pxzxobevcxxdqxih) has left #beagle
  • [19:06:10] * DoctorC (i=55de054e@gateway/web/freenode/x-grbghbjlqixorsyt) Quit (Ping timeout: 180 seconds)
  • [19:06:56] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [19:13:55] <javaJake> Crofton: daisies
  • [19:17:04] * dcramer (n=davec@dcdsl.ebox.com) Quit ()
  • [19:17:52] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [19:24:02] <Crofton> anyone know if this works with the beagle
  • [19:24:03] <Crofton> http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=T1022-P5P-ND
  • [19:24:24] <Crofton> the hw page links to a part no longer available, this is listed as a sub
  • [19:36:54] <muriani> Looks like it would
  • [19:37:05] <muriani> I just use a wart from a D-Link USB hub
  • [19:37:09] <muriani> works perfectly :p
  • [19:38:32] * tzhau__ (n=tzhau@proxy1.sun.ac.za) Quit (Remote closed the connection)
  • [19:38:52] <Crofton> yeah, it is a little shorter
  • [19:43:21] * djlewis_ (i=41401e0d@gateway/web/freenode/x-aiaaowombrpdljbu) has joined #beagle
  • [19:43:55] <djlewis_> wwouldn't it be interesting if the DC side plug fits 110 socket ;)
  • [19:44:41] <djlewis_> oh never mind, the picthres were no complete.. :(
  • [19:44:49] <djlewis_> pictures.
  • [19:45:06] <djlewis_> gm all
  • [19:51:14] * Xerion_ (i=xerion@82-170-197-160.ip.telfort.nl) has joined #beagle
  • [19:53:42] <Crofton> crap, I used to have tons of those silly db9 serial connectors
  • [19:55:58] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up and at 'em, Atom Ant!")
  • [19:59:03] * jrmuizel_ (n=jrmuizel@nat/mozilla/x-nfbmtevoqgbrfhva) has joined #beagle
  • [19:59:08] * jrmuizel_ (n=jrmuizel@nat/mozilla/x-nfbmtevoqgbrfhva) Quit (Remote closed the connection)
  • [20:02:32] * jrmuizel (n=jrmuizel@nat/mozilla/x-xpawzrneekgbejau) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:32] * guillaum1 (n=gl@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:32] * ThomasEgi (n=thomas@pppdyn-54.stud-ko.rz-online.net) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:32] * mru (n=mru@hotblack.mansr.com) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:32] * janneg (n=janne@tichy.grunau.be) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:32] * _av500_ (n=av500@81-89-106-31.blue.kundencontroller.de) Quit (wolfe.freenode.net irc.freenode.net)
  • [20:02:52] * jcorgan (n=jcorgan@64-142-68-61.dsl.static.sonic.net) has joined #beagle
  • [20:03:45] * mru (n=mru@hotblack.mansr.com) has joined #beagle
  • [20:04:00] * _av500_ (n=av500@81-89-106-31.blue.kundencontroller.de) has joined #beagle
  • [20:04:19] * janneg (n=janne@tichy.grunau.be) has joined #beagle
  • [20:04:23] * viny (i=53e4ac79@gateway/web/freenode/x-mxstwzhtigizqlsy) has joined #beagle
  • [20:04:32] * jrmuizel (n=jrmuizel@nat/mozilla/x-xpawzrneekgbejau) has joined #beagle
  • [20:04:32] * guillaum1 (n=gl@AMontsouris-153-1-47-122.w90-2.abo.wanadoo.fr) has joined #beagle
  • [20:04:32] * ThomasEgi (n=thomas@pppdyn-54.stud-ko.rz-online.net) has joined #beagle
  • [20:04:35] * jrmuizel (n=jrmuizel@nat/mozilla/x-xpawzrneekgbejau) Quit (Success)
  • [20:04:38] * Foolean (n=emil@90-227-176-224-no128.tbcn.telia.com) Quit (Remote closed the connection)
  • [20:04:49] * Foolean_ (n=emil@90-227-176-224-no128.tbcn.telia.com) has joined #beagle
  • [20:05:19] * viny (i=53e4ac79@gateway/web/freenode/x-mxstwzhtigizqlsy) Quit (Client Quit)
  • [20:05:53] * dual (n=dual@5.79-160-122.customer.lyse.net) Quit (Remote closed the connection)
  • [20:07:42] * thaytan (n=jan@78.16.53.28) has joined #beagle
  • [20:07:44] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (Connection timed out)
  • [20:09:08] * Xerion_ is now known as Xerion
  • [20:09:49] * eFfeM1 (n=Frans@j192117.upc-j.chello.nl) has joined #beagle
  • [20:09:57] * Wiedi (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [20:10:05] * rnychka (i=c05b4b1d@gateway/web/freenode/x-zcawkevsmxvaxwpx) has joined #beagle
  • [20:10:16] * rnychka (i=c05b4b1d@gateway/web/freenode/x-zcawkevsmxvaxwpx) Quit (Client Quit)
  • [20:12:25] * florian (n=fuchs@f048047073.adsl.alicedsl.de) has joined #beagle
  • [20:19:20] <Crofton> jcorgan, ping
  • [20:19:50] <Crofton> I'm checking a straight build now
  • [20:19:55] <vlad> where there's often a multi-ms delay when accessing them
  • [20:20:01] <Crofton> the portaudio failure is curious
  • [20:20:01] <jcorgan> ping
  • [20:20:10] <Crofton> it is pong :)
  • [20:21:23] <jcorgan> it's doing the console-image build now, so it could be a while
  • [20:22:00] <jcorgan> i didn't see a canonical git repo for bb
  • [20:22:30] <Crofton> it was in svn, but I think it is moving to git
  • [20:22:39] <Crofton> I suspect the docs shoudl change :)
  • [20:23:02] <jcorgan> the openmoko site has a git repo for it, but i wasn't sure that was "good enough"
  • [20:23:39] <Crofton> yeah
  • [20:23:51] <Crofton> I'll have to check in #oe
  • [20:23:55] * _roger_ (n=a0740758@nat/ti/x-ikpyebttrltzccbf) has joined #beagle
  • [20:24:23] <Crofton> what';s the etech days url again?
  • [20:24:48] <jcorgan> ?
  • [20:25:38] <Crofton|work> http://wiki.omap.com/index.php/ETechDays_Community_Lightning_Talks
  • [20:25:40] <Crofton|work> that one
  • [20:25:59] <Crofton|work> I am talking on sdr
  • [20:26:17] <Crofton|work> also bobkatzz is talking about amateur radio oriented sdr
  • [20:28:45] * SplasH (i=5dc8f8d8@gateway/web/freenode/x-epmxvhwtincndcdh) Quit ("Page closed")
  • [20:28:46] <jcorgan> it's at 550 of 3253 right now--so I'll check back here with you in a few hours
  • [20:29:02] <Crofton|work> yeah
  • [20:29:06] <Crofton|work> it takes a while
  • [20:29:12] <Crofton|work> faster if you use || make
  • [20:29:26] <jcorgan> I do have 8 cores, I should try that :-)
  • [20:29:32] * eFfeM (n=Frans@j192117.upc-j.chello.nl) Quit (Read error: 110 (Connection timed out))
  • [20:29:33] <Crofton|work> ah
  • [20:29:47] <Crofton|work> only 2 here, but the machine is dedicated
  • [20:29:59] <Crofton|work> on machine I type at, I only use one, so I ahve a core :)
  • [20:30:27] <jcorgan> i have other work to do in the meantime, so i'll use the other 7
  • [20:31:11] * Foolean_ is now known as Foolean
  • [20:31:12] <Crofton|work> I need to go shopping
  • [20:33:31] <jcorgan> http://www.colfax-intl.com/
  • [20:33:46] * koen would stay away from brokenmoko git repos in general
  • [20:33:56] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
  • [20:34:41] <Crofton|work> we need to check getting started ,,,
  • [20:35:07] <Crofton|work> uploading slides ....
  • [20:35:37] <Crofton|work> koen, how was the party?
  • [20:36:36] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [20:37:16] * eFfeM1 is now known as eFfeM
  • [20:38:13] <koen> Crofton|work: awesome, I even managed to watch Calexico perform before starting one of my shifts :)
  • [20:40:01] * jcorgan (n=jcorgan@64-142-68-61.dsl.static.sonic.net) has left #beagle
  • [20:44:14] <Crofton|work> slides up
  • [20:45:50] * ant__ (n=andrea@host88-250-dynamic.2-87-r.retail.telecomitalia.it) has joined #beagle
  • [20:54:31] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [20:57:27] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [20:58:55] <bobkatzz> nice - not too much overlap there - abit but with different emphasis - will be uploading later today (hey - um bobkatzz - it's already later :P) heh
  • [20:59:18] <Crofton|work> great
  • [20:59:38] <Crofton|work> we need to be able to handle people who do not watch both :)
  • [20:59:49] <bobkatzz> yeah - true
  • [21:01:09] <bobkatzz> I'm still hacking some illustrations in Flash so they can be imported into PPT (BTW - can you save PPT as PDF? - I noticed PicoFlamingo had several variants of their's)
  • [21:05:42] * TurkSA (i=c636ca92@gateway/web/freenode/x-xxrtkqwlnvcplrrn) Quit ("Page closed")
  • [21:06:11] <ant__> bobkatzz: sorry if I jump in...
  • [21:06:35] <ant__> my wife is 'graphist' and received a strange question: deliver a work in PPT
  • [21:06:53] <bobkatzz> ant__: what's up?
  • [21:06:58] <ant__> I told her that format su** for professional graphic
  • [21:07:07] <ant__> she usually uses Adobe suite
  • [21:07:25] <ant__> she complain she could not export to PPT
  • [21:07:43] <ant__> can you enlighten me (or post some links?)
  • [21:07:46] <ant__> pls?
  • [21:08:10] <bobkatzz> personnaly I hate PPT - it's a memory freakin hawg and is not TRUELY portable (niether is PDF either) so I like to do everything in Flash and send it to my web site - but
  • [21:08:35] <bobkatzz> this time I'm conforming to the format requested
  • [21:08:49] <Crofton> I'm using OO and exporting pdf
  • [21:08:56] <bobkatzz> and I can easily revert them to Flash - in a um - FLash!! :P
  • [21:09:04] <ant__> I see, the point is the work is for printing...I can't image it in PPT
  • [21:09:24] <bobkatzz> somebody's smoking crack hehe
  • [21:09:38] <ant__> I'd need a PDF->PPT
  • [21:09:47] <bobkatzz> Adobe Illustrator would be that absolute best but I don't have it
  • [21:09:51] <ant__> if any crazy soul would ever write it
  • [21:10:30] <ant__> I see we share same opinion about customer requests
  • [21:10:35] <ant__> thx anyway
  • [21:10:56] <bobkatzz> Flash <- -- - - Asobe Illustrator ----> any other format + it's vector graphics - blow it up to the size of Rhoad Island - no degradation!
  • [21:11:27] * _roger_ (n=a0740758@nat/ti/x-ikpyebttrltzccbf) Quit (Remote closed the connection)
  • [21:11:38] <bkero> Use inkscape
  • [21:11:52] <ant__> once was Xpress for special jobs, now InDesign can dut the mustard (wife says)
  • [21:11:52] <bobkatzz> the consultant's first and most critical taks it to wrest control from the client's cold dead hands (creatively speaking of course hehe)
  • [21:11:59] <bobkatzz> task
  • [21:12:04] <ant__> he he
  • [21:12:31] <bobkatzz> really - that's pretty much what Agile is all about - even though that can be abused also
  • [21:13:22] * edufelipe (n=edufelip@189.4.103.43) has joined #beagle
  • [21:13:56] <bobkatzz> beagle - oh crapp all this time I thought was #eagle!! ;)
  • [21:14:25] * eFfeM (n=Frans@j192117.upc-j.chello.nl) has left #beagle
  • [21:15:08] <ant__> you guys here in beagle will need soon a new challenge...the puzzle is almost completed (puzzle = kernel + 140 patches some time ago...)
  • [21:17:42] * _roger_ (n=a0740758@nat/ti/x-iafglxmfumabfhqe) has joined #beagle
  • [21:18:42] * edufelipe (n=edufelip@189.4.103.43) Quit ()
  • [21:19:00] * edufelipe (n=edufelip@189.4.103.43) has joined #beagle
  • [21:24:19] * chelli (n=chelli@debian/developer/tschmidt) Quit ("IRC is just multiplayer notepad")
  • [21:25:49] * Sgo_ (i=9dfdd55e@gateway/web/freenode/x-gxiycfoekngwkilj) has joined #beagle
  • [21:26:30] <Sgo_> Hey, has anyone have problems getting information with the microcontroler through the serial port?
  • [21:30:30] * dcramer (n=davec@dcdsl.ebox.com) Quit ()
  • [21:34:09] * dcramer (n=davec@dcdsl.ebox.com) has joined #beagle
  • [21:34:11] * wardred (n=wardred@75.142.253.144) has joined #beagle
  • [21:35:50] <Sgo_> Hey, has anyone have problems getting information with the microcontroler through the serial port?
  • [21:37:52] <Sgo_> is the same to adquire signals to the beagleboard that to any pc??
  • [21:39:17] <muriani> hm
  • [21:39:19] <muriani> not sure
  • [21:39:31] <muriani> it tends to redirect console to ttyS0 I think
  • [21:39:46] <muriani> you'd need to disable that so you can use it, I would guess.
  • [21:40:05] <Sgo_> well, i have already configured minicom
  • [21:40:54] <Sgo_> and i have simulated the circuit for the microcontroler, but i cannot see any output on the beagleboard screen
  • [21:41:15] <Sgo_> the max232 is working just fine
  • [21:43:20] <muriani> also, you're using nullmodem wiring for serial, right?
  • [21:44:36] <Sgo_> I am using 2 cables, one RX and GND, cause right now i'm just sending something to the bb, but not recieving
  • [21:44:56] <Sgo_> could that be the problem?
  • [21:45:16] <muriani> dunno
  • [21:45:32] <muriani> I've limited experience with serial communications
  • [21:45:53] <djlewis_> just beagle rx and gnd should do
  • [21:47:31] <Sgo_> then i'm lost
  • [21:47:58] <Sgo_> it also works with TTL (+- 12) levels, right?
  • [21:49:15] <djlewis_> only the 10-pin header
  • [21:49:42] <djlewis_> it is said to be rs-232
  • [21:50:00] <Sgo> I see...
  • [21:50:28] <Sgo> minicom should show something
  • [21:50:34] <Sgo> but it doesn't
  • [21:52:12] * alecrim (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
  • [21:52:22] <djlewis_> do you have an o-scope?
  • [21:53:13] <Sgo> I do yes..
  • [21:53:28] <Sgo> i can see the information
  • [21:54:10] <Sgo> i mean like the levels
  • [21:54:46] <djlewis_> two things come to mind, either you are not on the beagle rx pin or your port is not configured in BB software
  • [21:55:03] <Sgo> minicom always says offline
  • [21:55:10] <ds2> it will always say offline
  • [21:55:13] <djlewis_> earlier muriani mentioned config
  • [21:55:13] <ds2> this is a 3 wire interface
  • [21:55:39] <Sgo> i configured the com3 port
  • [21:56:13] <djlewis_> what com3 port, your PC?
  • [21:56:19] <Sgo> no the beagle
  • [21:56:30] <Sgo> i mean dev/ttys2
  • [21:56:34] <djlewis_> ok
  • [21:56:35] <ds2> there is no such thing as COM3 on the Beagle
  • [21:56:41] <Sgo> oh sorry
  • [21:56:48] <Sgo> i mean ttys2
  • [21:58:44] <djlewis_> Sgo: your sig in should be on BB pin 2
  • [21:58:56] <Sgo> Ok guys thanks for your help, i'm looking on the o-scope
  • [21:59:01] <Sgo> i have it on the pin 2
  • [21:59:08] <Sgo> thanks for your help
  • [21:59:18] <djlewis_> sounds like software.
  • [22:00:25] <Sgo> i'll check it out
  • [22:00:28] <Sgo> thanks again
  • [22:01:07] * Wiedi (n=wiedi@newton-air.w.fruky.net) Quit ("^C")
  • [22:03:15] * kati1 (n=a0270521@nat/ti/x-iikfpogeivirwjgy) has joined #beagle
  • [22:03:39] * ThomasEgi (n=thomas@pppdyn-54.stud-ko.rz-online.net) Quit (Remote closed the connection)
  • [22:03:47] * katie (n=katierh@nat/ti/x-icgvgpqcimvutsqw) Quit ()
  • [22:04:39] * davidm2 (n=David@nat/ti/x-axljaaxgngdusxwu) has joined #beagle
  • [22:06:16] * kati1 is now known as katie
  • [22:09:34] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
  • [22:10:11] * thaytan_ (n=jan@78.16.118.118) has joined #beagle
  • [22:12:42] * davidm3 (n=David@nat/ti/x-onybsyyjpsfirhxq) Quit (Remote closed the connection)
  • [22:25:01] * bmc_ (n=bmc@7-183-126-200.fibertel.com.ar) has joined #beagle
  • [22:25:43] * thaytan (n=jan@78.16.53.28) Quit (Read error: 101 (Network is unreachable))
  • [22:29:24] * _roger_ (n=a0740758@nat/ti/x-iafglxmfumabfhqe) Quit (Remote closed the connection)
  • [22:32:21] * katie (n=a0270521@nat/ti/x-iikfpogeivirwjgy) has left #beagle
  • [22:33:50] * wardred (n=wardred@75.142.253.144) Quit (Remote closed the connection)
  • [22:38:13] * katie (n=a0270521@nat/ti/x-jzkbdwntwvhygoaf) has joined #beagle
  • [22:39:06] * davidm2 (n=David@nat/ti/x-axljaaxgngdusxwu) Quit (Remote closed the connection)
  • [22:40:05] * katie (n=a0270521@nat/ti/x-jzkbdwntwvhygoaf) has left #beagle
  • [22:42:19] * katie (n=a0270521@nat/ti/x-kaydggbhublcpnyg) has joined #beagle
  • [22:43:14] * mrc_001 (n=mrc_001@91-114-180-60.adsl.highway.telekom.at) has joined #beagle
  • [22:43:47] * tretas (i=529a052f@gateway/web/freenode/x-hjpxuvpyylrnrbhe) Quit (Ping timeout: 180 seconds)
  • [22:46:14] * pH5 (n=ph5@e178211085.adsl.alicedsl.de) Quit ("bye")
  • [22:49:22] * rsalveti (n=rsalveti@200.184.118.130) Quit (Remote closed the connection)
  • [22:52:52] * brijesh (n=bksingh@nat/ti/x-txrwfrjdrsbgryvx) Quit ()
  • [22:54:20] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ()
  • [22:57:14] * ant__ (n=andrea@host88-250-dynamic.2-87-r.retail.telecomitalia.it) Quit ("Leaving")
  • [22:59:36] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [23:00:59] * __alanc__ (n=a-campbe@nat/ti/x-colwfqizpbpdzgcl) Quit ()
  • [23:04:48] * jkridner|work (n=a0321898@nat/ti/x-ahladyhhhvcvjegf) Quit ("Leaving.")
  • [23:11:18] * florian (n=fuchs@f048047073.adsl.alicedsl.de) Quit ("Verlassend")
  • [23:11:20] * robclark (n=robclark@nat/ti/x-ssxismalbhmrvmoa) Quit ()
  • [23:12:00] * pfoetchen (n=pfoetche@dslb-188-098-005-173.pools.arcor-ip.net) has joined #beagle
  • [23:21:08] * KadirB (n=kadir@212.174.90.98) has joined #beagle
  • [23:21:58] * ldesnogu (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ("Leaving")
  • [23:22:01] <KadirB> hi , has someone tried to use 3g usb hspda modem on beagleboard?
  • [23:22:59] * BThompson (n=a0193480@nat/ti/x-lxrxqfsqablkuldf) Quit (Remote closed the connection)
  • [23:23:09] <KadirB> http://oozie.fm.interia.pl/pro/huawei-e220/ seems not applicable
  • [23:26:51] <KadirB> sorry for e620
  • [23:33:57] * vitaly_ (n=vitaly@64-71-26-218.static.wiline.com) Quit (Read error: 104 (Connection reset by peer))
  • [23:35:19] * vitaly_ (n=vitaly@64-71-26-218.static.wiline.com) has joined #beagle
  • [23:35:37] * pfoetche1 (n=pfoetche@dslb-188-098-005-173.pools.arcor-ip.net) has joined #beagle
  • [23:48:25] * djlewis_ says later guys...
  • [23:48:56] * djlewis_ (i=41401e0d@gateway/web/freenode/x-aiaaowombrpdljbu) Quit ()
  • [23:49:08] * jeaneus (n=a0271968@nat/ti/x-dpmjseintkfrtnhi) has left #beagle
  • [23:50:06] * pfoetchen (n=pfoetche@dslb-188-098-005-173.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [23:50:14] * docelic (n=docelic@78.134.202.224) has joined #beagle
  • [23:51:32] * archae0pteryx (n=snewman@207.47.42.130.static.nextweb.net) Quit (Read error: 110 (Connection timed out))
  • [23:51:45] * KadirB (n=kadir@212.174.90.98) Quit (Read error: 60 (Operation timed out))
  • [23:55:57] * robclark (n=robclark@nat/ti/x-yeketluyefksrsbe) has joined #beagle
  • [23:59:25] * dcramer (n=davec@dcdsl.ebox.com) Quit ()