• [00:03:52] * mib_dqz1wu (i=4474c32d@gateway/web/ajax/mibbit.com/x-7feb93892e523abe) Quit ("http://www.mibbit.com ajax IRC Client")
  • [00:42:07] * agoode (n=agoode@2001:4978:1aa:0:212:3fff:fe70:6222) has joined #beagle
  • [00:53:10] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [00:59:31] * leslie__ (n=leslie@116.228.58.74) Quit (Remote closed the connection)
  • [01:00:23] * leslie__ (n=leslie@116.228.58.74) has joined #beagle
  • [01:03:05] * Yuvi_ is now known as Yuvi
  • [01:12:14] * ali_as is now known as as_leep
  • [01:22:43] * ZeZu (n=null@c-98-227-56-17.hsd1.in.comcast.net) Quit (No route to host)
  • [01:27:15] * CruNcher (n=luls_lol@dslb-084-058-152-026.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [01:29:03] * CruNcher (n=luls_lol@dslb-084-058-177-071.pools.arcor-ip.net) has joined #beagle
  • [01:29:32] * Ragha (n=Ragha@nat/ti/x-ee2bbc457ab3ca5e) Quit ("Leaving")
  • [01:31:03] * MostAwesomeDude (n=simpson@c-98-232-178-218.hsd1.or.comcast.net) has joined #beagle
  • [01:37:33] * j_ack (n=rudi@dsbg-4db5f9f5.pool.einsundeins.de) Quit ("Verlassend")
  • [01:59:40] * Batko_Marto (n=Batko_Ma@CPE001346f996d2-CM001e6b1a8d1e.cpe.net.cable.rogers.com) Quit (Remote closed the connection)
  • [02:00:01] * Batko_Marto (n=Batko_Ma@CPE001346f996d2-CM001e6b1a8d1e.cpe.net.cable.rogers.com) has joined #beagle
  • [02:08:09] * CruNcher (n=luls_lol@dslb-084-058-177-071.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [02:09:50] <djlewis> quiet day here in the channel
  • [02:10:35] * CruNcher (n=luls_lol@dslb-084-058-172-137.pools.arcor-ip.net) has joined #beagle
  • [02:20:55] * CruNcher (n=luls_lol@dslb-084-058-172-137.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [02:22:24] * CruNcher (n=luls_lol@dslb-084-058-185-202.pools.arcor-ip.net) has joined #beagle
  • [02:24:14] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  • [02:37:31] * mib_ge87g2 (i=ca85eba4@gateway/web/ajax/mibbit.com/x-d291642e860a061c) has joined #beagle
  • [02:37:33] * mib_ge87g2 (i=ca85eba4@gateway/web/ajax/mibbit.com/x-d291642e860a061c) Quit (Client Quit)
  • [02:48:20] * favor (n=user@221.10.25.6) has joined #beagle
  • [02:52:07] <favor> hi. all. I has been using the uImage from OE to start beagleboard normally, today, I replace with uImage from TI OMAP35x_SDK_1.0.2, but It hangs at "starting kernel...". anybody can give me some help?
  • [02:59:21] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) Quit ("Leaving.")
  • [03:02:52] <muriani> go back to the one from OE?
  • [03:03:45] * Olipro (n=Olipro@uncyclopedia/pdpc.active.olipro) Quit (Nick collision from services.)
  • [03:03:56] * Olipro (n=Olipro@uncyclopedia/pdpc.active.olipro) has joined #beagle
  • [03:03:57] <denix0> favor: that's for EVM, isn't it?
  • [03:07:28] * mib_uxanal (i=cb7afa89@gateway/web/ajax/mibbit.com/x-8a39c0432850865f) has joined #beagle
  • [03:07:28] * mib_uxanal (i=cb7afa89@gateway/web/ajax/mibbit.com/x-8a39c0432850865f) Quit (Client Quit)
  • [03:12:01] <favor> denix0: yup.
  • [03:12:42] <favor> can't we use the kernel from EVM?
  • [03:21:04] <favor> someone think EVM is more or less the same as beagleboard, I do think so. I think the both of kernel can be used by each other, do they?
  • [03:29:08] <favor> however, I doubt it sometimes. I am not sure that. 'cause the evm has its own keyboard and its special driver
  • [03:29:51] <favor> their hw design is a little difference with each other.
  • [03:48:48] * mib_t9u41i (i=d91e4006@gateway/web/ajax/mibbit.com/x-44ec40bc4099faa5) has joined #beagle
  • [03:54:39] * gregoiregentil (n=gregoire@adsl-71-135-100-40.dsl.pltn13.pacbell.net) has joined #beagle
  • [03:59:24] <djlewis> cool, I am streaming shoutcast fm with mplayer on BB
  • [04:00:19] <djlewis> BB's finally doing something useful ;(
  • [04:12:42] <Animule> heh
  • [04:13:58] <ds2> djlewis: what networking?
  • [04:20:18] <djlewis> hi ds2: Yep no go with streaming my webcam yet so I diverged.. ;)
  • [04:23:42] <djlewis> at least it makes a mean stereo player.
  • [04:24:31] <djlewis> ya get a audio POP! between each when playing song files locally
  • [04:25:05] <djlewis> But fm stream plays without pops as the source is steady.
  • [04:25:53] <djlewis> Tried to lay mp3's off windows share, while they show in
  • [04:26:11] <djlewis> player list, they wont play. Copied to local BB storage and ok.
  • [04:26:52] <djlewis> mplayer is fine with Shoutcast but not xmms yet.
  • [04:28:20] * rsalveti (n=rsalveti@189.70.40.205) has joined #beagle
  • [04:36:14] <Animule> http://www.youtube.com/watch?v=xHw5T4_JmmM
  • [04:39:43] * niral (i=3b5ff562@gateway/web/ajax/mibbit.com/x-a6eb6d9cbdd47e75) has joined #beagle
  • [04:41:12] <ds2> djlewis: but what kind of networking? wifi? ethernet? usb?
  • [04:41:22] <djlewis> oh. wifi
  • [04:42:12] <ds2> hmmm
  • [04:42:42] <djlewis> upstairs is a Linksys wrt54g on my DSL modem.
  • [04:43:29] <djlewis> I am currently using a USB wifi pulled for a HP mini desktop
  • [04:44:00] <djlewis> With it when BB boots the wifi just works.
  • [04:44:23] <djlewis> With my Linksys WUSB54g I have to plug it in about time
  • [04:44:36] <djlewis> the bluetooth start shows on console.
  • [04:45:05] <djlewis> Or I wait and unplug/plug wusb54g after boot
  • [04:45:10] <djlewis> or it wont work.
  • [04:49:16] * sakoman_ (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) has joined #beagle
  • [04:49:42] <djlewis> hello sakoman_
  • [04:51:12] <ds2> hmmm the 54g I think is a rt73 which shouldwork with w/warm plugging
  • [04:51:52] * sakoman (n=sakoman@static-74-41-60-154.dsl1.pco.ca.frontiernet.net) Quit (Read error: 60 (Operation timed out))
  • [04:51:55] <djlewis> if the 54g startup was later it would work normally.
  • [04:53:19] * MostAwesomeDude is now known as MAD|hunger
  • [04:53:53] <ds2> howwodd
  • [04:54:16] <djlewis> ?
  • [04:56:32] * jsync (n=jess@user-0c9h865.cable.mindspring.com) has joined #beagle
  • [04:56:37] <Animule> "It won't stop squirting!!"
  • [04:56:39] <Animule> http://www.youtube.com/watch?v=ihbsJIuznPU
  • [04:57:23] <ds2> 'how odd'
  • [04:59:25] <djlewis> yep.
  • [05:02:41] * mib_zp6j03 (i=3b5ff562@gateway/web/ajax/mibbit.com/x-808d3ed31d656719) has joined #beagle
  • [05:04:03] <mib_zp6j03> how to change resolutaion from vga to higher on beagle board?
  • [05:08:03] <ds2> recompile or use a compile line override if you are second the new driver
  • [05:08:25] * MAD|hunger is now known as MostAwesomeDude
  • [05:08:41] <ds2> s/compile/command/
  • [05:08:43] * Abraxas3d (n=michelle@cpe-24-94-7-251.san.res.rr.com) Quit (Remote closed the connection)
  • [05:08:46] <ds2> kernel command line, that is
  • [05:09:20] <mib_zp6j03> hi ds2 is it for me?
  • [05:11:01] <mib_zp6j03> I am using 2.6.29.1 release and I using direct defconfig given in the arm config ....it is by default giving me vga resolution
  • [05:12:37] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
  • [05:15:53] <djlewis> ds2: with each new build I try I still have to edit, copy, paste to have static IP
  • [05:17:56] * KosiNuss (n=tom@R2cd3.r.pppool.de) has joined #beagle
  • [05:19:01] <djlewis> mib_zp6j03: boot env, set omapfb.video_mode=1280x1024MR-16@60 to your resolution
  • [05:20:44] <djlewis> mib_zp6j03: nope, the arg has changed to: omapfb.mode=1024x768MR-16@60
  • [05:24:34] <mib_zp6j03> in bootargs??
  • [05:24:42] <djlewis> yes
  • [05:25:11] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) has joined #beagle
  • [05:25:48] <mib_zp6j03> i will try that now ...
  • [05:26:17] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) has joined #beagle
  • [05:26:21] <djlewis> I use a sakoman_ image so I "nand erase 260000 20000"
  • [05:26:27] * rsalveti (n=rsalveti@189.70.40.205) Quit ("Leaving")
  • [05:27:03] <djlewis> then I setenv dvimode = 1280x1024MR-16A60 for my Dell DVI
  • [05:27:41] <djlewis> thats " setenv dvimode = 1280x1024MR-16@60"
  • [05:28:16] <djlewis> oops, it is a Samsung SyncMaster 731B monitor.
  • [05:28:31] <djlewis> I have several
  • [05:28:54] <mib_zp6j03> nope its not changing ...
  • [05:29:13] <mib_zp6j03> actuall when kernel is compiling it is again setting it to vgs
  • [05:29:14] <djlewis> did you save env
  • [05:29:17] <mib_zp6j03> vga
  • [05:29:22] <mib_zp6j03> yes i did
  • [05:29:32] <djlewis> are you using a DVI monitor?
  • [05:29:57] * robclark_ (n=robclark@nat/ti/x-835f96e7ff3a9036) Quit ()
  • [05:30:18] <mib_zp6j03> bootargs=console=ttyS2,115200n8 console=tty0 root=/dev/ram0 rw ramdisk_size=32767 initrd=0x81600000,32M nohz=off omapfb.mode=1024x768MR-16@60
  • [05:30:25] <mib_zp6j03> this is my args
  • [05:30:49] <mib_zp6j03> m able to display vga videos using dvi cable on LG monitor
  • [05:31:09] * rsalveti (n=rsalveti@189.70.40.205) has joined #beagle
  • [05:31:45] * KosiNuss (n=tom@R2cd3.r.pppool.de) Quit (Remote closed the connection)
  • [05:32:05] <djlewis> which build are you using
  • [05:32:41] <mib_zp6j03> i have built my my own kernel ....from 2.6.29.1 kernel code
  • [05:33:11] <djlewis> hmm... I don't build em, I download em.
  • [05:34:21] <mib_zp6j03> so some where kernel is also playing part and i have to change in that also
  • [05:35:46] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) Quit ("leaving")
  • [05:35:57] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) has joined #beagle
  • [05:36:07] <djlewis> mine was simple. I too had default vga until I erased nand like I mentioned above
  • [05:36:29] <djlewis> I went from 2.6.28 r17 to 2.6.29xx
  • [05:37:51] <djlewis> Linux beagle 2.6.29-omap1 #1 Fri May 8 12:10:53 PDT 2009 armv7l GNU/Linux
  • [05:39:01] <mib_zp6j03> hmm .... while uncompressing kernel its saying "omapfb omapfb: cannot parse default modes"
  • [05:39:09] <djlewis> the 2.6.28 nand setup wont work quite right with 2.6.29
  • [05:39:21] * BThompsonD (n=bernie@cpe-66-25-52-232.tx.res.rr.com) Quit ("Leaving.")
  • [05:39:53] <mib_zp6j03> so what to change?
  • [05:39:59] * rupeshgujare (n=rupesh@59.160.172.220) has joined #beagle
  • [05:40:31] <djlewis> does your kernel use DSS2
  • [05:41:56] <ds2> default 2.6.29-omap1 is not DSS2
  • [05:42:02] <mib_zp6j03> i think yes its saying "OMAP DSS rev 2.0"
  • [05:42:06] <ds2> so you will need to modify the source
  • [05:43:21] <mib_zp6j03> correct me if i m wrong..
  • [05:44:18] <djlewis> sakoman_'s image I use has DSS2 in it.
  • [05:45:06] <djlewis> Therefore it was simple as "nand erase 260000 20000" for me
  • [05:46:38] <djlewis> then " setenv dvimode = 1024x768MR-16@60"
  • [05:47:25] <djlewis> I dont know how your personal kernel build differs.
  • [05:47:36] <mib_zp6j03> hmm
  • [05:47:55] <djlewis> I followed his recommendations.
  • [05:47:59] <mib_zp6j03> i will also try to set dvimode environment varbile?
  • [05:48:04] <djlewis> sakoman's that is
  • [05:48:20] <djlewis> ds2: has more BB experience than me.
  • [05:49:27] <djlewis> What does your dvimode default to at boot? before kernel?
  • [05:50:34] <djlewis> the bootargs line you listed is from the earlier 2.6.28 uboot.
  • [05:51:32] <mib_zp6j03> it is before boot it is 1280*720 58 hz
  • [05:51:51] <djlewis> yet it boots to vga?
  • [05:52:15] <mib_zp6j03> yes and after kernel uncompression it is vga
  • [05:52:25] <mib_zp6j03> i think kernel is setting it to vga
  • [05:52:54] <djlewis> I cant help then. ds2 might get you back on the kernel track.
  • [05:52:57] <mib_zp6j03> i am using 1.3.3 u boot version
  • [05:54:55] <mib_zp6j03> any ways thanks ....one small query ..where did u got that uimage from ?
  • [05:55:37] <mib_zp6j03> so that i can also take that uimage and see wether with that u image i am able to boot higher than vga ..
  • [05:55:41] <djlewis> http://www.sakoman.com/feeds/omap3/glibc/images/beagleboard/200904242040/
  • [05:56:15] <djlewis> http://www.sakoman.com/feeds/omap3/glibc/images/beagleboard/
  • [05:56:22] <djlewis> ignore the first one.
  • [05:56:56] <djlewis> i am using his 05082009
  • [05:57:28] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [05:57:55] <mib_zp6j03> u boot also i need to change?
  • [05:59:21] <djlewis> he posts the uboot, MLO, uImage and get the omap3-desktop-image.
  • [06:00:43] <mib_zp6j03> what is omap3-desktop-image??i am using MLO , uimage and uboot??so do i need to copy omap3-desktop-image also to mmc card?
  • [06:01:07] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) Quit ()
  • [06:06:54] * rsalveti (n=rsalveti@189.70.40.205) Quit (Remote closed the connection)
  • [06:07:09] <mib_zp6j03> djlewis:with that uboot.bin uimage and MLO
  • [06:07:10] * rsalveti (n=rsalveti@189.70.40.205) has joined #beagle
  • [06:07:23] <mib_zp6j03> it is 640*480 61hz
  • [06:08:29] <djlewis> are you still usingdefault nand env?
  • [06:08:38] <mib_zp6j03> yes
  • [06:08:39] <djlewis> I had to let my dog out.
  • [06:08:50] <mib_zp6j03> k
  • [06:09:17] <mib_zp6j03> can u quickly give me that env settings?
  • [06:09:22] <djlewis> I used the files I liistd and had to erase the nand like I said for his image to work properly
  • [06:09:22] <mib_zp6j03> pls..
  • [06:09:26] <djlewis> with video.
  • [06:11:06] <mib_zp6j03> any ways thank you for your help....i will digg more in this ...
  • [06:11:17] * booxter (n=booxter@80.249.91.57) Quit ("leaving")
  • [06:11:35] <djlewis> http://pastebin.com/d489c46d9 before and after env
  • [06:13:20] <mib_zp6j03> thx very much
  • [06:13:23] <mib_zp6j03> good day
  • [06:13:26] * BeagleB (i=8bb5d022@gateway/web/ajax/mibbit.com/x-33789afcd3086d5a) has joined #beagle
  • [06:14:02] <djlewis> the new env creates itself after the nand erase and power cycle.
  • [06:14:59] <djlewis> the default video came up as listed in the after nand erase env.
  • [06:15:18] <mib_zp6j03> ok
  • [06:15:36] <djlewis> Why are you building your own kernel? are you into developing software?
  • [06:15:45] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) has joined #beagle
  • [06:16:04] * erbo (n=erik@c-9076e455.174-501-64736c14.cust.bredbandsbolaget.se) has joined #beagle
  • [06:17:07] <mib_zp6j03> yes
  • [06:18:41] <djlewis> I hope to only build small apps. I too may have to build my own later.
  • [06:19:16] <mib_zp6j03> hmm ...
  • [06:19:35] <djlewis> I can build most of what I have in mind on the Beagle.
  • [06:21:34] <djlewis> time for bed, I hope you get yours working ...
  • [06:21:41] <mib_zp6j03> yes ...but actually i am new to all this so its taking little time for me
  • [06:22:05] <BeagleB> can anyone tell me the how to calculate MHz of Clock for BeagleBoard
  • [06:22:21] <mib_zp6j03> and talking to people like you and mru and all i can gear up
  • [06:22:30] * niral (i=3b5ff562@gateway/web/ajax/mibbit.com/x-a6eb6d9cbdd47e75) Quit ("http://www.mibbit.com ajax IRC Client")
  • [06:22:36] <mib_zp6j03> thx for your help....good night sweet dream
  • [06:23:05] * djlewis says nite all.
  • [06:24:37] <BeagleB> can anyone tell me the how to calculate MHz of Clock for BeagleBoard
  • [06:28:27] * BeagleB (i=8bb5d022@gateway/web/ajax/mibbit.com/x-33789afcd3086d5a) Quit ("http://www.mibbit.com ajax IRC Client")
  • [06:31:38] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) has joined #beagle
  • [06:35:15] * mib_11f79m (i=de42e996@gateway/web/ajax/mibbit.com/x-c01e907509d667b0) has joined #beagle
  • [06:35:33] <mib_11f79m> hi all
  • [06:35:36] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [06:36:05] <mib_11f79m> any guys successfully port android to the beagle board???
  • [06:36:15] <khasim> rupeshgujare: ping
  • [06:36:48] <khasim> mib_11f79m: yeah, check with rupeshgujare
  • [06:36:54] <mib_11f79m> the ehci USB seems not work
  • [06:37:18] <mib_11f79m> hi rupeshgujare
  • [06:40:38] <mib_11f79m> it seems the USB has not been configured when compile the kernel
  • [06:41:20] <mib_11f79m> could somebody help me about the android for beagle board
  • [06:42:27] * tsjsieb (n=tsjsieb@dejongbeheer.nl) has joined #beagle
  • [06:44:11] <rupeshgujare> hi
  • [06:44:18] <rupeshgujare> khasim:yes
  • [06:44:29] * woxz (i=d2ca1087@gateway/web/ajax/mibbit.com/x-bb3de082ffa3278a) has joined #beagle
  • [06:44:33] <khasim> rupeshgujare: you can call me now,
  • [06:44:52] <rupeshgujare> khasim:ok
  • [06:44:53] <khasim> rupeshgujare:second, some help needed for mib_11f79m on USB Host
  • [06:45:14] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) Quit ("Leaving.")
  • [06:45:14] <mib_11f79m> hi
  • [06:45:32] <rupeshgujare> mib_11f79m: hi mib_11f79m
  • [06:45:59] <mib_11f79m> I have try to run android on beagleboard follow http://labs.embinux.org/index.php/Main_Page
  • [06:46:03] * djlewis (n=bubba@216-61-218-74.dsl.tcworks.net) Quit (Read error: 110 (Connection timed out))
  • [06:46:04] <rupeshgujare> mib_11f79m what are you trying
  • [06:46:09] <rupeshgujare> with USB ?
  • [06:46:25] <rupeshgujare> I mean what is not working about USB ?
  • [06:46:50] <mib_11f79m> usb disk plug to the board
  • [06:47:25] <mib_11f79m> it cannot detect usb disk when I insert USB disk
  • [06:48:10] <rupeshgujare> mib_11f79m: we havent tested to connect usb disk
  • [06:48:30] <mib_11f79m> what kind of device you have test?
  • [06:49:02] <rupeshgujare> mib_11f79m: we tested with USB keyboard.
  • [06:49:14] <rupeshgujare> it is working fine for us.
  • [06:49:16] <mib_11f79m> for android??
  • [06:49:20] <rupeshgujare> yes
  • [06:49:30] <mib_11f79m> ok
  • [06:50:01] <mib_11f79m> I want make it work for usb disk, and what should I do?
  • [06:50:38] <mib_11f79m> I have tried to rebuid kernel code, however failed.
  • [06:50:58] <rupeshgujare> probably you need to enable right kernel config for it
  • [06:51:05] <rupeshgujare> where it failed ?
  • [06:51:53] <mib_11f79m> it can not find usb fs when system boot up.
  • [06:52:34] <rupeshgujare> did you checked if it is enabled in kernel config ?
  • [06:53:08] <mib_11f79m> yes
  • [06:55:26] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 110 (Connection timed out))
  • [06:56:03] <mib_11f79m> hi rupeshgujare
  • [06:56:08] <mib_11f79m> another questions
  • [06:56:30] * leslie__ (n=leslie@116.228.58.74) Quit (Remote closed the connection)
  • [06:57:05] <mib_11f79m> when I boot up android use the origen code, the android main menu can not be find.
  • [06:57:08] <rupeshgujare> mib_11f79m:yes
  • [06:58:44] <mib_11f79m> graphic seems not work
  • [07:01:04] <rupeshgujare> mib_11f79m: whats problem with graphics ?
  • [07:01:29] <rupeshgujare> mib_11f79m: can you send error log ?
  • [07:03:22] <mib_11f79m> I can send the pictures to u.
  • [07:03:46] <mib_11f79m> http://up.widget.mibbit.com/up/fW2wE8po.jpg
  • [07:04:45] <mib_11f79m> http://up.widget.mibbit.com/up/5CbSgGX5.jpg
  • [07:05:05] * booxter (n=booxter@cpmsq.epam.com) has joined #beagle
  • [07:05:53] <rupeshgujare> mib_11f79m: it looks like your display is detected properly
  • [07:06:23] <rupeshgujare> so nothing comes up after android logo ?
  • [07:06:36] <rupeshgujare> is it the problem ?
  • [07:06:40] <mib_11f79m> yeah
  • [07:07:01] <mib_11f79m> i wanna it dispaly other information
  • [07:07:40] <rupeshgujare> all right did you changed permission ? http://labs.embinux.org/index.php/Android_Porting_Guide_to_Beagle_Board#Ownership_.26_Permissions
  • [07:09:03] <mib_11f79m> yeah
  • [07:09:22] <mib_11f79m> I have changed it following the guid
  • [07:10:56] <rupeshgujare> mib_11f79m: oki just to verify make sure that u have following patch applied to /init.rc
  • [07:10:58] <rupeshgujare> http://labs.embinux.org/git/cgit.cgi/repo/android/platform/system/core.git/commit/?id=d992e26879cd434d3ad9f2bc3747e486a2fd9cbf
  • [07:11:33] <AV500> khasim: who do I send a bug report for the V4L2 driver too?
  • [07:12:17] <rupeshgujare> mib_11f79m: looking at android logo on screen, i can tell you that you are using old binaries. recently these had been updated, you can give a try to newer one as well
  • [07:12:53] <mib_11f79m> ok thanks
  • [07:13:09] <mib_11f79m> i will try that
  • [07:14:40] <rupeshgujare> mib_11f79m: send me o/p of $logcat, if it is still not working for u.
  • [07:16:42] * Psychiatras (i=1000@212.122.84.232) has joined #beagle
  • [07:24:22] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up .....Up and Awayyyyyyyy... Atom Atom Ant....")
  • [07:25:03] <mib_11f79m> Fetching projects: 2% (3/113) fatal: The remote end hung up unexpectedly
  • [07:25:40] <mib_11f79m> this error happens when I type command "repo sync"
  • [07:28:18] <rupeshgujare> mib_11f79m: let me cjeck out
  • [07:29:38] * montamer1 (n=montamer@203.199.213.184) has joined #beagle
  • [07:30:37] <mib_11f79m> what does "cjeck out" mean?
  • [07:30:45] * montamer (n=montamer@203.199.213.3) Quit (Read error: 104 (Connection reset by peer))
  • [07:30:47] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) has joined #beagle
  • [07:30:49] <rupeshgujare> r u behind firewall ?
  • [07:31:04] <rupeshgujare> it is working fine for me.
  • [07:31:22] <rupeshgujare> Getting manifest ...
  • [07:31:22] <rupeshgujare> from git://labs.embinux.org/repo/android/platform/beaglemanifest.git/
  • [07:31:22] <rupeshgujare> warning: no common commits
  • [07:31:22] <rupeshgujare> remote: Counting objects: 18, done.
  • [07:31:22] <rupeshgujare> remote: Compressing objects: 100% (12/12), done.
  • [07:31:23] <rupeshgujare> remote: Total 18 (delta 5), reused 0 (delta 0)
  • [07:31:25] <rupeshgujare> Unpacking objects: 100% (18/18), done.
  • [07:31:27] <rupeshgujare> From git://labs.embinux.org/repo/android/platform/beaglemanifest
  • [07:31:29] <rupeshgujare> * [new branch] master -> origin/master
  • [07:31:31] <rupeshgujare> Your Name [Rupesh Gujare]:
  • [07:31:33] <rupeshgujare> Your Email [rupesh.gujare@embinux.com]:
  • [07:31:35] <rupeshgujare> repo initialized in /data/test/test-dev
  • [07:31:37] <rupeshgujare> rupesh@rupesh-desktop:/data/test/test-dev$ repo sync
  • [07:31:39] <rupeshgujare> Initializing project platform/bionic ...
  • [07:31:41] <rupeshgujare> warning: no common commits
  • [07:31:43] <rupeshgujare> remote: Counting objects: 2451, done.
  • [07:31:45] <rupeshgujare> remote: Compressing objects: 100% (1043/1043), done.
  • [07:31:47] <rupeshgujare> remote: Total 2451 (delta 1476), reused 2295 (delta 1371)
  • [07:31:49] <rupeshgujare> Receiving objects: 100% (2451/2451), 1.63 MiB | 85 KiB/s, done.
  • [07:31:51] <rupeshgujare> Resolving deltas: 100% (1476/1476), done.
  • [07:31:53] <rupeshgujare> From git://android.git.kernel.org/platform/bionic
  • [07:31:55] <rupeshgujare>
  • [07:31:57] <rupeshgujare> ohh sorry everyone :)
  • [07:32:17] * montamer (n=montamer@203.199.213.3) has joined #beagle
  • [07:32:40] <mib_11f79m> ok thanks, I will check that
  • [07:32:58] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) has joined #beagle
  • [07:34:26] * ceyusa (n=ceyusa@155.99.117.91.static.mundo-r.com) has joined #beagle
  • [07:46:03] * lool- is now known as lool
  • [07:47:04] <rupeshgujare> mib_11f79m: please feel free to send all issues/concerns to labs-embinux@googlegroups.com You can subscribe to it by sending mail to labs-embinux-subscribe@googlegroups.com
  • [07:48:33] * montamer2 (n=montamer@203.199.213.184) has joined #beagle
  • [07:48:33] * mw (n=mwalter@212.42.238.29) has joined #beagle
  • [07:48:53] * montamer1 (n=montamer@203.199.213.184) Quit (Read error: 113 (No route to host))
  • [07:50:56] * jsync (n=jess@user-0c9h865.cable.mindspring.com) has left #beagle
  • [07:52:39] * montamer (n=montamer@203.199.213.3) Quit (Read error: 60 (Operation timed out))
  • [07:55:17] <mib_11f79m> ok
  • [07:59:03] * mw (n=mwalter@212.42.238.29) has left #beagle
  • [07:59:53] * abitos (n=nixgibts@dslb-084-057-193-137.pools.arcor-ip.net) has joined #beagle
  • [08:04:00] <mib_11f79m> hi rupeshgujare
  • [08:04:45] <mib_11f79m> which version of Android code you have started base on?
  • [08:16:21] * mpoullet|work (n=mpoullet@proxye.avm.de) has joined #beagle
  • [08:16:32] <mpoullet|work> good morning
  • [08:21:07] <geckosenator> has anyone sent their beagle in for RMA?
  • [08:21:16] <geckosenator> I think I need to for mine, but I'm not sure if they refund or not?
  • [08:23:41] <booxter> geckosenator: they should refund it. But guarantee is only a month if I haven't missed smth
  • [08:24:18] <booxter> geckosenator: check beagle reference manual, there is the info on refunding
  • [08:26:45] <booxter> geckosenator: page #3 in SRM
  • [08:42:49] * mib_g3wyyd (i=561adef9@gateway/web/ajax/mibbit.com/x-daf149d4b65d9965) has joined #beagle
  • [08:43:42] <mib_g3wyyd> 1
  • [08:43:54] * mib_g3wyyd (i=561adef9@gateway/web/ajax/mibbit.com/x-daf149d4b65d9965) Quit (Client Quit)
  • [08:45:07] * zumbi (n=zumbi@77.225.184.78) has joined #beagle
  • [08:45:15] <zumbi> hi
  • [08:45:45] <zumbi> do you know which is the erase block size for NAND on the beagleboard?
  • [08:59:24] <zumbi> 128KB
  • [08:59:31] <zumbi> listed under /proc/mtd
  • [08:59:44] <mru> that's what the datasheet says too
  • [09:03:21] <zumbi> mru: which datasheet? omap3?
  • [09:03:38] <AV500> zumbi: the ds of the flash chip
  • [09:04:09] <zumbi> AV500: i thought flash was embedded in the OMAP
  • [09:04:22] <AV500> nope, just soldered on top
  • [09:05:32] <mib_zp6j03> hi i have compiled the 2.6.29 kernel n by default i am getting vga resolution on LCD.i am able to run vga videos using DVI port.how can i change this resolution to higher?
  • [09:06:53] <zumbi> mib_zp6j03: i have omapfb.video_mode=1024x768MR-16@60 on the kernel command line
  • [09:07:03] * florian_kc (n=fuchs@port-217-146-132-69.static.qsc.de) has joined #beagle
  • [09:07:28] <zumbi> i set that up on the uboot variables (bootargs?)
  • [09:07:40] <rupeshgujare> mib_zp6j03: http://android.git.kernel.org/?p=kernel/omap.git;a=blob;f=drivers/video/modedb.c;h=16186240c5f22ba47b63971847ba6e2384515d27;hb=refs/heads/android-omap-2.6.29
  • [09:07:50] <mib_zp6j03> same i have used but not working ...
  • [09:08:36] * florian_kc is now known as florian
  • [09:08:45] <mib_zp6j03> actually while kernel is getting uncompressed its changing to vga
  • [09:08:58] <mib_zp6j03> otherwise before it is 1024 * 768
  • [09:09:21] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) Quit ("Leaving.")
  • [09:09:56] <zumbi> mib_zp6j03: i think i have same issue here.. kernel just does not like that option
  • [09:10:06] <zumbi> Unknown boot option `omapfb.video_mode=1024x768MR-16@60': ignoring
  • [09:13:14] <rupeshgujare> zumbi: r u sure that ur kernel have DSS2 patches and it is enabled in the kernel ?
  • [09:13:55] <mib_zp6j03> i think i am having DSS2 as in my defconfig that macro is enable
  • [09:14:59] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
  • [09:17:01] <zumbi> rupeshgujare: i am not sure about that, i used rcn-ee patches over gitorious omap tree. /me greps config
  • [09:17:52] <zumbi> rupeshgujare: CONFIG_OMAP2_DSS=y ?
  • [09:18:23] <rupeshgujare> zumbi: yes thats right
  • [09:18:52] <rupeshgujare> one more config is required to be enabled
  • [09:19:00] <rupeshgujare> just a min. i ll check it out
  • [09:19:11] <mib_zp6j03> k
  • [09:19:57] <rupeshgujare> CONFIG_FB_OMAP2
  • [09:20:17] <zumbi> CONFIG_FB_OMAP2=y
  • [09:21:05] <rupeshgujare> OMAP2_DSS_VRAM_SIZE [=12]
  • [09:21:16] <zumbi> CONFIG_OMAP2_DSS_VRAM_SIZE=14
  • [09:21:46] <rupeshgujare> enable FB_OMAP2_DEBUG_SUPPORT [=y]
  • [09:21:51] <rupeshgujare> might help to debug
  • [09:22:19] <zumbi> changing VRAM_SIZE might made any difference?
  • [09:22:27] <geckosenator> booxter: ok
  • [09:22:42] <geckosenator> booxter: I want to order another one right away so I don't have to wait for a refund
  • [09:23:28] * mib_bn9dap (i=d59f6bd6@gateway/web/ajax/mibbit.com/x-8430790c7569f125) has joined #beagle
  • [09:23:59] <mib_zp6j03> hi I have all other but CONFIG_OMAP2_DSS_VRAM_SIZE=14 is not ther?
  • [09:24:07] <rupeshgujare> zumbi:check following config file, i can very well boot with this
  • [09:24:10] <rupeshgujare> http://labs.embinux.org/images/6/60/Omap3_beagle_android_defconfig.txt
  • [09:24:37] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [09:25:10] <rupeshgujare> mib_zp6j03: which kernel r u using ?
  • [09:25:32] <mib_11f79m> hi rupeshgujare
  • [09:26:05] <rupeshgujare> mib_11f79m: yes
  • [09:26:07] <mib_11f79m> should I need patch for android if I have run command "repo sync"?
  • [09:26:26] <mib_zp6j03> i am using 2.6.29.1
  • [09:26:31] <mib_zp6j03> kernel..
  • [09:27:47] <rupeshgujare> mib_11f79m: u dont need any patch to run $repo sync
  • [09:27:56] <zumbi> ogra: ayt?
  • [09:28:15] <rupeshgujare> mib_zp6j03: from where u downloaded it ?
  • [09:28:19] <ogra> zumbi, ?
  • [09:28:42] <zumbi> ogra: i used your arm-rootfs script successfully :-)
  • [09:28:56] <ogra> good to hear ! :)
  • [09:29:07] <zumbi> ogra: i was just wondering how to get a sheel on the serial port, i do not see any inittab
  • [09:29:16] <mib_11f79m> If the latest patch can be find in the development mainline? git://labs.embinux.org/repo/android/platform/beaglemanifest.git/
  • [09:29:29] <zumbi> s/sheel/shell
  • [09:29:43] <ogra> zumbi, ubuntu uses upstart, no inittab with upstart ... it uses /etc/event.d/
  • [09:30:27] <mib_zp6j03> rupeshgujare:dont exactly recollecting
  • [09:30:47] <mib_zp6j03> but may be from kernel.org ...i m using it from 2 weeks i guess
  • [09:30:49] <rupeshgujare> mib_11f79m: yes.. its updated recently
  • [09:30:54] <zumbi> ogra: ok, thanks, i'll try to read about it
  • [09:31:13] <mib_zp6j03> and added few patches
  • [09:31:27] <ogra> there should be various howtos on the net
  • [09:31:50] <zumbi> google upstart serial howto
  • [09:32:16] * digger3 (n=tmarkus@82-171-150-207.ip.telfort.nl) has left #beagle
  • [09:32:18] <ogra> http://www.debuntu.org/how-to-set-up-a-serial-console-on-ubuntu look at section 2.1
  • [09:32:29] <rupeshgujare> mib_zp6j03: k.. i will recommend to work with kernel tree, which is working fine for DSS2
  • [09:32:57] <mib_zp6j03> sorry but from where?
  • [09:34:03] <zumbi> http://gitorious.org/linux-omap-dss2 ?
  • [09:34:07] * CruNcher (n=luls_lol@dslb-084-058-185-202.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [09:34:20] <rupeshgujare> http://www.bat.org/~tomba/git/linux-omap-dss.git
  • [09:34:34] * CruNcher (n=luls_lol@dslb-084-058-120-063.pools.arcor-ip.net) has joined #beagle
  • [09:35:12] <rupeshgujare> mib_zp6j03: above is from DSS2 developers.
  • [09:36:31] <mib_zp6j03> rupeshgujare:and the other patches i can put in to this
  • [09:36:32] <mib_zp6j03> ?
  • [09:38:00] <rupeshgujare> mib_zp6j03: which patches ? r u working with android ?
  • [09:38:50] <mib_zp6j03> no
  • [09:40:02] <rupeshgujare> mib_zp6j03: it is upto u, what all patches u want to add on it.
  • [09:41:07] <mib_zp6j03> ok
  • [09:41:42] <mib_zp6j03> http://www.bat.org/~tomba/git/linux-omap-dss.git/ is it kernel code?
  • [09:41:58] <AV500> very much
  • [09:42:06] <rupeshgujare> mib_zp6j03: yes, along with DSS2 patches
  • [09:42:42] <zumbi> ogra: it did work, thanks, one last thing would be how to disable activating swap message. I can not see any line in the fstab.
  • [09:43:34] <ogra> its an initscript
  • [09:44:29] <ogra> i dont think it actually does anything if there is no swap definaed in fstab, it just shows the message
  • [09:45:31] <zumbi> ok - well, thanks, another thing i am missing is mtd-utils, but i know how to solve it :)
  • [09:47:44] * mib_9vemob (i=4f7fa041@gateway/web/ajax/mibbit.com/x-2282a2ac56e5f1c7) has joined #beagle
  • [09:48:41] * mib_9vemob (i=4f7fa041@gateway/web/ajax/mibbit.com/x-2282a2ac56e5f1c7) Quit (Client Quit)
  • [09:51:36] * KosiNuss (n=tom@R2cd3.r.pppool.de) has joined #beagle
  • [09:58:55] * Qball is now known as Eightball
  • [09:59:02] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [09:59:27] * Eightball is now known as Qball
  • [10:10:50] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
  • [10:12:36] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) Quit ()
  • [10:14:13] * Wiedi (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [10:14:58] * hrw|gone is now known as hrw
  • [10:22:45] * meek (n=meek@p5B07664C.dip.t-dialin.net) has joined #beagle
  • [10:30:09] * XorA|gone is now known as XorA
  • [10:31:01] * woxz (i=d2ca1087@gateway/web/ajax/mibbit.com/x-bb3de082ffa3278a) Quit ("http://www.mibbit.com ajax IRC Client")
  • [10:37:30] * zedstar (n=john@fsf/member/zedstar) Quit ("Leaving")
  • [10:39:01] * ogra (n=ogra@ubuntu/member/ogra) Quit ("Verlassend")
  • [10:40:04] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-4716c1b3470508ce) has joined #beagle
  • [10:41:23] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-4716c1b3470508ce) Quit (SendQ exceeded)
  • [10:42:03] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-5197810267ceb07c) has joined #beagle
  • [10:45:59] <mib_zp6j03> hi
  • [10:48:07] <geckosenator> hi
  • [10:48:14] * greyback (n=greyback@dhcp-892b7b54.ucd.ie) has joined #beagle
  • [10:50:41] <hrw> morning
  • [10:51:18] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-5197810267ceb07c) Quit (Read error: 60 (Operation timed out))
  • [10:52:18] <mib_zp6j03> i have vga resolution and all its showing xres= 640 and yres = 480 ....how do i change it to large resolution ....command line bootargs are not working ...
  • [10:52:38] <mib_zp6j03> tried different kernel images also...
  • [10:53:08] * cradek_ (n=chris@rrcs-76-79-58-171.west.biz.rr.com) has joined #beagle
  • [10:53:08] * cradek (n=chris@emc/board-of-directors/cradek) Quit (Read error: 104 (Connection reset by peer))
  • [10:53:51] * magnet__ (n=magnet@AMontpellier-151-1-29-149.w92-143.abo.wanadoo.fr) Quit (Read error: 113 (No route to host))
  • [10:53:56] * magnet (n=magnet@AMontpellier-151-1-29-149.w92-143.abo.wanadoo.fr) has joined #beagle
  • [10:54:07] * magnet_ (n=magnet@AMontpellier-151-1-29-149.w92-143.abo.wanadoo.fr) Quit (Read error: 113 (No route to host))
  • [10:55:30] <mib_zp6j03> i am using 2.6.29.1 kernel....
  • [10:55:45] <mib_zp6j03> any idea how to change xres and yres in which files?
  • [10:57:15] * elesueur (n=elesueur@vampire.ertos.nicta.com.au) Quit (Read error: 113 (No route to host))
  • [11:03:19] * favor (n=user@221.10.25.6) Quit (Read error: 110 (Connection timed out))
  • [11:06:23] * mib_3v750f (i=4ebd1c30@gateway/web/ajax/mibbit.com/x-bb3121274488bdaf) has joined #beagle
  • [11:12:08] * elesueur (n=elesueur@120.16.244.207) has joined #beagle
  • [11:13:27] * jeremychang (n=jeremych@61-30-10-70.static.tfn.net.tw) Quit ("??????")
  • [11:26:38] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) has joined #beagle
  • [11:28:37] * tor2|away is now known as tor2
  • [11:29:39] * dev001 (i=3b5ff562@gateway/web/ajax/mibbit.com/x-5fe68721acc352e3) has joined #beagle
  • [11:33:01] * dev001 (i=3b5ff562@gateway/web/ajax/mibbit.com/x-5fe68721acc352e3) Quit (Client Quit)
  • [11:40:18] * eFfeM (n=nly91006@195-241-226-180.ip.telfort.nl) Quit ("Leaving.")
  • [11:40:23] <Crofton|work> koen, my beagle does not boot with the ppoll patch
  • [11:41:22] <Crofton|work> 17ed48f1a44001d05614a03c0fc469346516f5a1 from May 23 does work though
  • [11:46:19] * geckosenator (n=sean@c-71-237-94-78.hsd1.co.comcast.net) Quit (Read error: 60 (Operation timed out))
  • [11:47:51] * rsalveti (n=rsalveti@189.70.40.205) Quit (Remote closed the connection)
  • [11:52:05] <mib_3v750f> hi
  • [11:53:00] <mib_3v750f> does BB support any wireless stick
  • [11:53:45] <mib_3v750f> example could i use USRXX5422 wireless stick with BB
  • [11:53:48] <hrw> mib_3v750f: if linux do then it does
  • [11:54:11] <mib_3v750f> yes now i m running angstrom in BB
  • [11:55:43] <mib_3v750f> i tried put isl3887 /lib/firmware but i dont have much experience about linux
  • [11:56:14] <mib_3v750f> isl3887_bare to /lib/firm...
  • [11:56:59] * wiedi_ (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [11:57:49] * Wiedi (n=wiedi@newton-air.w.fruky.net) Quit (Connection reset by peer)
  • [11:58:29] <koen> Crofton|work: I think you need to patch linux-libc-headers and rebuild glibc/gcc for it to work
  • [12:00:00] * booxter (n=booxter@cpmsq.epam.com) Quit ("leaving")
  • [12:00:00] <Crofton|work> I did a clean build of .dev
  • [12:00:14] <Crofton|work> no time to fool with it atm
  • [12:00:32] <Crofton|work> I working against the build that works :)
  • [12:03:50] <hrw> koen: did you tried xserver 1.6.x?
  • [12:04:32] * __alanc__ (n=a-campbe@nat/ti/x-4c4803d520e7ed54) has joined #beagle
  • [12:05:07] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [12:05:22] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [12:08:15] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [12:12:28] <topi_> uh oh, my usbhost port just died. tried attaching a usbhub there, and got
  • [12:12:37] <topi_> hub 1-2:1.0: USB hub found
  • [12:12:37] <topi_> hub 1-2:1.0: 4 ports detected
  • [12:12:37] <topi_> usb 1-2: USB disconnect, address 3
  • [12:12:37] <topi_> hub 1-0:1.0: unable to enumerate USB device on port 2
  • [12:12:52] <topi_> this 1-0 might come from the usb ethernet adapter which is connected to the usb hub
  • [12:13:33] <hrw> topi_: power attached?
  • [12:13:43] <topi_> and, the usb ethernet works just fine when it's connected directly to the beagle board usbhost connector
  • [12:13:47] * jeremychang (n=jeremych@61.57.131.211) has joined #beagle
  • [12:13:51] <topi_> yes, I have 5V power on the usb hub
  • [12:15:02] <topi_> maybe i'll try a reboot
  • [12:15:57] <hrw> you have revC?
  • [12:16:13] <topi_> yes, no usbhost port on the B
  • [12:16:40] <topi_> i have the system powered from the usbotg port
  • [12:17:23] <topi_> funny, now the hub seems to work ok. 4 ports detected
  • [12:17:59] <topi_> grr. plugged in a USB 8GB stick and got USB disconnect
  • [12:18:23] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [12:19:00] <topi_> and after doing this, no usb devices work any longer so this must be a kernel bug or the inability of resetting the ehci controller
  • [12:19:17] * mib_e9yqtr (i=5640c7e4@gateway/web/ajax/mibbit.com/x-bc0d517eb9e3e178) has joined #beagle
  • [12:19:38] * mib_e9yqtr (i=5640c7e4@gateway/web/ajax/mibbit.com/x-bc0d517eb9e3e178) Quit (Client Quit)
  • [12:19:46] * mib_3v750f (i=4ebd1c30@gateway/web/ajax/mibbit.com/x-bb3121274488bdaf) Quit ("http://www.mibbit.com ajax IRC Client")
  • [12:20:35] <topi_> this is with koen's newest kernel
  • [12:20:58] <topi_> newest that was avaialble for download, i mean
  • [12:23:22] * rsalveti_ (n=rsalveti@200.184.118.136) has joined #beagle
  • [12:23:51] <topi_> it seems that the usb hub works OK when it's connected at kernel boot time. if I connect it afterwards, bad things happen. any ideas?
  • [12:25:30] * as_leep is now known as ali_as
  • [12:25:36] <ali_as> This is angstrom?
  • [12:25:43] <topi_> yes
  • [12:25:54] <topi_> it's not about distribution, it's all about the kernel
  • [12:26:10] <topi_> i'm just investigating what kind of messages i get in the dmesg
  • [12:26:44] <ali_as> Might be helpful to say what make/model of hub/memory stick it is.
  • [12:27:44] <topi_> some kingston 8GB stick, then another 1GB stick, and then a DUB D-100 ethernet adapter
  • [12:27:47] <hrw> ali_as: not quite useful
  • [12:28:05] <topi_> none of them work if I insert the usb hub after boot, but everything works if the hub is connected at boot time
  • [12:28:06] <hrw> ali_as: my BT adapter has gazillion of names
  • [12:29:00] <topi_> i guess i'm satisfied with the fact that the hub works as long as it is connected at boot time
  • [12:29:56] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-a26d21a8376d8ed8) has joined #beagle
  • [12:30:18] <recalcati> morning
  • [12:31:32] * rsalveti (n=rsalveti@200.184.118.130) Quit (Read error: 113 (No route to host))
  • [12:32:41] <ali_as> hrw, well a name can often be chased to a chipset.
  • [12:33:20] * CruNcher (n=luls_lol@dslb-084-058-120-063.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [12:33:45] <hrw> ali_as: gm8050 (or sth like that) chipset is found in most of cheap usbhubs. but some of them works better then others
  • [12:33:52] * ScriptRipper (n=martin@opensuse/member/MartinMohring) Quit (Remote closed the connection)
  • [12:34:48] * elesueur (n=elesueur@120.16.244.207) Quit (Read error: 110 (Connection timed out))
  • [12:34:52] * CruNcher (n=luls_lol@dslb-084-058-182-081.pools.arcor-ip.net) has joined #beagle
  • [12:36:52] <ali_as> hrw, if you worked at a hospital would you turn people away because most people are not ill?
  • [12:38:17] <hrw> ali_as: I just know how badly can look world of accessories from dev/user point of view.
  • [12:38:39] <hrw> ali_as: I passed long fight with compactflash cards first (wifi, net, etc ones)
  • [12:39:40] <rupeshgujare> DJWillis:ping
  • [12:40:05] <rupeshgujare> DJWillis: ping
  • [12:43:28] * CruNcher (n=luls_lol@dslb-084-058-182-081.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [12:44:26] * CruNcher (n=luls_lol@dslb-084-058-184-117.pools.arcor-ip.net) has joined #beagle
  • [12:46:19] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-d38673fe78d54a29) has joined #beagle
  • [12:50:12] <ali_as> Ubuntu developer summit!
  • [12:53:40] * rsalveti_ (n=rsalveti@200.184.118.136) Quit (Remote closed the connection)
  • [12:54:47] * ScriptRipper (n=martin@host-82-135-36-197.customer.m-online.net) has joined #beagle
  • [12:55:31] * rsalveti (n=rsalveti@200.184.118.136) has joined #beagle
  • [12:56:25] * alecrim (n=alecrim@189.2.128.130) has joined #beagle
  • [12:56:25] * CruNcher (n=luls_lol@dslb-084-058-184-117.pools.arcor-ip.net) Quit (Read error: 54 (Connection reset by peer))
  • [12:58:08] * rsalveti (n=rsalveti@200.184.118.136) Quit (Read error: 104 (Connection reset by peer))
  • [12:58:39] * maxired (i=86d6eef2@gateway/web/ajax/mibbit.com/x-753f71df1c767cea) has joined #beagle
  • [12:59:33] <maxired> morning'
  • [13:00:13] <maxired> does anybody know where to find a pre-compiled IcedTea/openjdk package for the BeagleBoard ?
  • [13:03:34] * CruNcher (n=luls_lol@dslb-084-058-116-213.pools.arcor-ip.net) has joined #beagle
  • [13:04:10] <Crofton> does anyone have a small stand alone dsplink based example for using the dsp?
  • [13:05:45] <AV500> what about the TI examples?
  • [13:06:40] * maxired (i=86d6eef2@gateway/web/ajax/mibbit.com/x-753f71df1c767cea) Quit ("http://www.mibbit.com ajax IRC Client")
  • [13:08:01] * rsalveti (n=rsalveti@200.184.118.136) has joined #beagle
  • [13:08:56] * KosiNuss (n=tom@R2cd3.r.pppool.de) Quit (Remote closed the connection)
  • [13:11:41] <Crofton> they are lumped in to the dsplink build system
  • [13:12:08] <Crofton> I want something that I can easily gets my arms around :)
  • [13:12:14] * rsalveti (n=rsalveti@200.184.118.136) Quit (Remote closed the connection)
  • [13:12:19] <Crofton> without having to extract it from thte gsplink build :)
  • [13:12:23] * Beagle1 (n=Beagle1@dslb-088-076-032-237.pools.arcor-ip.net) has joined #beagle
  • [13:13:05] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-d38673fe78d54a29) Quit ("Verlassend")
  • [13:13:24] * Guest37253 (n=ogra@conference/ubuntu-developer-summit/x-36687d0d84a834f2) has joined #beagle
  • [13:13:42] <Beagle1> hi - i'm struggling with the angstrom demo at the moment :(
  • [13:13:51] <Crofton> in what way
  • [13:13:54] * Guest37253 is now known as ogra
  • [13:13:59] <koen> Crofton: better ask on #gst_ti, more dsplink people there
  • [13:14:05] <Beagle1> if i try using the newest kernel i get error -110 when trying to mount the fs
  • [13:14:11] <Crofton> koen, thanks
  • [13:14:32] <Beagle1> with the .27 kernel i can mount the fs, but i get lots of I/O errors transferring data to mmc
  • [13:14:56] <Crofton> Beagle1, during boot?
  • [13:15:00] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [13:15:05] <Crofton> those errors are realted to flash
  • [13:15:08] <Beagle1> yes exactly
  • [13:15:12] <Crofton> and are "normal"
  • [13:15:48] <Beagle1> but i never get to the angstrom login... or do i have to wait 5 minuts while errors keep popping up?
  • [13:16:06] <Beagle1> i get errors like: lost page write due to I/O error on mmcblk0p2
  • [13:16:18] <Beagle1> Buffer I/O error on device mmcblk0p2, logical block 262144
  • [13:16:20] <Beagle1> and so on
  • [13:16:24] * rob_k (i=5a9c5284@gateway/web/ajax/mibbit.com/x-8123e47a3311e7d2) has joined #beagle
  • [13:16:33] <Crofton> ah
  • [13:16:40] <Crofton> that is actuall mmc error
  • [13:16:44] <Crofton> try another card?
  • [13:16:50] <Crofton> what kind of card is it?
  • [13:17:45] <Beagle1> its a mmcPlus
  • [13:17:49] <__alanc__> crofton - we're working on "hello dsp" kind of example u discussed above i.e. standalone gpp-dsp minimal link app...will try & get ETA
  • [13:17:59] <Crofton> thanks
  • [13:18:19] <Crofton> It would be really handy to have this week :)
  • [13:18:28] <Beagle1> it worked using a ramdisk image from the rescue files as well as it's finding the kernel uImage which is also located on the mmc
  • [13:18:39] <AV500> Crofton: no easy way to build standalone?
  • [13:19:01] <Crofton> not without me spending time de-constructing the build system
  • [13:19:07] <Crofton> stuff is scattered all over
  • [13:19:17] <AV500> even for the examples?
  • [13:19:20] <Crofton> yep
  • [13:19:24] <AV500> damn
  • [13:19:26] <Crofton> I took a look the other day
  • [13:19:41] <Crofton> tracking down all the vars will take time
  • [13:20:06] <Crofton> if I could spend all my time on it, I could do it, but juggling several things
  • [13:20:27] <Crofton> I have to do a half day tutorial on some stuff next week
  • [13:20:33] <AV500> yes, but as you just compile a user land app, isnt it enough to compile against the headers and link with the lib?
  • [13:20:40] <Crofton> and I have lots of stuff to review :)
  • [13:20:45] <Beagle1> so does the beagleboard support mmc+?
  • [13:21:01] <Crofton> AV500, basically, it is a time thing
  • [13:21:21] <Crofton> I could do it, but then I do not get more important stuff done :(
  • [13:21:40] <Crofton> but, I would like to do an introduction as part of the tuorial
  • [13:21:44] * Crofton goes insane
  • [13:21:47] <XorA> Beagle1: mmc+ is so damn rare I think you answered your own question
  • [13:22:00] * AV500 looks into dsplink examples
  • [13:22:58] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
  • [13:23:52] <Beagle1> hmmm ok... i'll try to get another card... i assume a sdhc card wouldn't work as well? got one lying around right next to me ;)
  • [13:24:07] <XorA> Beagle1: sdhc should work
  • [13:24:08] <ali_as> They mostly work.
  • [13:24:08] * bunty (i=3b5fe444@gateway/web/ajax/mibbit.com/x-15741d6a1b93e98d) has joined #beagle
  • [13:25:03] * cbrake_away is now known as cbrake
  • [13:25:43] <bunty> hi
  • [13:26:13] <bunty> which profiler is working for beagle
  • [13:26:55] * _Lucretia_ (n=Lucretia@5ac2a25a.bb.sky.com) has joined #beagle
  • [13:27:18] * rsalveti (n=rsalveti@200.184.118.130) Quit (Remote closed the connection)
  • [13:27:48] <Beagle1> ok - thanks for the hints... i'm off trying another card :-p
  • [13:27:53] * AV500 understands Croftons pain
  • [13:28:15] * geckosenator (n=sean@71.237.94.78) has joined #beagle
  • [13:28:44] * mrc3 (n=ddiaz@189.157.113.43) has joined #beagle
  • [13:29:07] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  • [13:30:48] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-a26d21a8376d8ed8) Quit ("http://www.mibbit.com ajax IRC Client")
  • [13:34:01] <mib_zp6j03> any one knows any patch for changing resolution from vga to higher?
  • [13:34:33] <zumbi> mib_zp6j03: i dunno, but maybe changing some uboot envvar
  • [13:34:58] <geckosenator> ds2: ping
  • [13:35:05] <geckosenator> mib_zp6j03: ?
  • [13:35:25] <geckosenator> kernel parameter or echo stuff to sysfs when running
  • [13:36:00] * recalcati (i=51485a51@gateway/web/ajax/mibbit.com/x-cde06ac90a4d2cb3) has joined #beagle
  • [13:36:08] <mib_zp6j03> i tried chgning env varaibles ..but not working...
  • [13:36:15] <geckosenator> aw
  • [13:36:56] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [13:37:06] <mib_zp6j03> how can i check resolution of the bb?
  • [13:38:23] <geckosenator> fbset
  • [13:38:30] * rsalveti (n=rsalveti@200.184.118.130) has joined #beagle
  • [13:38:32] * Beagle1 (n=Beagle1@dslb-088-076-032-237.pools.arcor-ip.net) Quit (Read error: 104 (Connection reset by peer))
  • [13:38:32] <geckosenator> is a program you can run
  • [13:38:55] <mib_zp6j03> open /dev/fb0: No such file or directory
  • [13:39:01] <mib_zp6j03> it is saying
  • [13:40:02] * mib_rgfezs (i=82e28ef3@gateway/web/ajax/mibbit.com/x-5cfe9cd6bb6c8c4f) has joined #beagle
  • [13:40:26] <geckosenator> ok
  • [13:40:27] * mib_rgfezs (i=82e28ef3@gateway/web/ajax/mibbit.com/x-5cfe9cd6bb6c8c4f) Quit (Client Quit)
  • [13:40:29] * ddompe (n=ddompe@200.122.155.113) has joined #beagle
  • [13:40:30] <geckosenator> well did you compile the kernel?
  • [13:40:38] <mib_zp6j03> yes
  • [13:41:45] * JahJah (i=5545bf82@gateway/web/ajax/mibbit.com/x-bf429bf34e108fb5) has joined #beagle
  • [13:41:55] * robclark (n=robclark@nat/ti/x-bb1dbd0bb35f0ce5) has joined #beagle
  • [13:42:01] <geckosenator> haha!
  • [13:42:08] <geckosenator> sorry it's early
  • [13:42:14] <JahJah> Hello, can I boot the beagle on a USB key?
  • [13:42:18] <geckosenator> mib_zp6j03: did you enable omap framebuffer suport?
  • [13:43:21] <JahJah> I have broke the SD reader .... so OMAP could boot on USB?
  • [13:43:38] * meek (n=meek@p5B07664C.dip.t-dialin.net) Quit (Read error: 60 (Operation timed out))
  • [13:43:54] <JahJah> And i'm sorry for my bad english, I'm french
  • [13:44:43] <geckosenator> how did you break it?
  • [13:44:44] * bunty (i=3b5fe444@gateway/web/ajax/mibbit.com/x-15741d6a1b93e98d) Quit ("http://www.mibbit.com ajax IRC Client")
  • [13:44:53] <geckosenator> someone fat sat on it?
  • [13:45:57] <JahJah> with welding RS232 connector
  • [13:46:02] <XorA> JahJah: if kernel is in flash, then usb disk can be used as rootfs
  • [13:46:25] <mib_zp6j03> geckosenator:i got it...mode is "640x480-59"
  • [13:46:26] <JahJah> But i need to load it before...
  • [13:47:05] <mib_zp6j03> is it possible to change mode ....after booting?
  • [13:47:22] <geckosenator> yes
  • [13:47:41] <geckosenator> XorA: what if kernel is in nand?
  • [13:47:47] <XorA> geckosenator: yes
  • [13:47:54] <geckosenator> cool
  • [13:48:02] <XorA> root=/dev/sda?
  • [13:48:13] <XorA> as long as usb-storage is built in
  • [13:48:21] <geckosenator> well
  • [13:48:25] <geckosenator> or if you have an initial ramdisk
  • [13:48:31] <geckosenator> which contains the modules for usb-storage
  • [13:48:34] <XorA> yeah
  • [13:48:54] <JahJah> Someone could explain me how boot debian without using SD/MMC
  • [13:49:04] <geckosenator> I would like to do a wifi boot
  • [13:49:07] <geckosenator> is that supported?
  • [13:49:13] <geckosenator> over usb wifi
  • [13:49:22] <mib_zp6j03> geckosenator:is it possible to change mode ....after booting?
  • [13:49:31] <mib_zp6j03> video mode?
  • [13:49:34] <geckosenator> yes
  • [13:49:37] <JahJah> I would like do that too gecko :)
  • [13:49:40] <XorA> geckosenator: I think thats something technically possible but no-one has done it yet :-)
  • [13:49:46] <geckosenator> heh
  • [13:49:57] <geckosenator> or bluetooth boot
  • [13:50:09] <geckosenator> over ppp which is over virtual bluetooth serial port
  • [13:50:14] <XorA> anything you can run nfs over can technically be booted
  • [13:50:20] <JahJah> ok... so I need to put my initial ramdisk in nand.... to boot on usb
  • [13:50:22] <geckosenator> that too then
  • [13:50:31] <JahJah> but how put something on it without SD/MMC
  • [13:50:37] <mib_zp6j03> geckosenator:how can we change video mode after booting?
  • [13:50:48] <geckosenator> mib_zp6j03: echo stuff in /sys
  • [13:50:58] <geckosenator> JahJah: that's my issue
  • [13:51:12] <geckosenator> JahJah: since my sd card doesn't work either, not sure why
  • [13:51:25] <JahJah> Me i'm sure why
  • [13:51:32] <geckosenator> I thinik you need jtag debugger?
  • [13:51:33] <JahJah> ;)
  • [13:51:37] <geckosenator> you welded it?
  • [13:51:40] <geckosenator> I'm confused
  • [13:51:51] <JahJah> JTAG?
  • [13:51:54] * mib_11f79m (i=de42e996@gateway/web/ajax/mibbit.com/x-c01e907509d667b0) Quit ("http://www.mibbit.com ajax IRC Client")
  • [13:52:12] <JahJah> i'm using serial connection with my labtop
  • [13:52:25] <JahJah> to boot on my SD before...
  • [13:52:34] <mib_zp6j03> echo stuff in /sys ....didnt got it ...
  • [13:53:24] <JahJah> I wan't to using the beagle as a brain in a robot with debian (or angstrom, but i need to make a ssh connection under Wifi to compile C)
  • [13:53:34] <geckosenator> I have that working
  • [13:53:38] <geckosenator> on my revB
  • [13:53:44] * Leon_Nardella1 (n=leon@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  • [13:53:44] <geckosenator> and it worked on revC until it broke
  • [13:53:46] <JahJah> with debian?
  • [13:53:49] <geckosenator> yes
  • [13:53:53] <JahJah> good :)
  • [13:53:56] <geckosenator> and wifi
  • [13:53:58] <JahJah> I need that
  • [13:53:58] <geckosenator> and bluetooth
  • [13:54:03] <geckosenator> for a keyboard
  • [13:54:05] <JahJah> uhm
  • [13:54:16] <geckosenator> also external harddrive
  • [13:54:21] <geckosenator> but webcam didn't work
  • [13:54:27] <JahJah> and do you lauch worg between ssh?
  • [13:54:40] <JahJah> I need webcam
  • [13:54:47] <JahJah> for scan picture with balls
  • [13:54:57] <JahJah> my robot will follow it!
  • [13:55:24] <JahJah> xorg not worg... i'm sorry
  • [13:55:32] <mib_zp6j03> geckosenator:sorry to intruppt u but can u pls let me know what u exactly mean by echo stuff in /sys....how it will help to change
  • [13:55:54] <mib_zp6j03> video mode higher than vga?
  • [13:56:49] <geckosenator> mib_zp6j03: sorry you better read teh documentation on it
  • [13:56:56] * meek (n=meek@p5B075026.dip.t-dialin.net) has joined #beagle
  • [13:57:19] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
  • [13:57:22] <mib_zp6j03> ya no problem u have any link for that?
  • [13:57:36] * cbrake is now known as cbrake_away
  • [13:57:41] <geckosenator> your running dss2?
  • [13:57:59] <mib_zp6j03> yes
  • [13:58:28] <mib_zp6j03> my kernel is prinit while booting OMAP DSS rev 2.0
  • [13:59:23] <geckosenator> well
  • [13:59:32] <geckosenator> look at the dss2 docs
  • [14:00:20] <JahJah> gecko, do you have a
  • [14:00:44] <JahJah> ssh connexion with gnome lauch?
  • [14:00:48] <JahJah> under your beagle
  • [14:01:49] * montamer2 (n=montamer@203.199.213.184) Quit (Read error: 104 (Connection reset by peer))
  • [14:02:37] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 60 (Operation timed out))
  • [14:03:45] <geckosenator> yes
  • [14:03:53] <geckosenator> I can run firefox
  • [14:03:58] <geckosenator> it works pretty well
  • [14:04:29] <JahJah> I would like have the same :)
  • [14:04:44] <geckosenator> well
  • [14:04:48] <geckosenator> let me get you started
  • [14:04:56] <geckosenator> wait, you need working sd card
  • [14:04:58] <geckosenator> heh
  • [14:05:09] <JahJah> I have already install Debian under Qemu
  • [14:05:11] <geckosenator> then: http://elinux.org/BeagleBoardDebian
  • [14:05:17] <geckosenator> I didn't use qemu
  • [14:05:36] <geckosenator> I did a wifi net install on beagle
  • [14:05:36] <JahJah> I have antoher beagle... but It need to reload good boot sequence
  • [14:05:41] <JahJah> OMAP is dead XD
  • [14:05:57] <geckosenator> I have another beagle too
  • [14:06:03] <geckosenator> but it's only 128m ram version
  • [14:06:08] <geckosenator> so isn't as good
  • [14:06:23] * mib_yj7vck (i=d96d23c1@gateway/web/ajax/mibbit.com/x-965f62a6af380ca4) has joined #beagle
  • [14:06:35] <JahJah> And I will have an another ... I hope... a new, without welding of antoher people!
  • [14:06:46] <JahJah> Mines are revision B
  • [14:06:48] * montamer (n=montamer@203.199.213.184) has joined #beagle
  • [14:06:55] <JahJah> so I believe it's 128 too
  • [14:07:02] <JahJah> uhm
  • [14:07:12] <geckosenator> I'm ordering another one today since I fried my revC last week
  • [14:07:12] <JahJah> so i have Install debian under Qemu
  • [14:07:15] <geckosenator> no
  • [14:07:22] <geckosenator> not if you install on the beagle
  • [14:07:25] * mib_yj7vck (i=d96d23c1@gateway/web/ajax/mibbit.com/x-965f62a6af380ca4) Quit (Client Quit)
  • [14:07:29] <JahJah> ok...
  • [14:07:41] <JahJah> So directly boot on init from debian on sd
  • [14:07:48] <geckosenator> yes
  • [14:07:52] <geckosenator> boot the debian installer on sd
  • [14:07:53] <JahJah> How long this install during?
  • [14:07:58] <JahJah> ok
  • [14:08:06] <geckosenator> your question makes no sense
  • [14:08:34] <JahJah> I'm sorry... I'll try again ;)
  • [14:08:58] <JahJah> How long this kind of installation take ?
  • [14:09:32] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) Quit (Connection timed out)
  • [14:10:35] <geckosenator> not long
  • [14:10:37] <JahJah> Under Qemu it's during 5hours ...
  • [14:10:42] <geckosenator> but I ended up with a minmal system
  • [14:10:47] <geckosenator> oh, it took like 30 minutes maybe
  • [14:10:57] <JahJah> to install gnome and all other apps
  • [14:10:59] <geckosenator> but then I installed a lot of software after
  • [14:11:04] <geckosenator> that doesn't take long
  • [14:11:05] <JahJah> ok
  • [14:11:10] <geckosenator> depends on internet connection
  • [14:11:15] <JahJah> okok
  • [14:11:17] <JahJah> thx :)
  • [14:11:18] <geckosenator> it wasn't much slower than a normal debian install
  • [14:11:44] <JahJah> Ok! because with Qemu it's much slower!
  • [14:11:46] <geckosenator> yes
  • [14:11:49] <geckosenator> I used qemu too
  • [14:12:02] <geckosenator> it's probably 10x slower
  • [14:12:12] <JahJah> Yep ....
  • [14:12:31] <JahJah> So I have not really touch the beagle
  • [14:12:36] <JahJah> to make your installation
  • [14:12:36] * cradek_ is now known as cradek
  • [14:12:56] <JahJah> I need to connect my USB Hub... with my wifi
  • [14:13:01] <JahJah> key
  • [14:13:17] * suihkulokki (i=nchip@naru.obs2.net) Quit (Remote closed the connection)
  • [14:13:24] <JahJah> put my sd prepare before
  • [14:13:29] <JahJah> and boot my debian
  • [14:13:48] <geckosenator> I made mine connect to bluetooth keybaord with press of the user key
  • [14:13:54] <JahJah> and follow the wiki
  • [14:14:03] <geckosenator> I updated stuff on the wiki about wifi
  • [14:14:13] <geckosenator> since it didn't work at first
  • [14:14:27] * Vincent2 (i=c05b3c0a@gateway/web/ajax/mibbit.com/x-ac39fdd1ae82d347) has joined #beagle
  • [14:14:31] <Vincent2> Hi all
  • [14:14:50] * KosiNuss (n=tom@R2cd3.r.pppool.de) has joined #beagle
  • [14:15:01] <JahJah> Thx :)
  • [14:15:05] <Vincent2> Does anyone knows how to reduce the loglevel of the console ? I tried "echo 1 > /proc/sys/kernel/printk" , but I still get every messages
  • [14:15:12] <JahJah> I hope I'll not have this trouble
  • [14:16:11] <JahJah> loglevel?
  • [14:16:32] <Vincent2> to avoid some printk to be printed in the console
  • [14:17:12] <topi_> can anyone tell me what I need to do to get video out to my DVI monitor? I can see the Beagle splash screen when uboot starts booting, but then when the angstrom distribution loads up, the screen goes black and I can't make anything to the screen even with dd of=/dev/fb0
  • [14:17:21] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) Quit ()
  • [14:17:32] <topi_> even Xorg seems to be up and running, using the fb
  • [14:23:12] * suihkulokki (i=nchip@naru.obs2.net) has joined #beagle
  • [14:23:19] * eFfeM (n=Frans@195-241-226-180.ip.telfort.nl) has joined #beagle
  • [14:24:33] * JahJah (i=5545bf82@gateway/web/ajax/mibbit.com/x-bf429bf34e108fb5) Quit ("http://www.mibbit.com ajax IRC Client")
  • [14:24:46] * JahJah (i=5545bf82@gateway/web/ajax/mibbit.com/x-6cf92ed03ba7bc6d) has joined #beagle
  • [14:24:57] <JahJah> Geckosenator, wan we have pm?
  • [14:25:19] <JahJah> can*
  • [14:25:26] * mib_og46h3 (i=7aa60de8@gateway/web/ajax/mibbit.com/x-3a10260a6481a9ad) has joined #beagle
  • [14:26:06] <mib_og46h3> is there any sysfs entry to see the mux settings?
  • [14:26:12] * tsjsieb (n=tsjsieb@dejongbeheer.nl) Quit ("good night")
  • [14:27:05] * mib_zp6j03 (i=3b5ff562@gateway/web/ajax/mibbit.com/x-808d3ed31d656719) Quit ("http://www.mibbit.com ajax IRC Client")
  • [14:27:24] * pfoetchen (n=pfoetche@dslb-092-075-115-084.pools.arcor-ip.net) has joined #beagle
  • [14:30:23] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [14:34:35] * robclark (n=robclark@nat/ti/x-bb1dbd0bb35f0ce5) Quit (Remote closed the connection)
  • [14:40:58] <geckosenator> hi
  • [14:43:04] <topi_> ok, i think I know why DVI doesn't work for me.
  • [14:43:05] <topi_> omap-dss DISPC error: dispc irq error status 4000
  • [14:43:05] <topi_> omap-dss DISPC error: Excessive DISPC errors
  • [14:43:05] <topi_> Turning off lcd and digit
  • [14:43:19] <topi_> anyone else getting these dispc irq errors?
  • [14:43:46] <tomba> topi_: hi =)
  • [14:44:01] * robclark (n=robclark@nat/ti/x-28686ca4d41327a9) has joined #beagle
  • [14:44:16] <topi_> tomba, do you have "dss" on highlight? :)
  • [14:44:21] <tomba> yep =)
  • [14:44:25] <topi_> haha
  • [14:44:36] <tomba> in what scenario does that happen? boot time, or do you do something?
  • [14:44:47] <topi_> so, i suppose as long as I get "turning off lcd ", I won't get anything on the DVI then?
  • [14:44:56] <tomba> yes
  • [14:45:06] <JahJah> Hi again geckosenator
  • [14:45:12] <topi_> it happens in the boot
  • [14:45:20] <topi_> VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1
  • [14:45:20] <topi_> registered taskstats version 1
  • [14:45:20] <topi_> Console: switching to colour frame buffer device 80x30
  • [14:45:20] <topi_> clock: clksel_round_rate_div: dpll4_m4_ck target_rate 48000000
  • [14:45:20] <topi_> clock: new_div = 9, new_rate = 48000000
  • [14:45:23] <topi_> omap-dss DISPC error: dispc irq error status 4024
  • [14:45:40] <tomba> my first guess is that you have a bit older DSS2, and your bootloader initializes DSS (ie. shows a picture)
  • [14:45:52] <topi_> is this 48MHz clock for DSS somehow? I think it's a PER clock.
  • [14:46:12] <topi_> yes, the uboot shows the dog on screen.
  • [14:46:47] <JahJah> geckosenator can we have pm?
  • [14:46:49] <tomba> update your DSS driver, or install u-boot that doesn't show the screen
  • [14:47:32] <tomba> that clock is base clock from which dss fck is generated
  • [14:48:29] <topi_> topi@uni:/$ uname -a
  • [14:48:29] <topi_> Linux uni 2.6.28-omap1 #1 Tue Mar 24 18:57:27 CET 2009 armv7l GNU/Linux
  • [14:48:40] <topi_> this is a kernel compiled by koen, but evidently it's two months old
  • [14:49:55] * magnet_ (n=magnet@AMontpellier-151-1-28-189.w92-143.abo.wanadoo.fr) has joined #beagle
  • [14:50:56] <koen> tomba: how critical is the irq fix you made last week?
  • [14:51:29] <koen> topi_: you could give the http://www.angstrom-distribution.org/demo/beagleboard/ 2.6.29 kernel a spin
  • [14:51:41] <topi_> ok, lets test it
  • [14:52:30] <tomba> koen: well, depends what you do. for normal use, it's not critical. but without it OMAPFB_WAITFORVSYNC doesn't work properly.
  • [14:52:43] <tor2> I was reading back there in the log.. Beagle1 seems to have logged off, but for the record, isn't it true that you can' t boot from MMC+ because they're all 1.8V cards, and those won't work until after boot. (That's why I went ahead and bought an SD card for this, even though I've got an MMC+ lying around)
  • [14:52:47] <topi_> i bicycled 8km to get a bloody hdmi->dvi converter and now I get only a bloody dog, nothing else!
  • [14:52:50] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) has joined #beagle
  • [14:52:54] <tomba> so it is needed for double buffering, for example
  • [14:53:11] <koen> tomba: ok, I'll add the patches to the 2.6.29 patchset :)
  • [14:53:26] <tomba> topi_: get u-boot from official git, compile and flash. it doesn't have the bloody dog =)
  • [14:53:52] <topi_> I haven't yet dared to flash the bootloader. I'm pretty new to this beagle board anyways
  • [14:54:01] <topi_> so i don't want to brick it ;)
  • [14:54:30] <tomba> you cannot brick it totally =)
  • [14:54:34] * KosiNuss (n=tom@R2cd3.r.pppool.de) Quit (Remote closed the connection)
  • [14:54:58] <tomba> the bootrom can always be used to get it up. it'll just be more difficult.
  • [14:54:58] <topi_> I know, I know, but i'm under a strict time schedule here...
  • [14:55:27] <topi_> have you been able to send the X-Loader and U-boot through the UART in a cold flashing scenario?
  • [14:55:32] <tomba> wait... you resigned, and now you're under strict time schedule? ;)
  • [14:56:08] <tomba> topi_: I haven't done it, but it should be possible. I've just used Trace32 to load the stuff into memory
  • [14:56:14] <topi_> I'm going sailing, but first I need to set up a server (thats why I bought the Beagle) that will serve my web pages
  • [14:56:36] <topi_> good for you! I don't have a JTAG debugger on hand.
  • [14:56:36] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [14:56:47] * myhrman (n=miranda@h-159-76.A155.priv.bahnhof.se) has joined #beagle
  • [14:58:02] <adj> beagle also boots happily from MMC/SD even with empty NAND, so no need for JTAG
  • [14:58:22] <adj> it's always a good excercise to erase the whole flash right in the beginning :)
  • [14:58:33] * hrw is now known as hrw|gone
  • [14:58:57] <topi_> adj: true, maybe I should do that
  • [14:59:03] <tomba> ah, that is true. you don't even need cold flashing
  • [14:59:45] <zumbi> has anyone tried moblin on the beagel?
  • [15:00:18] <koen> tomba: any plans to squash some patches together for dss2?
  • [15:01:40] <tomba> koen: yes, after I finish one bigger change. then I plan to send it to fbdev-devel again.
  • [15:01:50] <koen> great!
  • [15:02:01] <koen> I have 70 dss2 patches now :)
  • [15:02:03] <tomba> I don't want to squash often, as that'll make it more difficult to sync with our production kernel tree.
  • [15:02:22] <tomba> I have 90!
  • [15:02:26] <koen> :)
  • [15:02:49] <koen> my current workflow to add new patches to the kernel isn't annoying me yet
  • [15:03:03] <koen> but some people freak out at seeing many, many patches
  • [15:03:11] <koen> (I could just cat them all together...)
  • [15:04:08] * Septalicia (n=bakljg@98.240.226.129) has joined #beagle
  • [15:04:42] * magnet (n=magnet@AMontpellier-151-1-29-149.w92-143.abo.wanadoo.fr) Quit (Read error: 110 (Connection timed out))
  • [15:04:55] * JahJah (i=5545bf82@gateway/web/ajax/mibbit.com/x-6cf92ed03ba7bc6d) Quit ("http://www.mibbit.com ajax IRC Client")
  • [15:08:40] <Crofton> mru, ping
  • [15:11:12] * Crofton|bold (n=Crofton|@32.134.199.208) has joined #beagle
  • [15:13:14] <koen> Crofton: where's Crofton|beautiful hinding?
  • [15:13:40] <Crofton|bold> heh
  • [15:13:40] * ogra (n=ogra@ubuntu/member/ogra) Quit (Operation timed out)
  • [15:14:57] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) Quit ("Verlassend")
  • [15:18:06] <topi_> koen: I get some horizontal lines, so maybe the DVI sync is just wrong.
  • [15:18:38] <topi_> ok, there are even more interesting effects :D there might be something wrong about the sync values.
  • [15:18:48] <topi_> Linux beagleboard 2.6.29-omap1 #1 Mon May 25 12:47:52 CEST 2009 armv7l unknown
  • [15:19:52] <topi_> [ 202.753509] omapfb omapfb: Unknown ioctl 0x5401
  • [15:19:56] * emeb (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
  • [15:20:08] <topi_> it seems the angstrom fbset command doesn't really work well with the dss driver.
  • [15:21:05] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [15:21:06] * pH5 (n=ph5@e178212134.adsl.alicedsl.de) has joined #beagle
  • [15:21:47] <topi_> my monitor claims that the screen mode is 640x494
  • [15:22:21] <koen> you can change it in uboot
  • [15:22:29] <topi_> how?
  • [15:22:37] <topi_> (is there a FAQ about these somewhere?()
  • [15:22:45] <koen> omapfb.mode=dvi:640x480MR-16@60
  • [15:22:56] <topi_> lets see
  • [15:23:22] <koen> I use omapfb.mode=dvi:800x540MR-16@60 since this screen doesn't like the 1600x1080 timings
  • [15:25:32] * ogra (n=ogra@ubuntu/member/ogra) has joined #beagle
  • [15:25:33] <topi_> this mode makes my monitor behave funnily
  • [15:25:47] * BThompsonD (n=bernie@cpe-66-25-52-232.tx.res.rr.com) has joined #beagle
  • [15:26:00] <koen> you can try feeding it another resolution
  • [15:26:15] <koen> and you could try leaving out the 'MR'
  • [15:27:05] <topi_> what's the MR anyway?
  • [15:27:22] <koen> reduced timings
  • [15:27:34] * Leon_Nardella1 is now known as Leon_Nardella
  • [15:27:43] <koen> the beagle can only do a 87MHz pixclock, so you have to use reduced timings to get a decent refresh rate
  • [15:28:21] <topi_> :(
  • [15:29:49] <topi_> ok, now it works when I leave the MR part off!
  • [15:30:19] <topi_> I have a vintage 19" ViewSonic from 2005
  • [15:30:50] <tomba> R is for reduced timings. M is for... using some standard timings, I think.
  • [15:31:42] * favor (n=favor@118.113.37.178) has joined #beagle
  • [15:32:08] <tomba> the most important reason to use reduced timings is that OMAP ES2 and earlier have quite narrow video timing registers, and only reduced timings are possible.
  • [15:32:52] <koen> tomba: is the es3 patch in your repo already?
  • [15:33:22] <tomba> I think so
  • [15:33:24] <topi_> tomba: my rev.C2 beagle seems to have OMAP3 ES3.0
  • [15:34:24] * fischer (n=tfischer@fischerfamily.org) Quit (Read error: 110 (Connection timed out))
  • [15:35:40] * davidcb (n=david@m505e36d0.tmodns.net) Quit (Read error: 110 (Connection timed out))
  • [15:35:57] * favor (n=favor@118.113.37.178) Quit ("Leaving")
  • [15:42:41] * koen tries 1280x864
  • [15:42:58] * meek_ (n=meek@p5B074920.dip.t-dialin.net) has joined #beagle
  • [15:43:38] * meek__ (n=meek@p5B0745B7.dip.t-dialin.net) has joined #beagle
  • [15:46:18] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-e99230a54e28a87f) has joined #beagle
  • [15:46:28] * mpoullet|work (n=mpoullet@proxye.avm.de) has left #beagle
  • [15:48:13] * meek_ (n=meek@p5B074920.dip.t-dialin.net) Quit (Read error: 60 (Operation timed out))
  • [15:48:22] <bobkatzz> koen - it seems that several of the SDR programs that I would like tot test on the BB (in Angtrom first of all) depend on gcc - but when I tried to install it it took up about 75% of my SD card before even uncompressing to I abandoned that effort
  • [15:48:42] <bobkatzz> can you tell me if there is a smaller footprint aht I could use as a toolchain
  • [15:49:17] <bobkatzz> hamlib depends on gcc and fldigi depends on hamlib so that's where I'm going with it
  • [15:49:30] <koen> try using OE to compile those
  • [15:49:44] <koen> bobkatzz: http://www.angstrom-distribution.org/building-angstrom
  • [15:49:44] <bobkatzz> what's OE?
  • [15:49:50] <bobkatzz> ok tnx
  • [15:49:50] <muriani> OpenEmbedded
  • [15:50:24] <muriani> yeah, it's the toolchain you'd use to cross-compile for Angstrom
  • [15:50:25] <bobkatzz> oh ok I think I've been there lately but did not make a connection yet :D <----sheepish grin
  • [15:50:37] * Vincent2 (i=c05b3c0a@gateway/web/ajax/mibbit.com/x-ac39fdd1ae82d347) Quit ("http://www.mibbit.com ajax IRC Client")
  • [15:50:42] <bobkatzz> yeah I have been trying to understand that
  • [15:51:12] * recalcati (i=51485a51@gateway/web/ajax/mibbit.com/x-cde06ac90a4d2cb3) Quit ("http://www.mibbit.com ajax IRC Client")
  • [15:51:34] <bobkatzz> on the other hand it would be kewl to add to your narcissus options kown
  • [15:51:42] <bobkatzz> koem
  • [15:51:47] <bobkatzz> grrrrr koen
  • [15:52:01] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-8603bc90e295c238) has joined #beagle
  • [15:52:47] <bobkatzz> i sailed all day yesterday and gripping lines and spinnaker gybes have got my fingers confused hehe
  • [15:53:20] <bobkatzz> we won though so that's the good news and by 3.5 and 4.5 minutes!
  • [15:53:40] <bobkatzz> ok on to OE then - tnx
  • [15:54:31] <bobkatzz> ah ok one question already - I do the builds on my production machine reight - not on the BB?
  • [15:55:21] <bobkatzz> then I do the dd image and untar files system like koen's packages?
  • [15:56:15] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-8603bc90e295c238) Quit (Client Quit)
  • [15:56:57] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-b3c220c079ffa93c) has joined #beagle
  • [15:57:47] <koen> right
  • [15:57:55] <bobkatzz> ok kewl
  • [15:57:56] <koen> but you don't need the dd step anymore
  • [15:58:35] <bobkatzz> yeah I wondered about that because one of the builds that I did from scratch didn't have me do that
  • [15:59:21] <bobkatzz> that's the Angstrom that I have running now - that found the ethernet adapter right away (yippee) by the way
  • [15:59:35] * meek (n=meek@p5B075026.dip.t-dialin.net) Quit (Read error: 110 (Connection timed out))
  • [15:59:58] * Crofton|bold (n=Crofton|@32.134.199.208) Quit ("jmIrc destroyed by the OS")
  • [16:00:34] <bobkatzz> ok so if I need gcc, hamlib and fldigi I can just build gcc into the system and they should compile or I have to cross-compile all of them ?
  • [16:01:04] * recalcati (i=5e51e963@gateway/web/ajax/mibbit.com/x-b3c220c079ffa93c) Quit (Client Quit)
  • [16:03:13] * ogra (n=ogra@ubuntu/member/ogra) Quit (Read error: 60 (Operation timed out))
  • [16:04:42] <bobkatzz> ok off to play - thanks guys
  • [16:05:02] <bobkatzz> i need to buy nore SD cards hehe
  • [16:05:22] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [16:05:33] <bobkatzz> can I use thumb drives?
  • [16:05:58] <bobkatzz> we've got several of those kicking around here
  • [16:18:02] * kozak (n=subbu@117.192.2.201) has joined #beagle
  • [16:18:37] <muriani> cross compile all
  • [16:18:45] <muriani> building takes a lot of space
  • [16:20:47] <bobkatzz> yeah I noticed - that's ok I have about 85G on my Linux dev box
  • [16:25:53] <bobkatzz> i notice that they have an apt-get statement that will ensure that everything needed to do builds is installed - what if some of those components are already installed - will is create any conflicts of will it ask to update?? - for instance I already have perl 5.10.0 etc.
  • [16:26:58] * gregoiregentil (n=gregoire@adsl-71-135-100-40.dsl.pltn13.pacbell.net) has left #beagle
  • [16:27:39] * mib_og46h3 (i=7aa60de8@gateway/web/ajax/mibbit.com/x-3a10260a6481a9ad) Quit ("http://www.mibbit.com ajax IRC Client")
  • [16:32:42] * florian (n=fuchs@port-217-146-132-69.static.qsc.de) Quit (Remote closed the connection)
  • [16:37:53] * JuanG (n=Juan@nat/ti/x-0be0943c039609fd) has joined #beagle
  • [16:37:55] * JuanG (n=Juan@nat/ti/x-0be0943c039609fd) has left #beagle
  • [16:45:07] <bobkatzz> any takers?
  • [16:46:33] * valhalla (n=valhalla@81-174-25-110.dynamic.ngi.it) has joined #beagle
  • [16:48:21] * greyback (n=greyback@dhcp-892b7b54.ucd.ie) Quit ()
  • [16:49:04] * Batko_Marto (n=Batko_Ma@CPE001346f996d2-CM001e6b1a8d1e.cpe.net.cable.rogers.com) Quit (Remote closed the connection)
  • [16:49:28] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) has joined #beagle
  • [16:49:37] * valhalla (n=valhalla@81-174-25-110.dynamic.ngi.it) Quit (Client Quit)
  • [16:49:59] * ant_work (n=andrea@host214-85-static.34-85-b.business.telecomitalia.it) Quit ("ChatZilla 0.9.84 [Firefox 3.0.10/2009042316]")
  • [16:53:02] <muriani> bobkatzz: frankly, I don't remember. I have OE installed on my server here, but I don't remember how iI did it.
  • [16:53:15] <muriani> ...and the image I built with it didn't work :p
  • [16:53:22] <topi_> s
  • [16:58:59] <tor2> bobkatzz: 'apt-get install' will only upgrade already-installed components that are actually specified by apt-get install, so if you have e.g. 'apt-get install componentA componentB' and you already have componentA and componentB installed and they depend on componentC, then componentA and componentB will be upgraded if there's a newer version, and componentC will be installed if it is not there. But componentC will only be upgraded (if
  • [16:58:59] <tor2> installed already) if a newer version is really required.
  • [16:59:47] <tor2> That was a general explanation, I have not seen the particular script you're working with.
  • [17:01:35] * {ISoul-W} (n=ISoul-W@d64-180-64-121.bchsia.telus.net) has joined #beagle
  • [17:04:20] * pH5_ (n=ph5@e178223155.adsl.alicedsl.de) has joined #beagle
  • [17:11:09] <rob_k> Hi
  • [17:12:54] <rob_k> what is the usual time of approving email (on bleagle miling list) by admin?
  • [17:14:49] <rob_k> (beagle mailing list)
  • [17:17:04] <koen> rob_k: whenever jason has time for it
  • [17:17:25] * koen looks for a jkridner|work
  • [17:19:12] * Wiedi (n=wiedi@newton-air.w.fruky.net) has joined #beagle
  • [17:19:59] * wiedi_ (n=wiedi@newton-air.w.fruky.net) Quit (Read error: 104 (Connection reset by peer))
  • [17:21:06] <rob_k> koen If mail is rejected (for example topic was stupid or worthless) does admin inform sender about it?
  • [17:21:26] * pH5 (n=ph5@e178212134.adsl.alicedsl.de) Quit (Read error: 110 (Connection timed out))
  • [17:23:33] <koen> dunno about that
  • [17:23:38] * pH5_ is now known as pH5
  • [17:24:45] <tomba> anyone know if there are OMAP boards with more than 256M of RAM?
  • [17:25:44] * tor2 hasn't heard of any
  • [17:28:28] <koen> tomba: 512MB PoP chips are sampling, haven't heard of actual results yet
  • [17:28:43] <Crofton> mru, ping
  • [17:28:51] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up .....Up and Awayyyyyyyy... Atom Atom Ant....")
  • [17:29:05] <tomba> kernel doesn't seem to support more than 256M with default config. I was wondering how others have fixed the problem.
  • [17:29:08] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [17:29:19] * mrc3__ (n=mrc3@nat/ti/x-06c55eadb940f1ac) Quit (Remote closed the connection)
  • [17:29:30] <Crofton> can anyone answer some NEON questions about this code segment:
  • [17:29:31] <Crofton> http://groups.google.com/group/beagleboard/browse_thread/thread/2ca91dbe2d2ac335/8f713fba9030b86a?lnk=gst&q=neon#8f713fba9030b86a
  • [17:29:33] * mrc3_ (n=mrc3@nat/ti/x-86a54ebaf878769e) has joined #beagle
  • [17:31:43] * valhalla (n=valhalla@81-174-25-110.dynamic.ngi.it) has joined #beagle
  • [17:33:41] * ceyusa (n=ceyusa@155.99.117.91.static.mundo-r.com) Quit ("Ex-Chat")
  • [17:39:14] <koen> tomba: I just heard that the 512MB test on an omap3 board wasn't a success, but that's due to other pcb issues
  • [17:39:22] <koen> tomba: next test should be in ~2 weeks
  • [17:44:58] <tomba> koen: at TI? I'm not worried about the HW, and we've got our own board. I'm just wondering how difficult it'll be to use the ram for linux
  • [17:45:32] <tor2> Isn't that a simple configuration issue?
  • [17:46:18] <tor2> Or are there some specific issues for the omap kernel?
  • [17:46:42] <koen> tomba: no, not at TI :)
  • [17:47:02] <koen> tomba: TI said "at least 3 months away" when I asked about them testing 512MB
  • [17:47:22] <tomba> tor2: not omap spesific, I think. but memory mappings will clash if you have more than 256MB
  • [17:47:26] <tomba> koen: ok =)
  • [17:53:29] <bobkatzz> tor2 - thanks - was away while things were "percolating" :)
  • [17:53:41] <tor2> np
  • [17:55:16] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Remote closed the connection)
  • [17:55:30] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [17:57:16] * greyback (n=greyback@ip-83-147-165-234.dub-3rk1.metro.digiweb.ie) has joined #beagle
  • [17:59:03] * florian (n=fuchs@g228217105.adsl.alicedsl.de) has joined #beagle
  • [18:00:24] * lifeeth_ (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [18:12:24] * ArteK_ (n=Artur@81.15.241.96) has joined #beagle
  • [18:12:43] * mib_ozx70w (i=4dc64f31@gateway/web/ajax/mibbit.com/x-a31fcf0a6fb3053b) has joined #beagle
  • [18:12:44] <bobkatzz> re: OE setup "For building a .dev branch, in your local.conf file, you should have at least the following three entries. Example for the Angstrom distribution and the Openmoko gta01 machine: "
  • [18:12:48] * ArteK (n=Artur@81.15.241.96) Quit (Remote closed the connection)
  • [18:12:52] <mib_ozx70w> hi
  • [18:12:56] <bobkatzz> what would the machine name be for the Beagleboard?
  • [18:13:20] <mib_ozx70w> it's possible to buy a beagle board on ebay???
  • [18:13:43] <bobkatzz> mib_ozx70w - Digikey .com
  • [18:13:50] <koen> bobkatzz: you're not following http://www.angstrom-distribution.org/building-angstrom
  • [18:13:51] <mib_ozx70w> thank you
  • [18:13:54] <bobkatzz> there are clones too
  • [18:14:04] * mib_ozx70w (i=4dc64f31@gateway/web/ajax/mibbit.com/x-a31fcf0a6fb3053b) Quit (Client Quit)
  • [18:14:35] <koen> bobkatzz: follow http://www.angstrom-distribution.org/building-angstrom
  • [18:15:19] <bobkatzz> oh crap - you're right - I was there and then they sent me to - http://wiki.openembedded.org/index.php/Getting_Started and I never got back (I take things rather literally - having no reason not to)
  • [18:15:33] <bobkatzz> B^) ooops!
  • [18:15:53] <bobkatzz> gotchya
  • [18:18:08] * FuL|OUT is now known as fulgas
  • [18:18:29] <bobkatzz> wow - I already did all that stuff using /home/<myusername>/ instead of /OE < -- any problem?
  • [18:18:44] * kozak (n=subbu@117.192.2.201) Quit (Remote closed the connection)
  • [18:18:56] <Crofton|work> bobkatzz, not as long as all te env vars make sense
  • [18:19:05] <bobkatzz> or can I just delete that directory and start over?
  • [18:19:17] <bobkatzz> oh ok
  • [18:19:45] <koen> bobkatzz: check the "nota bene" in http://www.angstrom-distribution.org/building-angstrom :)
  • [18:20:06] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Remote closed the connection)
  • [18:20:19] * lifeeth_ is now known as lifeeth
  • [18:21:00] <bobkatzz> right koen - I had read that and was going to do "export OETREE="/home/<myusername>/ " - would that be correct?
  • [18:21:39] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) Quit (Remote closed the connection)
  • [18:21:44] <bobkatzz> latin is highly underrated :D
  • [18:21:59] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [18:27:48] <koen> bobkatzz: that would be correct
  • [18:29:51] <Crofton|work> | arm-angstrom-linux-gnueabi-g++: /home/balister/oe/tmp/staging/armv7a-angstrom-linux-gnueabi/usr/lib/.libs/libusb.so: No such file or directory
  • [18:31:23] <koen> Crofton|work: does that file exist?
  • [18:31:41] <Crofton|work> checking in a sec
  • [18:31:43] <koen> Crofton|work: and maybe you should insert an -L/path/to/WORKDIR/libusb :)
  • [18:35:01] * meek__ (n=meek@p5B0745B7.dip.t-dialin.net) Quit ()
  • [18:35:26] * ArteK_ (n=Artur@81.15.241.96) has left #beagle
  • [18:37:04] <Crofton|work> alright dev boots again
  • [18:38:12] * mpoullet|home (n=mpoullet@77-22-121-59-dynip.superkabel.de) has joined #beagle
  • [18:38:27] <koen> Crofton|work: good!
  • [18:38:41] <JoeSchmo> i'm curious if anyone is having an issue with usb on the beagle board with a custom kernel
  • [18:38:47] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) Quit ("Leaving.")
  • [18:38:55] * Xerion (i=xerion@82-170-197-160.ip.telfort.nl) Quit (Read error: 104 (Connection reset by peer))
  • [18:39:13] <JoeSchmo> i tried the 2.6.28-omap1, 2.6.29-omap1 and even master in the linux-omap git tree
  • [18:39:34] * Leon_Nardella (n=leon@200-161-14-111.dsl.telesp.net.br) has joined #beagle
  • [18:39:59] <mpoullet|home> hi, x-loader code seems to be limited to 20kB, does someone know why?
  • [18:40:25] <mpoullet|home> AFAIR that's because of its stack, but I don't find where it's set in the code
  • [18:40:55] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) has joined #beagle
  • [18:45:17] <sakoman_> Crofton|work: I wonder why I haven't had any udev issues ?!
  • [18:45:30] <sakoman_> Work even after a clean build
  • [18:45:31] <Crofton|work> dunno
  • [18:45:54] <sakoman_> count my blessings I guess . . .
  • [18:46:17] <Crofton|work> yeah
  • [18:47:21] * rupeshgujare (n=rupesh@59.160.172.220) has left #beagle
  • [18:48:45] <sakoman_> Crofton|work: just about to test my luck with 2.6.30-rc6
  • [18:50:01] <Crofton|work> good luck
  • [18:50:14] <Crofton|work> will the patch list shrink?
  • [18:51:20] <sakoman_> still just 8 patches in my recipe
  • [18:52:26] * MarcoW (i=4ff77c66@gateway/web/ajax/mibbit.com/x-9b2a96d90163cd73) has joined #beagle
  • [18:52:30] <mpoullet|home> nobody on x-loader? what I'd like to know is if I can overcome this limitation, or if it comes from the ROM boot code itself
  • [18:52:46] <Crofton|work> I think it has to fit in internal RAM
  • [18:52:51] <sakoman_> bingo!
  • [18:53:50] * montamer (n=montamer@203.199.213.184) Quit (Success)
  • [18:55:42] <mpoullet|home> Crofton|work: SRAM is 64kB with 4kB reserved for public stack and reset vectors, pp.3386 in the TRM
  • [18:56:02] <mpoullet|home> so it stays 60kB for the downloaded image area
  • [18:56:43] <mpoullet|home> but if I put enough printf so that my x-loaders becomes bigger than 20kB, it doesn't start anymore...
  • [18:57:59] * __alanc__ (n=a-campbe@nat/ti/x-4c4803d520e7ed54) Quit ()
  • [19:05:41] * lifeeth is now known as lifeeth_
  • [19:06:12] * lifeeth_ is now known as lifeeth
  • [19:11:37] * valhalla (n=valhalla@81-174-25-110.dynamic.ngi.it) Quit ("Leaving")
  • [19:11:43] <JoeSchmo> i'm totally stumped why i cant get usb working on this thing :/
  • [19:11:58] * robclark (n=robclark@nat/ti/x-28686ca4d41327a9) Quit (Remote closed the connection)
  • [19:13:13] * mpoullet|home (n=mpoullet@77-22-121-59-dynip.superkabel.de) has left #beagle
  • [19:15:26] <JoeSchmo> if anyone has any tips or hints it'd be appreciated
  • [19:17:26] * ArteK (n=Artur@81.15.241.96) has joined #beagle
  • [19:17:54] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-e99230a54e28a87f) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:17:55] * szricky (i=74061432@gateway/web/ajax/mibbit.com/x-ec29969fed178de8) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:17:55] * mib_t9u41i (i=d91e4006@gateway/web/ajax/mibbit.com/x-44ec40bc4099faa5) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:17:56] * mib_bn9dap (i=d59f6bd6@gateway/web/ajax/mibbit.com/x-8430790c7569f125) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:18:04] * MarcoW (i=4ff77c66@gateway/web/ajax/mibbit.com/x-9b2a96d90163cd73) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:18:04] * rob_k (i=5a9c5284@gateway/web/ajax/mibbit.com/x-8123e47a3311e7d2) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:18:32] * Beagle1 (n=Beagle1@90.147.0.185) has joined #beagle
  • [19:18:48] * Beagle1 (n=Beagle1@90.147.0.185) Quit (Client Quit)
  • [19:19:48] * mib_bn9dap (i=d59f6bd6@gateway/web/ajax/mibbit.com/x-2989e951eb0d45f2) has joined #beagle
  • [19:20:13] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-313de3a2a67903d8) has joined #beagle
  • [19:20:33] <bobkatzz> hmmm got terminated (sounds bad, hehe)
  • [19:20:47] <bobkatzz> so did you get that koen?
  • [19:22:39] * KosiNuss (n=tom@R2cd3.r.pppool.de) has joined #beagle
  • [19:25:36] <mru> Crofton|work: pong
  • [19:25:43] <Crofton|work> hey
  • [19:26:02] <Crofton> I'm trying to figure out how your NEON really works
  • [19:26:13] <Crofton> http://groups.google.com/group/beagleboard/browse_thread/thread/2ca91dbe2d2ac335/8f713fba9030b86a?lnk=gst&q=neon#8f713fba9030b86a
  • [19:26:26] <bobkatzz> couldn't find any OE User Manual at the link on the Building Angstrom page
  • [19:26:57] <Crofton> I'm confused about some things
  • [19:27:05] <Crofton> for example
  • [19:27:22] <Crofton> it looks like it multiplies and adds 4 numbers
  • [19:27:43] <Crofton> but the subs instruction subtracts 8
  • [19:28:08] <Crofton> wait
  • [19:28:34] <Crofton> vldl says take two 32bit numbers and stick them in one d register ....
  • [19:28:56] <Crofton> that is what the l means
  • [19:29:16] * MarcoW (n=quassel@p4FF77C66.dip.t-dialin.net) has joined #beagle
  • [19:29:51] <bobkatzz> so I'm kinda dead in the water here until I find out what to do next :\
  • [19:32:22] <bobkatzz> note to folks (well intentioned as they may be) - information != instructions
  • [19:33:25] <bobkatzz> so far I have alot (all? most?) of the information about how to build Angstrom for BB - but so far no (complete) instructions
  • [19:33:44] <topi_> Crofton: do you have any previous experience from other SIMD instruction sets?
  • [19:33:55] <topi_> NEON isn't much different from e.g. Altivec insn set
  • [19:33:56] <Crofton|work> not really :)
  • [19:34:07] <bobkatzz> they just kind of die on step 4 of Building Angstrom
  • [19:34:11] <topi_> oh, then some simd basics would be in order :)
  • [19:34:22] <Crofton|work> heh
  • [19:34:27] <Crofton|work> I know the basic idea
  • [19:34:36] <Crofton|work> what was escaping me was the l
  • [19:34:51] <topi_> you just partition one SIMD register to subunits, and then do the same math on all of them
  • [19:34:54] <bobkatzz> (going to get a beer while someone decides my fate :D)
  • [19:35:25] <topi_> you add or subtract 4 values if the registers are 64 bits, and 8 values if the registers are 128 bits
  • [19:35:31] <topi_> and you're using 16 bit arithmetic
  • [19:35:59] <topi_> NEON lets you view the register bank as 64 bit or 128 bit registers
  • [19:39:12] <Crofton|work> ! is a post increment operator in the asm?
  • [19:41:05] <bobkatzz> I'm trying to get to Chicago - I hope someone has not given me directions to L.A. :)
  • [19:42:03] * KosiNuss (n=tom@R2cd3.r.pppool.de) Quit (Read error: 104 (Connection reset by peer))
  • [19:42:20] * KosiNuss (n=tom@R2cd3.r.pppool.de) has joined #beagle
  • [19:44:09] * john3909 (n=jsynesio@99-26-125-126.lightspeed.sndgca.sbcglobal.net) Quit (Connection timed out)
  • [19:45:03] <solar> thumb2 seems to make a lot of things misbehave
  • [19:47:17] <bobkatzz> is about 10 minutes away from declaring Beagleboard unsuitable, at the present time, for the requirements of successfully running SDR software for the Soft Rock 6.3
  • [19:48:26] <bobkatzz> = 2 weeks mired down in distro/build/ak/splat hell
  • [19:48:45] <bobkatzz> but an interesting platform nonetheless
  • [19:49:00] <bobkatzz> I'm just out of time is all
  • [19:50:00] * bisco (i=5a9300b9@gateway/web/ajax/mibbit.com/x-56a0c9687255bcca) has joined #beagle
  • [19:50:57] <bobkatzz> I'm ready to bitbake some cookies and someone turned the power off to the kitchen
  • [19:51:06] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit (Remote closed the connection)
  • [19:52:49] * lifeeth (n=praneeth@unaffiliated/lifeeth) has joined #beagle
  • [19:53:10] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-313de3a2a67903d8) Quit ("http://www.mibbit.com ajax IRC Client")
  • [19:56:59] <mru> solar: the cortex-a8 in the omap has a nasty hw bug re thumb2
  • [19:57:40] <mru> solar: it can be worked around w/ compiler help
  • [19:57:58] <mru> but compilers aren't quite ready yet
  • [19:58:09] * principessa (i=187f0da7@gateway/web/ajax/mibbit.com/x-56c59cf953238477) has joined #beagle
  • [19:58:11] <mru> don't have an eta
  • [20:00:04] <principessa> is there a diagram fo the steps for building Angstrom images for the Beagleboard?
  • [20:00:39] <solar> mru: problem would yeild illegal instruction?
  • [20:00:41] <Crofton|work> diagram?
  • [20:00:50] <principessa> flow chart
  • [20:00:53] <principessa> of sorts
  • [20:01:36] <principessa> for us visually-oriented types
  • [20:01:59] <Crofton|work> heh
  • [20:02:01] <principessa> isn't that how most software is written?
  • [20:02:06] <Crofton|work> not that I now off
  • [20:02:24] <principessa> block diagrams of the table structure etc.
  • [20:02:32] <adj> just put some boxes and balloons around the text from here and you'll have DIY flowchart:
  • [20:02:36] <adj> http://elinux.org/BeagleBoardAndOpenEmbeddedGit
  • [20:02:42] <Crofton|work> this armv7a rf manual is not written in English
  • [20:02:52] <principessa> hm ok thanks
  • [20:03:19] <mru> solar: yes, sigill is a possibility
  • [20:03:53] <mru> solar: does it work if you disable branch prediction?
  • [20:04:35] <solar> it kinda works fine. Just every so often I'm hitting some illegal instructions.
  • [20:05:24] <solar> mru: while using -Os -pipe -march=armv7-a -mtune=cortex-a8 -mfpu=neon -mfloat-abi=softfp -Wa,--noexecstack -fomit-frame-pointer -marm -mthumb
  • [20:06:26] <principessa> adj - yes that would work fine - thanks
  • [20:07:55] <adj> np :)
  • [20:08:08] <principessa> so, adj if I wanted to add some packages to the image how would i do that - say add package -foobar
  • [20:08:31] <principessa> and what if it had dependancies?
  • [20:08:46] <principessa> like foobar needed foo and bar
  • [20:09:18] <adj> sorry, my knowledge of OE is pretty much limited to "bitbake foobar" :(
  • [20:09:23] * robclark (n=robclark@nat/ti/x-a1d65fa0dfc4ff56) has joined #beagle
  • [20:09:44] <Crofton|work> principessa, look at the recipes in recipes/images
  • [20:10:31] <principessa> ok does that result in foobar being generated in an entire Beagleborad Angstrom image that will bot and run on BB?
  • [20:10:36] <solar> can't you install via ipkg/opkg with OE after the initial image building time?
  • [20:10:48] <principessa> oh ok thanks Crofton
  • [20:11:47] <Crofton|work> mru, got a sec
  • [20:12:04] <principessa> is that a link? recipes/images?
  • [20:12:09] <Crofton|work> no
  • [20:12:20] <Crofton|work> a directory in the OE metadata
  • [20:12:43] <principessa> metadata? where is that found?
  • [20:12:53] <Crofton|work> the openembedded directory
  • [20:14:13] <principessa> oh ok I was at http://elinux.org/BeagleBoardAndOpenEmbeddedGit that adj sent me to
  • [20:14:31] * tor2 is now known as tor2|away
  • [20:14:53] <principessa> so I must have to go some place else
  • [20:23:05] <principessa> I googled OE metadata but did not find anything called "recipes/images" - where are they found (a link would be helpful)
  • [20:23:42] <Crofton|work> have you installed OE?
  • [20:24:16] <principessa> installed OE? no is that a prerequisite?
  • [20:24:56] <Crofton|work> hmm, you have an Angstrom image already?
  • [20:25:35] * _Lucretia_ (n=Lucretia@5ac2a25a.bb.sky.com) Quit (Read error: 113 (No route to host))
  • [20:26:03] <principessa> no I don't - it was just mentioned that you have to build images to run on the Beagleboard
  • [20:26:15] <principessa> so I wondered how you do that
  • [20:29:53] <adj> well, if you want to build images with OE you'll propably should install OE
  • [20:30:52] <principessa> then they will run on the Beagleboard?
  • [20:31:29] <adj> packages built for beagle using OE will run on beagle
  • [20:32:06] <principessa> oh ok - so I download OE?
  • [20:32:30] * pH5 (n=ph5@e178223155.adsl.alicedsl.de) Quit (Read error: 110 (Connection timed out))
  • [20:34:57] <principessa> when I googled "EO download" it took me to Outlook Express? I thought Beagleboard and Angstrom were Linux
  • [20:35:31] <principessa> OE - sorry
  • [20:35:45] * ArteK (n=Artur@81.15.241.96) has left #beagle
  • [20:36:44] <principessa> I think I need to get my brother to help me with this - thank you
  • [20:37:35] * principessa (i=187f0da7@gateway/web/ajax/mibbit.com/x-56c59cf953238477) Quit ("http://www.mibbit.com ajax IRC Client")
  • [20:41:54] * myhrman (n=miranda@h-159-76.A155.priv.bahnhof.se) Quit (Read error: 104 (Connection reset by peer))
  • [20:51:57] <JoeSchmo> FINALLY, found the ehci patch i was looking for, usb is working on 2.6.29
  • [20:52:16] * Guest768 (i=4582f1d5@gateway/web/ajax/mibbit.com/x-bc7322ec240c11f2) has joined #beagle
  • [21:02:19] * eFfeM (n=Frans@195-241-226-180.ip.telfort.nl) Quit (Read error: 104 (Connection reset by peer))
  • [21:03:53] * mib_b5d9li (i=18c00484@gateway/web/ajax/mibbit.com/x-6e4e500305a0d5ab) has joined #beagle
  • [21:05:04] * mib_b5d9li (i=18c00484@gateway/web/ajax/mibbit.com/x-6e4e500305a0d5ab) Quit (Client Quit)
  • [21:05:17] * john3909 (n=jsynesio@99-26-125-126.lightspeed.sndgca.sbcglobal.net) has joined #beagle
  • [21:05:29] * geckosenator (n=sean@71.237.94.78) Quit (Read error: 110 (Connection timed out))
  • [21:09:24] * KosiNuss (n=tom@R2cd3.r.pppool.de) Quit (Remote closed the connection)
  • [21:13:58] * maelcum (n=horst@78.52.134.101) has joined #beagle
  • [21:27:32] * geckosenator (n=sean@71.237.94.78) has joined #beagle
  • [21:39:45] <geckosenator> ds2: ping
  • [21:42:15] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [21:52:56] * _Lucretia_ (n=Lucretia@5ac2a25a.bb.sky.com) has joined #beagle
  • [22:02:29] * mib_bn9dap (i=d59f6bd6@gateway/web/ajax/mibbit.com/x-2989e951eb0d45f2) Quit ("http://www.mibbit.com ajax IRC Client")
  • [22:09:15] * lifeeth (n=praneeth@unaffiliated/lifeeth) Quit ("Up .....Up and Awayyyyyyyy... Atom Atom Ant....")
  • [22:11:35] * _Lucretia_ (n=Lucretia@5ac2a25a.bb.sky.com) Quit (Read error: 113 (No route to host))
  • [22:19:48] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-3d5268836c3ca053) has joined #beagle
  • [22:19:56] <bobkatzz> OE:beagleboard \[\033[01;32m\]OE:$MY_OE_CONF\[\033[00m\] ${PS1}bitbake console-imageCommand 'bitbake' is available in '/usr/bin/bitbake' The command could not be located because '/usr/bin' is not included in the PATH environment variable.
  • [22:19:58] * elesueur (n=elesueur@120.18.108.40) has joined #beagle
  • [22:21:07] <bobkatzz> it seems there is a different PATH variable once I execute "source $OETREE/beagleboard/profile.sh"
  • [22:21:52] * ddompe (n=ddompe@200.122.155.113) Quit ()
  • [22:21:53] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-3d5268836c3ca053) Quit (Client Quit)
  • [22:22:35] * bobkatzz (i=187f0da7@gateway/web/ajax/mibbit.com/x-043c39b600edf3b1) has joined #beagle
  • [22:23:00] <bobkatzz> so that was a surprize
  • [22:26:49] * zedstar (n=john@fsf/member/zedstar) Quit (Read error: 110 (Connection timed out))
  • [22:31:56] * likewise (n=chatzill@82-171-51-231.ip.telfort.nl) Quit ("ChatZilla 0.9.84 [Firefox 3.0.10/2009042523]")
  • [22:39:40] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [22:43:47] * Wiedi (n=wiedi@newton-air.w.fruky.net) Quit ("^C")
  • [22:44:52] * Olipro (n=Olipro@uncyclopedia/pdpc.active.olipro) Quit (Nick collision from services.)
  • [22:45:03] * Olipro (n=Olipro@uncyclopedia/pdpc.active.olipro) has joined #beagle
  • [22:49:21] * zumbi (n=zumbi@77.225.184.78) Quit (Read error: 113 (No route to host))
  • [22:50:27] <topi_> darn, mplayer complains that Xv doesn't support my hw. anyone having problems with Xvideo?
  • [22:50:45] <topi_> Xorg clearly has Xvideo extension since it's being reported in /var/log/Xorg.0.log
  • [22:51:09] <topi_> and i'm talking about angstrom distro.
  • [22:51:54] <solar> I'm testing this feature right now. mplayer -vo xv foo.mpg seems to work.
  • [22:52:29] <solar> diff distro however.
  • [22:56:52] * elesueur (n=elesueur@120.18.108.40) Quit (Read error: 110 (Connection timed out))
  • [22:57:10] * robclark (n=robclark@nat/ti/x-a1d65fa0dfc4ff56) Quit (Remote closed the connection)
  • [23:03:09] * abitos (n=nixgibts@dslb-084-057-193-137.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [23:03:50] * elesueur (n=elesueur@vampire.ertos.nicta.com.au) has joined #beagle
  • [23:04:13] * XorA is now known as XorA|gone
  • [23:05:45] * bisco (i=5a9300b9@gateway/web/ajax/mibbit.com/x-56a0c9687255bcca) Quit ("http://www.mibbit.com ajax IRC Client")
  • [23:10:27] <bobkatzz> solar - are you familiar with the "Building Angstrom" page?
  • [23:12:04] * pfoetche1 (n=pfoetche@dslb-092-075-115-084.pools.arcor-ip.net) has joined #beagle
  • [23:12:17] <bobkatzz> I'm not clear what to do with the file that is downloaded called "source.txt" does that become the local.conf file?
  • [23:12:39] <bobkatzz> it seems they have similar (but not identical) contents
  • [23:14:39] <solar> bobkatzz: no not really. I'm testing everything from the gentoo pov.
  • [23:14:46] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [23:16:12] * ddompe (n=ddompe@ip2-28-10-190.ct.co.cr) has joined #beagle
  • [23:16:17] <solar> and expect for the hardware doing a usb reset under any type of load it's working pretty good
  • [23:25:16] * alecrim (n=alecrim@189.2.128.130) Quit (Read error: 60 (Operation timed out))
  • [23:27:03] * rsalveti (n=rsalveti@200.184.118.130) Quit (Remote closed the connection)
  • [23:27:36] * robclark (n=robclark@nat/ti/x-3b0e3ee1e5d9400b) has joined #beagle
  • [23:28:08] * pfoetchen (n=pfoetche@dslb-092-075-115-084.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [23:29:42] * j_ack (n=rudi@dsbg-4db5f716.pool.einsundeins.de) Quit ("Verlassend")
  • [23:38:36] * montamer (n=montamer@203.199.213.184) has joined #beagle
  • [23:47:32] * mib_bn9dap (i=d59f6bd6@gateway/web/ajax/mibbit.com/x-ec405e660336e962) has joined #beagle
  • [23:48:32] * rsalveti (n=rsalveti@189.70.40.205) has joined #beagle
  • [23:48:54] * florian (n=fuchs@g228217105.adsl.alicedsl.de) Quit ("Verlassend")
  • [23:49:23] <bobkatzz> hmm ok
  • [23:50:29] * MarcoW (n=quassel@p4FF77C66.dip.t-dialin.net) Quit ("http://quassel-irc.org - Chat comfortably. Anywhere.")
  • [23:51:48] <bobkatzz> something must read the source.txt to set the environment variables
  • [23:57:03] * pfoetche1 (n=pfoetche@dslb-092-075-115-084.pools.arcor-ip.net) Quit ("leaving")
  • [23:57:24] * davidcb (n=david@m165e36d0.tmodns.net) has joined #beagle