• [00:02:42] * JoeyBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) has joined #beagle
  • [00:04:22] * tulpe (n=ask@p54AF6105.dip.t-dialin.net) Quit (Read error: 110 (Connection timed out))
  • [00:04:27] * tulpe (n=ask@p54AF5965.dip.t-dialin.net) has joined #beagle
  • [00:04:29] * abitos (n=nixgibts@dslb-084-057-204-099.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [00:04:56] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) Quit ()
  • [00:08:30] * robclark (n=robclark@nat/ti/x-078a055f075f68df) Quit (Remote closed the connection)
  • [00:13:29] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [00:14:35] * robtow1 (n=rtow@nat/montavista/x-81f97fdfc7f7bd3d) has joined #beagle
  • [00:21:14] * zedstar (n=john@fsf/member/zedstar) Quit (Remote closed the connection)
  • [00:22:38] * robtow (n=rtow@nat/montavista/x-1b3ddacb3fcc8ae3) Quit (Read error: 110 (Connection timed out))
  • [00:27:12] * robtow (n=rtow@nat/montavista/x-3ee45c48c208ee0b) has joined #beagle
  • [00:27:23] * ShadowJK_ (i=jk@terminus.enivax.net) has joined #beagle
  • [00:27:30] * uwe_ (n=uwe_@dslb-084-056-037-048.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [00:27:44] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 145 (Connection timed out))
  • [00:28:45] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) has joined #beagle
  • [00:30:16] * uwe_ (n=uwe_@dslb-084-056-037-048.pools.arcor-ip.net) has joined #beagle
  • [00:31:11] * robclark (n=robclark@32.176.162.190) has joined #beagle
  • [00:32:37] <PapaGrillo> does anybody use the line microphone connector on the beagleboard?
  • [00:37:57] * ShadowJK (i=jk@terminus.enivax.net) Quit (Read error: 110 (Connection timed out))
  • [00:39:46] * robtow1 (n=rtow@nat/montavista/x-81f97fdfc7f7bd3d) Quit (Read error: 110 (Connection timed out))
  • [00:42:51] * jimt (n=jim@202.27.212.33) has joined #beagle
  • [00:47:18] * robclark (n=robclark@32.176.162.190) Quit ()
  • [00:51:32] * fulgas is now known as FuL|OUT
  • [01:04:03] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [01:09:17] * florian (n=fuchs@f049170189.adsl.alicedsl.de) Quit ("Verlassend")
  • [01:20:39] * ssvb (n=ssvb___@a88-114-221-132.elisa-laajakaista.fi) Quit ("Leaving")
  • [01:22:10] * robtow (n=rtow@nat/montavista/x-3ee45c48c208ee0b) Quit (Read error: 145 (Connection timed out))
  • [01:26:47] * AV500 (n=av500@p50996ded.dip0.t-ipconnect.de) Quit (Read error: 110 (Connection timed out))
  • [01:27:11] * wiking (n=wiking@huwico/staff/wiking) Quit (Remote closed the connection)
  • [01:27:24] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [01:36:42] * _apk (n=kows@85-18-136-98.fastres.net) Quit (Read error: 60 (Operation timed out))
  • [01:45:50] * _apk (n=kows@85-18-136-98.fastres.net) has joined #beagle
  • [02:04:03] * emeb (n=ericb@ip72-223-90-212.ph.ph.cox.net) has left #beagle
  • [02:16:29] * jrmuizel_ (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:17:14] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) has joined #beagle
  • [02:17:53] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Read error: 110 (Connection timed out))
  • [02:21:58] * jrmuizel_ (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [02:24:36] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:28:47] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Client Quit)
  • [02:35:12] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
  • [02:36:49] * emeb_mac (n=ericb@ip72-223-90-212.ph.ph.cox.net) Quit (Client Quit)
  • [02:41:12] * AV500 (n=av500@p50996ded.dip0.t-ipconnect.de) has joined #beagle
  • [02:48:01] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [02:56:48] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [03:02:51] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
  • [03:03:11] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
  • [03:05:27] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [03:09:58] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [03:10:03] * tulpe (n=ask@p54AF5965.dip.t-dialin.net) Quit (Read error: 60 (Operation timed out))
  • [03:10:51] * tulpe (n=ask@p54AF5665.dip.t-dialin.net) has joined #beagle
  • [03:17:40] * Beagle3 (n=Beagle3@208-100-140-231.bendbroadband.com) has joined #beagle
  • [03:19:00] * JoeyBorn (n=jborn@dsl017-022-252.chi1.dsl.speakeasy.net) Quit (Read error: 110 (Connection timed out))
  • [03:19:00] * Beagle3 is now known as _altered
  • [03:20:41] * NishanthM (n=Nishanth@cpe-76-186-218-144.tx.res.rr.com) has joined #beagle
  • [03:30:48] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [03:59:08] * _altered (n=Beagle3@208-100-140-231.bendbroadband.com) Quit ()
  • [04:04:46] * tulpe (n=ask@p54AF5665.dip.t-dialin.net) Quit (Read error: 60 (Operation timed out))
  • [04:04:53] * tulpe (n=ask@p54AF6EE5.dip.t-dialin.net) has joined #beagle
  • [04:05:55] * NishanthM (n=Nishanth@cpe-76-186-218-144.tx.res.rr.com) Quit ("Sand fleas eating the Internet cables")
  • [04:21:37] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [04:29:53] * tzhau__ (n=tzhau@41.247.182.142) has joined #beagle
  • [04:31:56] * tzhau_ (n=tzhau@41.247.182.142) Quit (Read error: 110 (Connection timed out))
  • [04:43:34] * Wowbagger_ (n=wowbagge@d154-20-138-76.bchsia.telus.net) has joined #beagle
  • [04:44:09] * jrmuizel_ (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [04:44:58] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit (Read error: 104 (Connection reset by peer))
  • [04:51:06] * jrmuizel_ (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [05:01:35] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [05:14:04] * gregoiregentil (n=zonbu@71.135.114.242) has left #beagle
  • [05:59:06] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [06:12:59] * Shivdas (n=root@59.160.172.220) has joined #beagle
  • [06:16:37] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) Quit (Read error: 104 (Connection reset by peer))
  • [06:16:57] * TehUni (n=cory@c-24-30-35-55.hsd1.ga.comcast.net) has joined #beagle
  • [06:20:19] * poussa (n=poussa@a91-154-110-228.elisa-laajakaista.fi) has joined #beagle
  • [06:25:28] * robtow (n=rtow@64.62.142.114) has joined #beagle
  • [06:28:58] * supo (n=supo@s-inf-pc117.oulu.fi) has joined #beagle
  • [06:46:35] * robtow (n=rtow@64.62.142.114) Quit (Read error: 110 (Connection timed out))
  • [06:49:03] * Wowbagger_ (n=wowbagge@d154-20-138-76.bchsia.telus.net) Quit (Client Quit)
  • [06:56:59] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [07:03:30] * _bernie (n=bernie@trinity.develer.com) has joined #beagle
  • [07:06:44] * poussa (n=poussa@a91-154-110-228.elisa-laajakaista.fi) Quit (Read error: 110 (Connection timed out))
  • [07:25:34] * aanishn (n=aanishn@59.160.172.220) has joined #beagle
  • [07:41:45] * soman (n=somnath@61.16.248.242) Quit (Read error: 113 (No route to host))
  • [08:13:28] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) has joined #beagle
  • [08:37:56] * Robot_kolej (n=robot@robot.kolej.mff.cuni.cz) has joined #beagle
  • [08:38:05] <Robot_kolej> good morning
  • [08:38:28] <Robot_kolej> does anybody have experience with pin-muxing on beagle ?
  • [08:40:15] <ds2> can you be more vague =)
  • [08:44:04] <Robot_kolej> so the UART2 pins on expansion port.. I followed hy-research article about how to set it up correctly, and i get only RX working.
  • [08:48:27] <Robot_kolej> isnt there something like set dirrection on the uart_tx pin that i should be aware of ?
  • [08:49:14] <ds2> RX as in receiving stuff?
  • [08:49:24] <Robot_kolej> yes
  • [08:49:31] <ds2> I have seen the opposite problem... where you can't receive but you can transmit to the PC side
  • [08:49:57] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [08:50:15] <ds2> Hmmmm, not sure what's with the reverse problem... sure you got the right ball routed? there are 2 sets of RX/TX pins for that UART
  • [08:50:48] <ds2> which GPIO/PIN you using? and are you the one that sent mail?
  • [08:51:01] <Robot_kolej> 2 of them are part of the MCBSP3
  • [08:51:16] <Robot_kolej> and 2 of them are part of the UART2
  • [08:52:09] <Robot_kolej> so I set the UART2 pins to mode4 (gpio), and the mcbsp3 pins to mode1 (uart)
  • [08:53:21] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [08:53:35] <ds2> Hmmm does your definition for TX look like this:
  • [08:53:47] <ds2> +MUX_CFG_34XX("AF5_3430_UART2_TX", 0x170,
  • [08:53:47] <ds2> + OMAP34XX_MUX_MODE1 | OMAP34XX_PIN_OUTPUT
  • [08:54:19] <ds2> you probally have the newer names
  • [08:56:31] <Robot_kolej> it does ..
  • [08:57:02] <ds2> how do you know it is not working? are you putting the 1.8V side on the scope or?
  • [08:57:42] <Robot_kolej> i put a jumper across those two pins ... i should get loopback
  • [08:58:01] <koen> sweet, sdl 1.3 will have GLES support
  • [08:58:20] <Robot_kolej> actually i have a 1.8 <-> 5v converter connected on a expansion board and then the loopback jumper
  • [08:59:05] <ds2> then how did you verify RX works if it is just a loopback?
  • [08:59:35] <Robot_kolej> i have computer with serial port ;) and ttl->rs232 converter
  • [08:59:55] <ds2> reason I am asking is the RX lines are routed by U-boot to the wrong ball and what you need to do is route the RX to the right ball AND unroute it to the wrong ball
  • [09:01:26] <ds2> all I can right now is verify you got the right pins, IIRC, the pin out on the SRM has a typo...
  • [09:02:06] <ds2> at least the older ones, I haven't looked at the current ones... Gerald pointed out the typo so I assume he knows about it
  • [09:03:37] <Robot_kolej> do you have the register addresses for the tx and rx pin ?
  • [09:03:53] <Robot_kolej> i think thats the fastest way to check
  • [09:04:16] <ds2> not sure what you mean... the UART emulates a 16550
  • [09:04:36] <Robot_kolej> the MUX register offset
  • [09:04:44] <ds2> 0x170 for TX
  • [09:04:58] <ds2> 0x172 for RX
  • [09:06:25] <Robot_kolej> ds2: http://pastebin.com/d62daca1e this is my config
  • [09:08:15] <ds2> that part looks fine
  • [09:10:16] <ds2> it is 0100 here...
  • [09:10:39] <Robot_kolej> 0100 ? what do you mean ?
  • [09:11:08] <ds2> check to see if the pin outs changed from the B4 SRM to the current SRM... if not, there is a typo there relating to the UART... that might be your problem
  • [09:11:28] <ds2> 0100 as in 1 hour past midnight here
  • [09:13:15] <Robot_kolej> MUX: setup XXX_3430_UART2_TX (0xd8002170): 0x0004 -> 0x0001
  • [09:13:15] <Robot_kolej> MUX: setup XXX_3430_UART2_RX (0xd8002172): 0x0004 -> 0x0101
  • [09:13:26] <Robot_kolej> this is the debug output from the muxing
  • [09:13:37] <ds2> check your hardware wiring@#%%$^%$#^%$#%#QWE
  • [09:18:20] <geckosenator> is there a website that hosts beagle related projects?
  • [09:18:24] <geckosenator> or do I have to find my own host
  • [09:20:45] <Robot_kolej> ds2: this is insane !!! the srm B5 should be for the B5 board and not for the older one
  • [09:21:12] <ds2> Robot_kolej: should be but I have seen typos carried forward
  • [09:21:35] <Robot_kolej> ds2: this fixes my problem :) thanks a lot
  • [09:22:04] <Robot_kolej> now i have to do some hacking job on my expansion board ...
  • [09:23:55] <geckosenator> Robot_kolej: expansion board? what are you making?
  • [09:23:58] <geckosenator> Robot_kolej: I'm making one
  • [09:24:41] <Robot_kolej> i have one with CAN transciever, battery charger, and uart output
  • [09:25:11] <ds2> btw, here is the mail thread - http://groups.google.com/group/beagleboard/browse_thread/thread/6c060f45355a8c10
  • [09:25:18] <geckosenator> Robot_kolej: why CAN? I hate can
  • [09:25:35] <geckosenator> Robot_kolej: mine just level translates to 3.3v and gives you the same exact header back
  • [09:25:53] <ds2> Robot_kolej: I'll update the page with the info
  • [09:26:30] <Robot_kolej> ds2: ok thanks :)
  • [09:26:52] <Robot_kolej> geckosenator: can ? because we need it for the project ... ;)
  • [09:26:57] <geckosenator> heh ok
  • [09:27:08] <geckosenator> Robot_kolej: how about mmc?
  • [09:28:08] <Robot_kolej> I dont need that really :)
  • [09:30:24] * tzhau__ (n=tzhau@41.247.182.142) Quit (Read error: 60 (Operation timed out))
  • [09:30:49] * soman (n=somnath@61.16.248.242) Quit (No route to host)
  • [09:31:03] * tzhau__ (n=tzhau@41.247.182.142) has joined #beagle
  • [09:36:18] <geckosenator> would it be a good idea to start a website to document beagle board expansion hardware?
  • [09:38:15] <keesj> why not a wiki page?
  • [09:38:31] <geckosenator> yeah
  • [09:38:36] <geckosenator> well I
  • [09:38:56] <geckosenator> I could just add it to the main beagle wiki I guess
  • [09:40:14] <geckosenator> but I need to host other files besides wiki pages
  • [09:40:27] <geckosenator> like the gerber layouts, or schematic files
  • [09:40:33] * abitos (n=nixgibts@dslb-084-057-204-099.pools.arcor-ip.net) has joined #beagle
  • [09:41:50] <kblin> you can attach files to google code wiki pages, I think
  • [09:42:01] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [09:44:23] <geckosenator> hmm
  • [09:48:33] * jimt_ (n=jim@202.27.212.33) has joined #beagle
  • [09:52:53] * jimt (n=jim@202.27.212.33) Quit (Read error: 113 (No route to host))
  • [10:00:49] * RogerMonk (n=a0740758@nat/ti/x-3eaabf38f1616dd2) has joined #beagle
  • [10:02:08] <koen> tomba: seems your clock patch is finally accepted as doing the right thing :)
  • [10:11:32] * soman (n=somnath@61.16.248.242) Quit (Read error: 60 (Operation timed out))
  • [10:15:14] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) has joined #beagle
  • [10:16:23] <koen> RogerMonk: good morning!
  • [10:21:26] * xzcvczx (n=xzcvczx@gentoo/user/xzcvczx) Quit (Remote closed the connection)
  • [10:42:48] * Robot_kolej (n=robot@robot.kolej.mff.cuni.cz) has left #beagle
  • [10:47:52] * abitos (n=nixgibts@dslb-084-057-204-099.pools.arcor-ip.net) Quit (Nick collision from services.)
  • [10:48:09] * abitos (n=nixgibts@dslb-084-057-160-005.pools.arcor-ip.net) has joined #beagle
  • [10:52:49] * florian (n=fuchs@217.146.132.69) has joined #beagle
  • [10:55:54] * nemequ (n=nemequ@ip68-111-215-155.sd.sd.cox.net) Quit (Read error: 110 (Connection timed out))
  • [11:10:32] * _apk (n=kows@85-18-136-98.fastres.net) Quit (Read error: 110 (Connection timed out))
  • [11:11:07] * zedstar (n=john@fsf/member/zedstar) has joined #beagle
  • [11:13:43] <RogerMonk> hey koen!
  • [11:13:51] <RogerMonk> nice work with dsplink on 2.6.27!
  • [11:14:08] <florian> good morning
  • [11:17:52] <koen> RogerMonk: it was sort of a false alarm
  • [11:18:00] <koen> RogerMonk: I had two kernels in staging
  • [11:18:00] * jsync (n=jess@59.160.172.220) Quit (Remote closed the connection)
  • [11:18:05] <koen> RogerMonk: but I fixed that :)
  • [11:18:41] <koen> + if [ $(echo ${KERNEL_VERSION} | cut -c5,6) -gt 26 ] ; then
  • [11:18:41] <koen> + sed -i -e s:asm/semaphore:linux/semaphore: ${S}/gpp/src/osal/Linux/user.c
  • [11:18:44] <koen> + sed -i -e s:asm/semaphore:linux/semaphore: ${S}/gpp/src/osal/Linux/2.6.18/sync.c
  • [11:19:06] <koen> + fi
  • [11:19:27] <RogerMonk> great - yep, I was surprised not to see any path changes
  • [11:22:17] <koen> I was surprised as well and then I got suspicious
  • [11:22:52] * fr3men (n=fr3men@ip-5-146.sn2.eutelia.it) has joined #beagle
  • [11:23:31] <RogerMonk> koen - nice work though - that's a great help
  • [11:28:10] <koen> now I have a kernel with XV, dsp and sgx support :)
  • [11:28:23] <khasim> koen: great
  • [11:28:25] <RogerMonk> sweet!
  • [11:28:44] <RogerMonk> sounds like we're close to some awesome mythtv support :)
  • [11:35:31] * koen wonders if qt3 gl has a gles mode
  • [11:36:32] <jkridner> koen: I was about to try to test a kernel with an SGX user-space. Do you have an update I should try instead of yesterday's build?
  • [11:38:06] <koen> jkridner: nothing worth mentioning
  • [11:38:18] <koen> jkridner: I only enable forced module loading for lpm
  • [11:38:29] <jkridner> k
  • [11:38:32] <koen> that' shouldn't impact sgc
  • [11:38:35] <koen> sgx*
  • [11:47:40] * koen refreshes DHL page
  • [11:59:23] <Crofton> heh, whats coming?
  • [11:59:49] * Crofton is not going off percocet today :(
  • [12:01:44] <jkridner> koen, your readme shows loading MLO into the flash. is that right, or should it be x-load.bin.ift?
  • [12:02:43] <Crofton> so dsplink works with modern kernel now?
  • [12:05:35] <koen> Crofton: pico DLP
  • [12:05:48] <koen> jkridner: AIUI that doesn't matter
  • [12:06:05] <koen> Crofton: all kernel modules do
  • [12:06:32] <jkridner> they are currently different sizes, which indicates to me they have different behaviors.
  • [12:07:45] <koen> one is signed and the other isn't
  • [12:07:51] <koen> that should be the only difference
  • [12:08:32] <koen> RogerMonk: I'm having trouble building dsplink_1.60.bb now, I hooked in your kbuild stuff, but it doesn't seem to build dsplink.lib now
  • [12:09:33] <koen> Crofton: I moved beagle to 2.6.27 now
  • [12:09:43] <Crofton> yeah
  • [12:09:55] <Crofton> and that includes dsplink?
  • [12:10:26] <koen> dsplink builds against all kernels now :)
  • [12:10:36] <koen> (at least, dsplink-module does)
  • [12:10:50] <Crofton> do any on the samples work?
  • [12:11:09] <koen> well
  • [12:11:12] <koen> 13:07 < koen> RogerMonk: I'm having trouble building dsplink_1.60.bb now, I hooked in your kbuild stuff, but it doesn't seem to build dsplink.lib now
  • [12:11:20] <koen> the samples need that lib
  • [12:11:21] <Crofton> urg
  • [12:11:37] <koen> but afaik the samples aren't tied to a kernel version
  • [12:13:02] * Crofton needs to do a few things, take some percocet and go back to bed
  • [12:14:47] <koen> 4,5-epoxy-14-hydroxy-3-methoxy-17-methylmorphinan-6-one
  • [12:16:31] <kblin> that's not a IUPAC name, is it?
  • [12:17:52] <koen> it should be
  • [12:18:35] * Openfree (n=df@222.65.143.118) has joined #beagle
  • [12:19:05] <RogerMonk> koen - ok, can u send me the log from dsplink_1.60.bb build please?
  • [12:19:18] <RogerMonk> have you pushed these changes back to oe git?
  • [12:19:29] <RogerMonk> if so, I'll rebase and try myself
  • [12:22:57] * jkridner|work (n=a0321898@nat/ti/x-bb6631ae4cc0f54b) Quit (Remote closed the connection)
  • [12:36:58] * soman (n=somnath@61.16.248.242) has joined #beagle
  • [12:38:16] * soman (n=somnath@61.16.248.242) Quit (Remote closed the connection)
  • [12:38:20] <koen> RogerMonk: I've pushed the changes, http://dominion.thruhere.net/koen/OE/dsplink.log
  • [12:38:58] * abitos (n=nixgibts@dslb-084-057-160-005.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [12:49:40] <jkridner> koen: I think the one put in the flash needs to be signed, so the README.txt should say to flash the x-load.bin.ift.
  • [12:50:00] <jkridner> also, I believe that there should be multiple copies put into the flash (I forget the offset) just in case one of them is bad.
  • [12:50:21] <jkridner> anyone tried audio on 2.6.27?
  • [12:51:02] <koen> I think sakoman had the incantations for that somewhere
  • [12:51:06] * jkridner wonders what happened to his work PC and why he can no longer connect to it.
  • [12:52:19] <jkridner> koen: indeed. I'm just expecting with Link and SGX working in your kernel, and the need to update u-boot to get it to work, lots of people might be reading your README.txt soon.
  • [12:54:09] <jkridner> http://www.sakoman.net/omap3/flash%20procedure.txt does not include the right magic for the updated x-load.bin.ift flashing with redundancy.
  • [13:08:05] * [X]Spot (n=stancho@78.90.99.168) has joined #beagle
  • [13:08:59] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) Quit (Read error: 60 (Operation timed out))
  • [13:14:41] <koen> RogerMonk: FWIW, dsplink-module and ti-cmemk-module also build for omap3evm now :)
  • [13:18:44] * BThompson (n=BThompso@nat/ti/x-2d610458c6a9e8c4) has joined #beagle
  • [13:29:28] * fr3men (n=fr3men@ip-5-146.sn2.eutelia.it) Quit ("Leaving.")
  • [13:29:38] * fr3men (n=fr3men@ip-5-146.sn2.eutelia.it) has joined #beagle
  • [13:31:54] * FuL|OUT is now known as fulgas
  • [13:35:22] <koen> hmmm
  • [13:35:24] <koen> rc8 is out
  • [13:37:05] <RogerMonk> koen - great - I'm rebuilding after pulling latest HEAD - man I gotta get a faster machine - this rebuild is *way* too painful - even for just console...
  • [13:37:27] <Crofton> ,OE is really fast on quad
  • [13:37:35] <RogerMonk> koen - looks like the dsplink user library has not been built - will look at that
  • [13:37:57] <RogerMonk> Crofton - yeah - think I'm gonna have to get one - can't wait a whole day for each console image :)
  • [13:38:05] <Crofton> yeah
  • [13:38:13] <RogerMonk> (really hurting productivity)
  • [13:38:18] <Crofton> even the dual core is better
  • [13:38:29] <Crofton> dual core with || make etc is OK
  • [13:38:38] <RogerMonk> (I think compiling on beagle would be faster....)
  • [13:39:00] * cbrake_away is now known as cbrake
  • [13:39:03] <Crofton> I do some builds in a dual core, but not enable || amke etc, and that is apinful
  • [13:39:13] <SpeedEvil> Does beagle CPU have FPU?
  • [13:39:30] <Crofton> single precision SIMD unit
  • [13:39:35] <SpeedEvil> ah
  • [13:39:39] * gcohler (n=gcohler@nat/ti/x-2e961ae54c2f7a9b) has joined #beagle
  • [13:39:40] <SpeedEvil> thanks
  • [13:39:40] <Crofton> also there is double precision unit
  • [13:41:11] <koen> the VFP isn't pipelined, so stick to single precision, which the NEON can handle
  • [13:41:39] <Crofton> well, unless you need double precision :)
  • [13:41:55] * supo (n=supo@s-inf-pc117.oulu.fi) Quit (Read error: 54 (Connection reset by peer))
  • [13:41:59] <Crofton> and gcc sucks at code generation for NEON :(
  • [13:42:38] * tzhau__ (n=tzhau@41.247.182.142) Quit (Connection timed out)
  • [13:48:05] <geckosenator> so it has double precision but it's slower?
  • [13:48:10] <geckosenator> or is double precision software?
  • [13:49:00] <Crofton> there is hw doubel precision unit, but it is slower than the NEON unit
  • [13:49:06] <Crofton> yeah, it is confusing ....
  • [13:49:16] <geckosenator> not as much now that you explained it
  • [13:49:30] <geckosenator> can the hw double precision unit work in parallel with the neon unit?
  • [13:49:59] <Crofton> that depends on how the pipelining works
  • [13:50:06] <geckosenator> is there a hw single precision unit that isn't NEON? or can the hw double precision do single precision in parallel with neon?
  • [13:50:07] <Crofton> mru can usually answer those questions
  • [13:50:11] <geckosenator> heh, ok
  • [13:50:30] <Crofton> the vfp is the doube precisioin unit, it can also do single precision
  • [13:50:40] <Crofton> but the advice we have is just use NEON
  • [13:50:51] <geckosenator> well if you can use both at the same time
  • [13:51:04] * jsync (n=jess@59.160.172.220) has joined #beagle
  • [13:51:17] <Crofton> th evfp has a bad reputation :)
  • [13:51:26] <geckosenator> heh ok
  • [13:52:11] <koen> it's actually a vfp-lite
  • [13:52:35] <koen> cortex-a9 will have the heavy version again (like omap2 has)
  • [13:55:37] * bazbell (n=a0192809@nat/ti/x-79dfa0b95ed6bc80) has joined #beagle
  • [14:03:10] * bazbell (n=a0192809@nat/ti/x-79dfa0b95ed6bc80) Quit ("Leaving.")
  • [14:09:32] * tzhau__ (n=tzhau@41.247.182.142) has joined #beagle
  • [14:18:35] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) has joined #beagle
  • [14:19:48] * simplon (n=tom_wink@pc-lap02.nes.uni-klu.ac.at) has joined #beagle
  • [14:19:57] * simon__ (n=simon@89.238.65.10) has joined #beagle
  • [14:23:16] <simplon> hello. i've been evaluating beagle rev b6 for use in a academic research project. the evaluation turned out successful and we now plan to order 6 more beagles. before doing so - does anybody have some information when rev c will start to be available for order via digikey?
  • [14:24:01] <khasim> simplon: not till end of 1Q 09
  • [14:24:42] * prpplague (n=dave@mail.americanmicrosystems.com) has joined #beagle
  • [14:25:37] <khasim> Does anyone have an input on what validation should be run at factory for beagleboard and what should be the out of the box experience for the same
  • [14:26:27] <khasim> I am moving to latest u-boot for validation and having it flashed on board
  • [14:27:15] <jkridner> simplon: Rev C will likely be available for order in February.
  • [14:27:51] <khasim> this will include, Mans neon patches, works for angstrom, splash, tvout color bar,boot.scr, mmcinit, from sakoman's tree, NAND BB fixes
  • [14:28:33] <khasim> works for angstrom means validated for angstrom...
  • [14:28:51] <simplon> thank you for that information
  • [14:29:25] * simplon (n=tom_wink@pc-lap02.nes.uni-klu.ac.at) has left #beagle
  • [14:29:42] <PapaGrillo> after rev C comes out will there still be support for rev B4/5/6?
  • [14:30:07] <khasim> you mean support for hw ?
  • [14:30:10] <PapaGrillo> yes
  • [14:30:27] <PapaGrillo> like, if I am not mistaken the line in is not supported under linux
  • [14:30:33] <gcohler> khasim: OOB, I think it should come with Angstrom in NAND and boot up into Angstrom.
  • [14:31:12] <khasim> PapaGrillo: hw will be supported for sure
  • [14:31:16] * koen wonders whether uboot should have a 640x480 splash so the pico DLP works
  • [14:31:33] <khasim> PapaGrillo: software is what we develop here... @ beagleboard.org
  • [14:32:29] <khasim> PapaGrillo: line in patches were getting discussed dont know if we some one made it to any lists
  • [14:32:49] <PapaGrillo> I have not been able to find any
  • [14:33:24] <khasim> gcohler: but then some one might ask for android or debian or ubuntu :)
  • [14:33:38] <PapaGrillo> I am a newbie, where do you usually keep these patches?
  • [14:33:47] <PapaGrillo> I searched the mailing list
  • [14:33:49] <PapaGrillo> and google
  • [14:34:37] <khasim> PapaGrillo: I think you should look at sakoman's GIT tree, may be he has patches for line in, this should work for beagle as well
  • [14:35:14] * kevinsc (n=kevinsc@nat/ti/x-8c768b255973853e) has joined #beagle
  • [14:35:17] * kevinsc (n=kevinsc@nat/ti/x-8c768b255973853e) has left #beagle
  • [14:35:21] <Shivdas> Hi Khasim, did revision C will add any hardware to BB other than USB A port?
  • [14:35:24] * JuanG (n=Juan@nat/ti/x-ed60abf0a0d309d3) has joined #beagle
  • [14:35:34] * simplon (n=tom_wink@pc-lap02.nes.uni-klu.ac.at) has joined #beagle
  • [14:35:44] <khasim> PapaGrillo: I dont see the patch on linux omap vger, don't know if some one has it. will check with Anuj Aggarwal and get back
  • [14:36:11] * nemequ (n=nemequ@ip68-111-215-155.sd.sd.cox.net) has joined #beagle
  • [14:36:19] * JuanG (n=Juan@nat/ti/x-ed60abf0a0d309d3) has left #beagle
  • [14:36:20] <khasim> Shivdas: The LCD signals will be brought out, memory will be upgraded to 256MB
  • [14:37:08] <khasim> does gumstix give camera lines to plug a sensor?
  • [14:38:24] * khasim wants to see camera signals coming out on some board
  • [14:38:51] * florian too, USB sucks! :)
  • [14:39:00] <sakoman> PapaGrillo: http://marc.info/?l=linux-omap&m=122852440011193&w=2
  • [14:39:05] <Shivdas> Khasim: what do think, how much price increase will be in India for Rev C :)
  • [14:39:27] <sakoman> khasim: camera signals are brought out on a flex connector on Overo
  • [14:39:36] <khasim> Shivdas: Not sure..
  • [14:39:44] <sakoman> I believe Gordon finally shipped one to you earlier this week
  • [14:40:00] <Shivdas> khasim : ok Thanks....
  • [14:40:09] <khasim> sakoman: I just mailed Gordon about the shipping details.... :(
  • [14:40:22] <khasim> sakoman: haven't received one yet
  • [14:40:34] <AV500> khasim: what you want is an EVM, it has all signals :-)
  • [14:40:46] <khasim> Shivdas: we should also see if realtime can help us reducing the pricing for India
  • [14:41:02] <khasim> AV500: :) :)
  • [14:41:03] <sakoman> AV500: I bet khasim already has an evm :-)
  • [14:41:53] * khasim khasim has pandora, neuros, Beagle, Zoom, SDP,
  • [14:42:18] <khasim> I was not able to work more on pandora and neuros as promised
  • [14:42:32] <Shivdas> Khasim: what do u maen by "realtime" ?
  • [14:42:33] <khasim> will have to dedicate some time :(
  • [14:42:40] <PapaGrillo> thanks akoman
  • [14:42:56] <AV500> khasim: so there is an OMAP3 based neuros?
  • [14:43:05] <khasim> no it is davinci based
  • [14:43:11] <khasim> but I have access to the same
  • [14:43:15] * AV500 has ZOOM II!!
  • [14:43:24] <AV500> P
  • [14:43:26] <AV500> :-P
  • [14:44:13] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) has joined #beagle
  • [14:44:19] <khasim> No Zoom 2 in India yet
  • [14:44:24] <AV500> :-)
  • [14:44:33] <AV500> we have 2
  • [14:44:44] * florian wants one too
  • [14:44:46] * emeb (n=ericb@ip72-223-90-212.ph.ph.cox.net) has joined #beagle
  • [14:45:52] <AV500> florian: Siegen is not so far, come here and have a look
  • [14:46:45] <florian> AV500: oh... where are you located?
  • [14:46:51] <AV500> Darmstadt
  • [14:47:25] <florian> That's not that far indeed...
  • [14:47:50] <koen> about 150 km
  • [14:48:14] <florian> koen: shouldn't be more from you, right?
  • [14:48:31] <AV500> I'd invite you both to setup my BB :-)
  • [14:48:39] <florian> hehe
  • [14:49:27] * jkridner would like a board decoder ring at http://beagleboard.org/breeds
  • [14:49:47] <jkridner> if you go to the wiki linked by that page, you can find the link to 'realtime'.
  • [14:49:55] <koen> florian: about 370km to darmstadt
  • [14:50:08] <koen> siegen is ~225 km
  • [14:50:25] <khasim> Shivdas: http://www.realtimedsp.com.cn/product/detail.asp?ID=272
  • [14:50:46] <florian> koen: oh... more than expected.
  • [14:51:42] <AV500> jkridner: my chinese is bad
  • [14:52:18] <jkridner> it says "buy our board" ;)
  • [14:52:52] <AV500> yes, but how many firstborns do I have to pay?
  • [14:53:03] <koen> what's the difference between zoom1 and zoom2?
  • [14:53:20] <khasim> zoom2 has wide LCD
  • [14:53:22] <jkridner> big changes are TPS65930, rather than TPS65950, mono microphone, composite video (rather than S-Video), full DVI-D connector, USB host, MMC/SD-only connector
  • [14:53:33] <khasim> bluetooth, dont know beyond that
  • [14:53:42] <jkridner> er, my last comment was with regards to the "realtimedsp" board.
  • [14:54:01] <jkridner> AV500: I don't think they have broad availability yet (I haven't gotten a board).
  • [14:54:19] <AV500> I might think we are the 1st outside TI to have them
  • [14:54:28] <jkridner> AV500: I suspect they will be cheaper than Beagle thanks to the CUS package, but I don't know by how much.
  • [14:54:44] <AV500> I meant the zoom 2, not the realtime
  • [14:54:48] <jkridner> AV500: you mean the Zoom2, not ...
  • [14:54:49] <jkridner> :)
  • [14:55:18] <AV500> actually, it is not the final zoom 2, it misses it's clothes
  • [14:55:42] <AV500> naked PCB, pure engineer p0rn
  • [14:56:00] <koen> the emperor has no clothes
  • [14:56:22] <Shivdas> khasim : realtime board looks to much similar to BB, any comparision?
  • [14:56:51] <khasim> Shivdas: jkridner listed just above :)
  • [15:01:45] * simplon (n=tom_wink@pc-lap02.nes.uni-klu.ac.at) has left #beagle
  • [15:06:11] * simon__ (n=simon@89.238.65.10) Quit ("leaving")
  • [15:07:27] <jsync> khasim: can you provide a link to zoom2 ?
  • [15:07:30] * simon__ (n=simon@89.238.65.10) has joined #beagle
  • [15:07:57] * simon__ is now known as simon________
  • [15:08:17] * simon________ is now known as simon42
  • [15:10:49] <jkridner> koen: I'm told that the individual who was fulfilling the graphics requests on http://www.ti.com/omapgraphics left TI unexpectedly.
  • [15:11:02] <koen> heh
  • [15:11:10] <jkridner> someone new now has this responsibility, so I suggest you send the request again.
  • [15:11:21] <koen> another argument for putting in a download link like codec-engine
  • [15:11:23] <Crofton> hmmm
  • [15:11:55] <jkridner> others anxious to try the 3D graphics can request the Zoom binaries and try those (using koen's kernel build based on the Nokia sources).
  • [15:12:18] <AV500> jsync: I am not sure the zoom2 is "public" yet
  • [15:13:40] <khasim> jsync: I am not sure of the link
  • [15:13:41] <jsync> AV500: ok
  • [15:14:59] * JoeBorn__ (n=jborn@nmd.sbx02711.skokiil.wayport.net) has joined #beagle
  • [15:18:49] <koen> heh
  • [15:19:07] <koen> I think I put the NULL in the wrong place in my lpm patch
  • [15:19:46] <koen> wait
  • [15:19:51] <koen> I didn't patch lpm
  • [15:21:27] * jrmuizel (n=jrmuizel@CPE001f5be79d0f-CM0017ee62f8b0.cpe.net.cable.rogers.com) Quit ()
  • [15:22:02] <AV500> koen: lpm for the dsp?
  • [15:22:24] <AV500> koen: where can I see your dsplink/CE patches?
  • [15:23:01] <koen> AV500: they are all in OE
  • [15:23:49] <AV500> yes, but I am stupid
  • [15:23:59] <AV500> and I have no OE checked out
  • [15:26:10] <Crofton> gitweb.openembedded.net .....
  • [15:26:21] <Crofton> packages/dsplink
  • [15:26:51] <AV500> ok, thx
  • [15:27:15] * poussa (n=poussa@a91-154-110-228.elisa-laajakaista.fi) has joined #beagle
  • [15:28:15] * khasim my overo status shows THE PACKAGE WAS MISSORTED AT THE HUB. IT HAS BEEN REROUTED TO THE CORRECT DESTINATION SITE
  • [15:28:28] <khasim> :(
  • [15:33:17] * jsync (n=jess@59.160.172.220) has left #beagle
  • [15:34:11] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [15:34:35] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [15:36:53] <AV500> koen: now that you have dsplink/CE what will you run on the DSP?
  • [15:37:20] * sradhakrishna (n=rks@59.92.150.109) has joined #beagle
  • [15:42:09] * aanishn (n=aanishn@59.160.172.220) has left #beagle
  • [15:50:03] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [15:50:16] * JoeBorn__ (n=jborn@nmd.sbx02711.skokiil.wayport.net) Quit (Read error: 113 (No route to host))
  • [15:50:27] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [15:51:44] <sakoman> koen: latest linux-omap (rc8) breaks mmc, so you might not want to spend to much time on it yet
  • [15:53:47] * poussa__ (n=poussa@a91-154-110-228.elisa-laajakaista.fi) has joined #beagle
  • [15:53:48] * poussa (n=poussa@a91-154-110-228.elisa-laajakaista.fi) Quit (Read error: 104 (Connection reset by peer))
  • [15:54:28] <sradhakrishna> hi
  • [15:54:34] <sradhakrishna> need some help here.
  • [15:54:51] <sradhakrishna> i've recently bought a beagle, and am trying to boot it up.
  • [15:54:58] <sradhakrishna> but haven't been successful yet.
  • [15:55:56] <sradhakrishna> i've powered up the beagle through usb OTG. I do not have any other power source connected yet.
  • [15:56:56] <sradhakrishna> i've confirmed that the serial adapter to connect to the RS232 port has the right connections and so is the serial cable that connects my beagle to the serial port of the PC (Rx - 2, TX - 3, 5 - GND).
  • [15:58:34] <sradhakrishna> i use minicom on ubuntu, and have set the correct recommended settings.
  • [15:58:54] <sradhakrishna> i hold the user switch as I connect the USB connecter.
  • [15:59:13] <sradhakrishna> i am just not able to get anything on the minicom screen.
  • [15:59:25] <sradhakrishna> Can someone please help?
  • [16:01:14] <kulve> http://elinux.org/BeagleBoardFAQ#Serial_connection_.231
  • [16:02:54] * Openfree (n=df@222.65.143.118) Quit (Connection timed out)
  • [16:04:02] <sradhakrishna> Thanks kulve!
  • [16:04:25] <sradhakrishna> my case seems to be the one described in Serial connection #3.
  • [16:04:57] <sradhakrishna> DTR wrapped back to DSR - can you give some pointers about how i could do that?
  • [16:05:04] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) Quit (Read error: 60 (Operation timed out))
  • [16:20:16] <koen> sakoman: I was thinking about switching the 2.6.27 recipe to the omap-pm branch
  • [16:20:29] <koen> to has dsp, xv, sgx and pm
  • [16:20:52] <Crofton> +1
  • [16:20:55] <Crofton> i it works :)
  • [16:20:58] <Crofton> if
  • [16:22:06] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) has joined #beagle
  • [16:22:41] <sakoman> koen: where is omap-pm?
  • [16:23:37] <koen> http://git.kernel.org/?p=linux/kernel/git/khilman/linux-omap-pm.git;a=summary
  • [16:25:17] <koen> pm-prev is what you want for .27
  • [16:25:32] <koen> it seems kevin is tracking .28rc now with 'pm'
  • [16:28:11] <sakoman> koen: I'll watch and see how your experiment works :-)
  • [16:28:56] <Crofton> we need a way to add overrides so we can switch source based on a flag :)
  • [16:29:01] <sakoman> Just keeping l-o in a working state has been excitement enough for me
  • [16:29:16] <sakoman> Not sure I want to jump onto a development branch
  • [16:29:27] <Crofton> so we can chose between linux-omap, and linux-omap with pm
  • [16:29:36] <Crofton> linch
  • [16:31:05] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has joined #beagle
  • [16:33:36] <koen> sakoman: I moved beagle to .27 today
  • [16:33:46] <koen> sakoman: I wonder how .28 final will look like
  • [16:34:20] <koen> I glanced at http://kernelnewbies.org/Linux_2_6_28 today
  • [16:35:14] <koen> If I knew how to code and there were 37 hours in a day I'd attempt to clean up the sgx driver
  • [16:36:32] <kulve> koen: :)
  • [16:36:56] <atin_> hmm, the u-boot-omap3beagle_1.1.4.bb recipe calls for http://www.sakoman.net/omap3/u-boot.tar.gz but I can't actually see that file in the browser?
  • [16:37:03] <suihkulokki> koen: ..and had docs and specs? :P
  • [16:37:31] <koen> suihkulokki: if I can put 37 hours in a day I can code without specs :)
  • [16:37:50] <sakoman> koen: I've been living on 2.6.28 for a few weeks now and it has been relatively painless
  • [16:37:51] * suihkulokki is still not sure if dspbridge or sgx driver is worse
  • [16:38:00] <sakoman> till yesterday when mmc broke
  • [16:38:13] <koen> sakoman: I'm tracking .28 on my evm
  • [16:38:41] <sakoman> atin_: that recipe should be removed. no one should be using u-boot 1.1.4
  • [16:39:02] <atin_> ok, what is the recipe that is used by the beagle for u-boot?
  • [16:39:03] <sakoman> you wouldn't be happy with the results!
  • [16:39:04] * koen needs to test a current uboot on evm
  • [16:39:37] <sakoman> atin_: are you using oe.dev tree?
  • [16:40:12] <atin_> I used whatever http://elinux.org/BeagleBoardAndOpenEmbeddedGit told me to
  • [16:40:25] <koen> sakoman: the openvz dudes are looking into making it work with SLAB so it can run properly on omap3
  • [16:40:31] <atin_> not sure if that is the oe.dev tree
  • [16:40:43] <sakoman> atin_: pretty sure it is
  • [16:40:51] <koen> 'bitbake u-boot' will build something that works
  • [16:41:02] <sakoman> I *think* you would 'bitbake u-boot-omap3'
  • [16:41:32] <koen> iirc I put the stuff from u-boot-omap3 into u-boot_git.bb
  • [16:41:32] <sakoman> atin_: listen to koen :-)
  • [16:42:15] <atin_> ok, yes - I run bitbake u-boot actually, but now I want to actually muck in the sources and so wanted the 'latest' working sources
  • [16:42:50] <sakoman> atin_: koen is good about keeping up with the latest
  • [16:43:10] <koen> or fall back to 'working' :)
  • [16:43:13] <atin_> btw, did gcc/gcc-package-cross.inc break for anyone last night? Mine is still broken, so I can't run bitbake anymore - r17
  • [16:43:26] <atin_> until I went and undid the change that was made to it
  • [16:44:22] <koen> it broke and then I fixed it
  • [16:44:37] <atin_> currdir="$PWD"?
  • [16:45:22] <koen> yes
  • [16:45:40] <atin_> ok, guess I can remove my change then
  • [16:45:41] <koen> the revision that broke had spaces around the '='
  • [16:46:13] <atin_> ok - I was trying to figure out what was wrong with that line, finally gave up and went back the the full pathname version of ln -sf
  • [16:46:59] <koen> shell doesn't like '$foo = bar'
  • [16:47:15] * koen always gets that wrong
  • [16:47:30] <koen> but my miracle it wasn;t actually me messing up this time :)
  • [16:48:26] <atin_> :)
  • [16:48:39] * sradhakrishna (n=rks@59.92.150.109) has left #beagle
  • [16:49:24] * koen is currently trying to design and rpath-like builder for angstrom
  • [16:52:24] * dirk2 (n=dirk@p5B042F1F.dip0.t-ipconnect.de) has joined #beagle
  • [16:53:55] <florian> koen: That's a pretty good idea...
  • [17:04:07] * tulpe (n=ask@p54AF6EE5.dip.t-dialin.net) has left #beagle
  • [17:04:10] * tulpe (n=ask@p54AF6EE5.dip.t-dialin.net) has joined #beagle
  • [17:05:06] * khasim (n=a0393720@192.163.20.231) has joined #beagle
  • [17:05:53] * RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) has joined #Beagle
  • [17:05:55] * abitos (n=nixgibts@141.58.49.86) has joined #beagle
  • [17:06:44] * fr3men (n=fr3men@ip-5-146.sn2.eutelia.it) has left #beagle
  • [17:09:05] <dirk2> khasim: ping
  • [17:09:11] <dirk2> sakoman: pong
  • [17:09:24] <dirk2> sakoman: or ping ;)
  • [17:09:33] <sakoman> pong
  • [17:10:17] <dirk2> sakoman: Above, in the log, you mention Overo's camera connector.
  • [17:10:36] <sakoman> I did :-)
  • [17:10:48] <dirk2> sakoman: I remember a question from MAV guys if anybody already used it.
  • [17:11:42] <sakoman> not yet - there is a camera vendor that is working with gumstix but I don't think they have their proto ready yet
  • [17:12:09] <dirk2> k. if there are any news, keep us updated
  • [17:12:34] <sakoman> I'm sure gumstix will make a big fuss when it is ready ;-)
  • [17:13:51] <khasim> dirk2: pong
  • [17:14:34] <sakoman> dirk2, khasim: as far as I can tell none of the patches that have been discussed via email are yet ready to apply. correct?
  • [17:15:19] <dirk2> khasim: Great! Thanks for your U-Boot fix. Because I have several mails in my inbox for this topic: http://pastebin.com/d5b70c8c9 is the final patch?
  • [17:15:21] <khasim> sakoman: you mean the u-boot NAND BB?
  • [17:16:09] <khasim> dirk2, sakoman: this http://pastebin.com/d5b70c8c9 is the latest patch
  • [17:16:15] <khasim> it works for hw and sw ecc
  • [17:16:36] <sakoman> OK, so it should be applied?
  • [17:17:08] <khasim> sakoman: yes
  • [17:17:26] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) Quit ()
  • [17:17:34] <khasim> sakoman: what is your board validation procedure
  • [17:17:39] <dirk2> sakoman: Mainly yes, but I'd like to ask some questions ;)
  • [17:17:58] * Stskeepz (n=chobits@84.238.11.16) has joined #beagle
  • [17:18:04] * Stskeeps (n=chobits@84.238.11.16) Quit ("Reconnecting")
  • [17:18:22] <dirk2> khasim: two questions:
  • [17:18:29] <khasim> dirk2: yes
  • [17:18:37] <sakoman> khasim: not sure what your question refers to. my personal tests or gumstix production tests?
  • [17:18:57] <dirk2> khasim: I don't know what the flags are doing, but why can we remove the flags #
  • [17:18:57] <dirk2> NAND_NO_PADDING | NAND_CACHEPRG | NAND_NO_AUTOINCR |
  • [17:18:57] <dirk2> NAND_NO_AUTOINCR; ?
  • [17:18:57] <khasim> sakoman: gumstix production tests
  • [17:20:05] <khasim> dirk2: you mean why did I remove all these?
  • [17:20:07] * ceyusa (n=ceyusa@cm216016.red83-165.mundo-r.com) Quit ("Ex-Chat")
  • [17:20:26] <dirk2> khasim: and second question: Would it be a good idea to disable (unset) NAND_OWN_BUFFERS after we called nand_scan_tail() again?
  • [17:20:41] <dirk2> khasim: Yes, why did you remove the flags?
  • [17:21:00] <sakoman> the production tests involve booting from a microSD card, running a boot.scr that writes 4 copies of x-load to nand and a default u-boot environement
  • [17:21:34] <khasim> dirk2: for second question I have to test it
  • [17:21:45] <khasim> dirk2: for first question, again I have to test it
  • [17:22:07] * Stskeepz is now known as Stskeeps
  • [17:22:11] * Stskeeps (n=chobits@84.238.11.16) Quit (Client Quit)
  • [17:22:13] * Stskeeps (n=chobits@84.238.11.16) has joined #beagle
  • [17:22:13] <khasim> dirk2: actually the comment on first question mentioned to reset the BB table but it was doing some thing else
  • [17:22:33] <sakoman> then booting to a linux rootfs and running a shell script to write uboot, uImage, and rootfs to nand. Video output, usb, etc are also checked at this time
  • [17:24:01] <dirk2> khasim: Yes, the comment might be wrong ;)
  • [17:24:02] <khasim> dirk2: /* Switch back to the original value, mark me unscanned */
  • [17:24:18] <khasim> dirk2: sorry, I am marking it as scanned.
  • [17:24:53] <khasim> dirk2: I think the chain is broken some where,
  • [17:25:11] <khasim> dirk2: what I have done here might be like - * - = +
  • [17:25:58] <khasim> dirk2: after nand_release some one should have updated the bbt again
  • [17:26:05] <khasim> dirk2: but I dont find the call again
  • [17:26:24] <khasim> dirk2: now we don't release the buffers and don't scan again
  • [17:26:51] <khasim> dirk2: actually speaking we dont have to scan again and again as the bbt remains the same between hwecc and swecc
  • [17:27:00] <dirk2> khasim: Yes, this looks fine :)
  • [17:27:39] * uwe_ (n=uwe_@dslb-084-056-037-048.pools.arcor-ip.net) Quit (Read error: 60 (Operation timed out))
  • [17:27:53] <khasim> sakoman: do you have svideo out?
  • [17:27:59] <sakoman> no
  • [17:28:22] <khasim> sakoman: what version of kernel do you use for these?
  • [17:28:27] <dirk2> khasim: I only want to be on the save side: If we unset NAND_OWN_BUFFERS before leaving omap_nand_switch_ecc() this can't do anything worse later
  • [17:28:33] <sakoman> analog video is dead, right? :-)
  • [17:28:51] <khasim> sakoman: how do you validate USB HOST
  • [17:28:52] <sakoman> khasim: current shipping kernel is 2.6.27
  • [17:29:01] <khasim> dirk2: I can validate this tomorrow
  • [17:29:05] <sakoman> khasim: we don't
  • [17:29:19] <khasim> dirk2: left board at office today :(
  • [17:29:28] <sakoman> no working sw yet, so it is called "experimental" in the product spec
  • [17:30:14] <sakoman> dirk2: so it sounds like I should hold off on applying this patch?
  • [17:30:52] <dirk2> sakoman: Wait some minutes, I talk with scottwood at #u-boot
  • [17:31:24] <dirk2> sakoman: But it should be okay to apply them if it works for khasim. If there are any issues, we can fix later.
  • [17:31:33] * uwe__ (n=uwe@dslb-084-056-006-227.pools.arcor-ip.net) has joined #beagle
  • [17:32:25] <khasim> sakoman: I have to fix a kernel now to validate REV C USB Host and complete validation with in few seconds in factory
  • [17:33:19] <khasim> sakoman: want to go on latest GIT kernel, but will need to fix S-Video and USB host tests.
  • [17:35:05] <khasim> will have to find a appropriate kernel and port all the validation s/w :)
  • [17:35:28] <sakoman> khasim: have you been able to get ehci working with 2.6.28
  • [17:36:13] <khasim> sakoman: I checked with Anand today, he said the USB Driver is good, but it is clock framework that is causing the issue
  • [17:36:39] <khasim> instead of clk_enable if we write directly to clock registers then it will work fine I heard
  • [17:36:47] <khasim> I haven't validated my self
  • [17:37:12] <sakoman> yes, we're discussing that on l-o mailing list now
  • [17:38:24] <khasim> doesn't paul have access to beagle
  • [17:40:18] * abitos (n=nixgibts@141.58.49.86) Quit (Read error: 104 (Connection reset by peer))
  • [17:40:42] <khasim> sorry, beagle doesnt have EHCI
  • [17:41:32] * paul_pwsan (n=paul@72.9.107.142) has joined #beagle
  • [17:41:36] <koen> heh
  • [17:41:39] <koen> speaking of the devil
  • [17:41:43] <koen> paul_pwsan: welcome!
  • [17:41:47] <khasim> :)
  • [17:41:48] <paul_pwsan> koen: thanks :-)
  • [17:42:05] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [17:42:28] * uwe2 (n=uwe@dslb-084-056-037-048.pools.arcor-ip.net) Quit (Read error: 110 (Connection timed out))
  • [17:42:28] <paul_pwsan> sakoman, sakoman_: if that debug patch is reverted, it enters an infinite loop?
  • [17:42:40] <sakoman> paul_pwsan: yes
  • [17:42:46] <paul_pwsan> weird
  • [17:42:51] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [17:43:18] <paul_pwsan> so if you plug in a device now, is the device enumerated?
  • [17:43:30] <sakoman> no :-(
  • [17:43:46] <paul_pwsan> doh
  • [17:43:49] <sakoman> still get the auto suspend
  • [17:45:47] <sakoman> paul_pwsan: wish I knew usb internals
  • [17:46:42] <paul_pwsan> sakoman: sometimes i wish i knew them too, but then i think, well, i'd probably get stuck debugging musb ;-)
  • [17:46:50] <sakoman> :-
  • [17:47:58] <Crofton> rofl
  • [17:48:55] <khasim> good night all
  • [17:49:01] <paul_pwsan> night khasim
  • [17:49:02] <khasim> see you tomorrow
  • [17:49:07] <Crofton> gn
  • [17:49:43] <sakoman> paul_pwsan: did that debug info help at all?
  • [17:50:28] <paul_pwsan> sakoman: definitely, but now have to figure out how just adding the debug code would affect the behavior of that function
  • [17:51:04] <paul_pwsan> sakoman: dpll5 seems to be programmed correctly - i assume by the bootloader
  • [17:51:21] <sakoman> I will remove it and rebuild just to make sure, but it has been broken (infinite loop) for ages
  • [17:52:02] * florian -> home, bbbl
  • [17:52:20] <sakoman> paul_pwsan: send me your address and I'll try to get the gumstix folks to send you some hardware so you have an omap ehci machine
  • [17:52:31] <paul_pwsan> sakoman: k thx, will do
  • [17:54:04] <sakoman> I'm rebuilding now without the debug patch just to reverify the infinite loop
  • [17:55:06] <dirk2> khasim: I will send a mail with a proposal for an updated patch. Would be quite nice if you could test.
  • [17:59:01] * khasim (n=a0393720@192.163.20.231) Quit (Remote closed the connection)
  • [18:00:00] * florian (n=fuchs@217.146.132.69) Quit ("Client exiting")
  • [18:00:25] * atin_ (n=atin@c-71-232-7-71.hsd1.ma.comcast.net) has joined #beagle
  • [18:01:36] * _apk (n=kows@85-18-136-98.fastres.net) has joined #beagle
  • [18:08:18] <paul_pwsan> sakoman: has EHCI ever enumerated devices? or has it always wound up in auto-suspend if it makes it out of the infinite loop?
  • [18:08:53] <sakoman> paul_pwsan: back in the 2.6.26 timeframe it would enumerate
  • [18:09:12] <paul_pwsan> k
  • [18:10:17] <sakoman> I recall that it broke right around the time that I was preparing the release for the Linux Kernel Summit attendee gifts
  • [18:12:08] * fraz_ (n=fraz@host143186050011.borland.com) has left #beagle
  • [18:12:24] <RogerMonk|linux> koen - I see the same error - looking now - http://tinderbox.openembedded.net/public/logs/2508102.txt
  • [18:12:52] * uwe_ (n=uwe_@dslb-084-056-006-227.pools.arcor-ip.net) has joined #beagle
  • [18:14:39] <koen> RogerMonk|linux: I know why it happens (commenting a line in your makefile and using your kbuild makefile), but I don't know how to build dsplink.lib without it trying to build the kernel module
  • [18:14:59] <paul_pwsan> sakoman: ok. this ehci-omap.c driver needs some patching.
  • [18:15:36] <RogerMonk> koen - yep, just seen it too - will get you a patch
  • [18:16:01] <paul_pwsan> sakoman: what HF clock freq are you using on Overo? ehci-omap.c assumes 13MHz
  • [18:18:45] <sakoman> paul_pwsan: don't know -- is that something I can determine from the schematic?
  • [18:19:35] <sakoman> paul_pwsan: hfclkin is 26 Mhz
  • [18:20:11] <paul_pwsan> sakoman: ok, thx
  • [18:21:47] <sakoman> paul_pwsan: ah, I see the section of code you are referring to
  • [18:22:42] <paul_pwsan> sakoman: the SDP here is using a 26MHz HF clk also; i think this code is referring to the divided rate
  • [18:27:37] <atin_> is there any web page where the procedure to modify sources to one of the packages and then build the package within openembedded is shown?
  • [18:28:44] <atin_> I'm trying to modify u-boot, but haven't figured out how to take sakoman's git repository and muck with it on my machine and build it
  • [18:28:59] * robtow (n=rtow@64.62.142.114) has joined #beagle
  • [18:29:24] * cringthis (n=cringthi@nat/ti/x-a49a783f6a590370) has joined #beagle
  • [18:29:48] <paul_pwsan> sakoman: time to get some food, but will hack on this a little bit when i return
  • [18:30:14] <sakoman> paul_pwsan: thanks! let me know if you need me to test anything
  • [18:30:20] <paul_pwsan> cool
  • [18:32:21] * PapaGrillo (n=resis@72.20.147.88) Quit (Read error: 110 (Connection timed out))
  • [18:35:34] * dcordes (n=dcordes_@unaffiliated/dcordes) has joined #beagle
  • [18:36:00] <dcordes> koen, the armv6-novp images are significantly faster than the old ones on the kaiser
  • [18:38:37] <atin_> I'm just plain missing something. the oe.dev system uses sakoman's u-boot git repository (or is it the one on denx.de?). I have cloned sakoman's repository on my machine, but don't know how to bitbake u-boot and have it use my cloned repository instead ...
  • [18:42:16] <atin_> I'm going to get mad and export my repository and modify the .bb file to use that instead ;)
  • [18:44:33] <koen> dcordes: good to hear!
  • [18:48:25] <sakoman> atin_: create a diff of your changes using git diff
  • [18:48:42] <sakoman> add that as a patch to the oe recipe for u-boot
  • [18:48:56] <atin_> is the recipe u-boot_git.bb?
  • [18:49:18] <sakoman> or you can export your git and modify the recipe to use that. either method will work
  • [18:49:28] <sakoman> yes
  • [18:49:42] <koen> hmmm
  • [18:49:56] <sakoman> unless koen told a fib :-)
  • [18:50:00] <koen> dhl seems to work like log(b)
  • [18:50:22] <koen> it can do the first 4000km in 8 hours, but the final 150 take 2 days
  • [18:51:24] * ldesnogu_ (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) has joined #beagle
  • [18:55:54] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) has joined #beagle
  • [18:56:55] * Strontium (n=Strontiu@118.101.106.2) Quit ("Ex-Chat")
  • [18:57:45] * chelli (n=chelli@p54B86B39.dip.t-dialin.net) has joined #beagle
  • [19:01:10] <ds2> ewwww DHL
  • [19:01:24] <ds2> the carrier that lost my package for 4 months
  • [19:01:51] * Beagle2 (n=Beagle2@brln-4dbc4b02.pool.einsundeins.de) has joined #beagle
  • [19:02:17] <Beagle2> koen: same here. My pico is in utrecht too since two days... :-(
  • [19:04:10] * Beagle2 (n=Beagle2@brln-4dbc4b02.pool.einsundeins.de) Quit (Client Quit)
  • [19:05:50] <prpplague> koen: ping
  • [19:09:41] * cringthis (n=cringthi@nat/ti/x-a49a783f6a590370) Quit (Remote closed the connection)
  • [19:11:05] * dirk2 (n=dirk@p5B042F1F.dip0.t-ipconnect.de) has left #beagle
  • [19:14:14] * jimt_ is now known as jimt
  • [19:20:18] * florian (n=fuchs@f048225164.adsl.alicedsl.de) has joined #beagle
  • [19:20:59] <florian> re
  • [19:36:42] * robtow (n=rtow@64.62.142.114) Quit ("Leaving.")
  • [19:39:50] * valhalla (n=valhalla@81-174-21-31.dynamic.ngi.it) Quit ("Leaving")
  • [19:40:11] <RobotGuy> Crofton: I'm interested in what you are doing with SDRs and Beagle.
  • [19:51:28] * gregoiregentil (n=zonbu@adsl-71-135-114-242.dsl.pltn13.pacbell.net) has joined #beagle
  • [20:20:40] <atin_> koen: ping? can I change SRC_URI in u-boot_git.bb to my own "git://thor/u-boot.git;protocol=git" and expect bitbake u-boot to start using my git repository?
  • [20:20:59] <atin_> and SRC_URI_beagleboard also
  • [20:21:06] <atin_> in fact, which should I change? :)
  • [20:23:14] * dcordes (n=dcordes_@unaffiliated/dcordes) Quit (Read error: 113 (No route to host))
  • [20:23:16] <atin_> I know I can clone git://thor/u-boot.git by hand, so I know I am making the repository visible. but it doesn't seem like it is working ... it says "prefered version git of u-boot not available (for item u-boot"
  • [20:23:45] * dcordes (n=dcordes_@unaffiliated/dcordes) has joined #beagle
  • [20:24:07] <atin_> I'm suddenly longing for the days when I could just call "make" and that was that! ;)
  • [20:25:57] <Crofton> try it :)
  • [20:25:59] <Crofton> it should work
  • [20:28:31] * gregoiregentil (n=zonbu@adsl-71-135-114-242.dsl.pltn13.pacbell.net) has left #beagle
  • [20:28:41] <atin_> not sure what "prefered version git of u-boot not available" means ... I don't think it is building it .. it just says "462 tasks of which 462 didn't need to be rerun" and ends happily
  • [20:28:48] <atin_> but I have no .bin image :)
  • [20:29:53] <atin_> nothing under tmp/work/beagle.../ related to u-boot either.
  • [20:30:16] <atin_> I am missing something basic here - you guys all do this!
  • [20:31:13] <atin_> that is, have your own repositories you are building rather than the 'official' ones.
  • [20:35:53] * jkridner|work (n=a0321898@nat/ti/x-52ed66b6d59542bb) has joined #beagle
  • [20:38:35] * Xenion (n=robert@p579FC1D0.dip.t-dialin.net) has joined #beagle
  • [20:45:08] * bazbell (n=a0192809@nat/ti/x-8ae9642d0a6e2273) has joined #beagle
  • [20:45:24] * primer1 (n=test@c-67-170-235-15.hsd1.ca.comcast.net) has joined #beagle
  • [20:45:34] * bazbell (n=a0192809@nat/ti/x-8ae9642d0a6e2273) Quit (Client Quit)
  • [20:47:32] <jkridner|work> koen: have you tried g_ether with this 2.6.27 kernel? I'm trying to get a network connection to copy some more files over.
  • [20:47:44] <jkridner|work> guess I'll power down and use SD.
  • [20:58:28] * BThompson (n=BThompso@nat/ti/x-2d610458c6a9e8c4) Quit ("Trillian (http://www.ceruleanstudios.com")
  • [21:11:27] * robtow (n=rtow@nat/montavista/x-1f33c1d3d049d40d) has joined #beagle
  • [21:13:18] * robtow1 (n=rtow@nat/montavista/x-c92a69291d2faabe) has joined #beagle
  • [21:19:42] * robtow2 (n=rtow@nat/montavista/x-d7fb5a7f98565468) has joined #beagle
  • [21:21:11] * robtow3 (n=rtow@32.153.191.33) has joined #beagle
  • [21:23:54] * robtow3 (n=rtow@32.153.191.33) Quit (Remote closed the connection)
  • [21:24:25] * robtow1 (n=rtow@nat/montavista/x-c92a69291d2faabe) Quit (Read error: 104 (Connection reset by peer))
  • [21:24:31] * robtow1 (n=rtow@nat/montavista/x-cf569e4fbcfcaa10) has joined #beagle
  • [21:24:57] * robtow2 (n=rtow@nat/montavista/x-d7fb5a7f98565468) Quit (Read error: 104 (Connection reset by peer))
  • [21:24:59] * robtow1 (n=rtow@nat/montavista/x-cf569e4fbcfcaa10) Quit (Read error: 54 (Connection reset by peer))
  • [21:25:01] * robtow1 (n=rtow@nat/montavista/x-ec20fb6455961548) has joined #beagle
  • [21:26:23] * simplon (n=tom_wink@chello080109226022.2.klafu.surfer.at) has joined #beagle
  • [21:27:18] * robtow1 (n=rtow@nat/montavista/x-ec20fb6455961548) Quit (Read error: 104 (Connection reset by peer))
  • [21:28:18] * robtow1 (n=rtow@nat/montavista/x-d9497776370a260b) has joined #beagle
  • [21:30:53] <RogerMonk> koen - sending you updated dsplink recipe including usr lib build - message sample runs ok :)
  • [21:31:22] * robtow (n=rtow@nat/montavista/x-1f33c1d3d049d40d) Quit (Read error: 110 (Connection timed out))
  • [21:33:47] * robtow (n=rtow@32.153.108.122) has joined #beagle
  • [21:34:09] * ssvb (n=ssvb___@a88-114-221-132.elisa-laajakaista.fi) has joined #beagle
  • [21:38:40] * RogerMonk|linux (n=rmonkloc@host217-36-23-194.in-addr.btopenworld.com) Quit (Read error: 110 (Connection timed out))
  • [21:40:32] * RogerMonk (n=a0740758@nat/ti/x-3eaabf38f1616dd2) has left #beagle
  • [21:48:04] * robtow (n=rtow@32.153.108.122) Quit (Remote closed the connection)
  • [21:49:13] * robtow (n=rtow@nat/montavista/x-436a5ee773a13787) has joined #beagle
  • [21:50:32] * robtow1 (n=rtow@nat/montavista/x-d9497776370a260b) Quit (Read error: 110 (Connection timed out))
  • [21:54:36] * poussa__ (n=poussa@a91-154-110-228.elisa-laajakaista.fi) Quit (Read error: 110 (Connection timed out))
  • [21:54:54] <atin_> dang! ...local overlays!
  • [21:56:37] * RobotGuy is now known as RobotGuy-AFK
  • [21:56:56] * RobotGuy-AFK is now known as RobotGuy-OUT
  • [22:00:16] <geckosenator> I got hdmi->vga adapter today
  • [22:03:02] * felipec (n=felipec@a91-153-251-222.elisa-laajakaista.fi) has joined #beagle
  • [22:04:20] <felipec> jkridner: ping
  • [22:04:31] <jkridner|work> pong
  • [22:06:24] * Xenion (n=robert@p579FC1D0.dip.t-dialin.net) Quit ("Verlassend")
  • [22:07:19] <felipec> jkridner|work: yesterday I pushed a demo of DSP video decoding on the beagleboard
  • [22:07:26] <jkridner|work> aside: ugh, my PC won't read the FAT partition on my SD card so I have no way to copy the SGX code over to the board.
  • [22:07:43] * jkridner|work went into a meeting.
  • [22:07:51] <felipec> jkridner|work: http://www.youtube.com/watch?v=RPMldYRTH6I
  • [22:08:26] <felipec> I'm pushing another one right now, I would like to know which one you prefer
  • [22:11:04] * chelli (n=chelli@debian/developer/tschmidt) Quit ("IRC is just multiplayer notepad")
  • [22:21:55] <jkridner|work> I like the CPU load shot.
  • [22:22:04] <jkridner|work> is it ever windowed?
  • [22:22:11] * RobotGuy-OUT is now known as RobotGuy
  • [22:22:16] * RobotGuy is now known as RobotGuy-AFK
  • [22:22:29] <felipec> jkridner: what is ever windowed?
  • [22:22:41] * RobotGuy-AFK is now known as RobotGuy
  • [22:23:49] * alecrim_ (n=alecrim@189.2.128.130) has joined #beagle
  • [22:23:50] * alecrim (n=alecrim@189.2.128.130) Quit (Read error: 104 (Connection reset by peer))
  • [22:24:41] * likewise (n=likewise@82-171-51-231.ip.telfort.nl) Quit ()
  • [22:25:26] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [22:25:58] * simplon (n=tom_wink@chello080109226022.2.klafu.surfer.at) Quit (Read error: 110 (Connection timed out))
  • [22:26:43] <RobotGuy> Crofton: I don't have a Beagle yet.
  • [22:27:43] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) has joined #beagle
  • [22:28:57] <felipec> if you are talking about the video, then no, I don't have X
  • [22:30:41] * ldesnogu_ (n=ldesnogu@ven06-2-82-247-86-183.fbx.proxad.net) Quit ()
  • [22:33:14] * [X]Spot is now known as Stancho
  • [22:33:26] * Stancho is now known as [X]Spot
  • [22:34:21] * _bernie (n=bernie@trinity.develer.com) has left #beagle
  • [22:34:39] * alecrim_ (n=alecrim@189.2.128.130) Quit (Remote closed the connection)
  • [22:35:58] * gcohler (n=gcohler@nat/ti/x-2e961ae54c2f7a9b) Quit (Remote closed the connection)
  • [22:38:48] * fulgas is now known as FuL|OUT
  • [22:38:51] * FuL|OUT is now known as fulgas
  • [22:43:58] <geckosenator> anyone use svideo?
  • [22:44:33] * abitos (n=nixgibts@dslb-084-057-160-005.pools.arcor-ip.net) has joined #beagle
  • [22:52:17] <geckosenator> anyone get: An error ocurred, return value: 1074017580.
  • [22:52:21] <geckosenator> when running opkg install
  • [22:58:11] * RobotGuy (n=robotguy@pool-96-225-210-142.ptldor.fios.verizon.net) Quit (Read error: 104 (Connection reset by peer))
  • [23:12:46] * ZeZu (n=null@c-98-227-56-17.hsd1.in.comcast.net) has left #beagle
  • [23:13:37] * geckosenator (n=sean@c-24-8-193-190.hsd1.co.comcast.net) Quit (Read error: 60 (Operation timed out))
  • [23:19:45] * prpplague (n=dave@mail.americanmicrosystems.com) Quit ("Leaving")
  • [23:22:18] * BThompson (n=BThompso@cpe-76-185-93-11.tx.res.rr.com) has joined #beagle
  • [23:22:54] * rsalveti (n=salveti@200.184.118.130) Quit (Remote closed the connection)
  • [23:22:57] <felipec> jkridner|work: the second one finally is ready: hhttp://www.youtube.com/watch?v=EH4ZSpehNQw
  • [23:28:16] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) Quit ()
  • [23:29:13] * jrmuizel (n=jrmuizel@mozca02.ca.mozilla.com) has joined #beagle
  • [23:30:44] * robtow1 (n=rtow@nat/montavista/x-8d69ef9bccf0ae6c) has joined #beagle
  • [23:31:10] * Beagle8 (n=Beagle8@189.157.132.46) has joined #beagle
  • [23:31:38] * Beagle8 (n=Beagle8@189.157.132.46) Quit (Client Quit)
  • [23:31:41] * Beagle9 (i=BeagleUs@189.157.132.46) has joined #beagle
  • [23:31:48] <TehUni> felipec: wow, nice..
  • [23:31:51] <TehUni> what res is that?
  • [23:32:07] <felipec> TehUni: 720x400
  • [23:32:21] <Beagle9> Any one from Mexico?
  • [23:32:35] <TehUni> felipec: mpeg4?
  • [23:32:55] <felipec> TehUni: yup, 24 fps
  • [23:33:06] <felipec> Beagle9: me, but living in Finland
  • [23:33:08] <TehUni> felipec: nice. any luck with h264?
  • [23:34:12] <felipec> TehUni: yeah, it works fine too, but TI has't provided the socket node in the public release
  • [23:34:30] <TehUni> felipec: think it's capable of full 720p h264?
  • [23:35:47] <felipec> TehUni: yeah, I believe it's capable of 720p with H.264, but I haven't seen that, the best I've seen is D1 at 50 fps
  • [23:36:01] <TehUni> D1 ?
  • [23:36:23] <felipec> TehUni: PAL | NTSC
  • [23:36:35] <TehUni> ah, i see
  • [23:36:38] * Beagle9 (i=BeagleUs@189.157.132.46) Quit (Client Quit)
  • [23:36:50] <TehUni> beagleboard as mediacenter would be a dream come true
  • [23:36:58] <TehUni> probably pushing it though
  • [23:38:15] <felipec> TehUni: yeap, here at Nokia we are devloping Rygel, that might help towards that
  • [23:38:19] <felipec> http://zee-nix.blogspot.com/2008/10/rygel-gnome-upnp-media-server.html
  • [23:39:55] <TehUni> felipec: i was looking at more like an xbmc port + nfs
  • [23:43:26] * robtow (n=rtow@nat/montavista/x-436a5ee773a13787) Quit (Read error: 110 (Connection timed out))
  • [23:43:38] * abitos (n=nixgibts@dslb-084-057-160-005.pools.arcor-ip.net) Quit (Read error: 113 (No route to host))
  • [23:44:35] <jkridner|work> felipec: since you are the only one I've heard pushing a video to me, I'll probably put a link to it on the beagleboard.org home page. Any objections?
  • [23:50:24] <felipec> jkridner|work: please do :)
  • [23:50:53] <felipec> I'm writing a blog post about it, in case you are interested
  • [23:53:59] <ds2> less then 3 more weeks
  • [23:54:45] * robtow1 (n=rtow@nat/montavista/x-8d69ef9bccf0ae6c) Quit (Read error: 110 (Connection timed out))
  • [23:56:04] * maelcum (n=quassel@e178186060.adsl.alicedsl.de) Quit (Read error: 110 (Connection timed out))
  • [23:56:17] * Sept (n=bakljg@c-98-240-226-129.hsd1.mn.comcast.net) Quit (Read error: 110 (Connection timed out))
  • [23:59:00] * maelcum (n=quassel@e178176224.adsl.alicedsl.de) has joined #beagle